Bespoke fitted furniture across all 32 London boroughs and the City

Brent · London

Fitted Cupboards in Neasden

Fitted cupboards in Neasden: built-in cupboards for hallways, landings, utility rooms and boot rooms. We make each piece in our workshop and fit it in your home.

  • Floor-to-ceiling storage in a flat
  • Cupboards for a utility or boot room
  • A hallway cupboard for coats and shoes

Fitted cupboards designed for your room

How fitting day works

In older rooms, the furniture usually has to meet skirting, picture rails, cornice or coving. We cut and scribe the furniture around them on site, so it sits neatly against the room. How long the fitting takes depends on the size of the cupboards and the room, and the fitting days are agreed in your quote. It is useful to clear the room and the route before we arrive. On the day, we cover the floors first, then bring the sections in. Each piece is levelled, scribed where the wall wanders and fixed to suit the wall.

  1. First, you let us know about the space and what you need to store.
  2. At the design visit we measure up and talk through doors, shelves and rails. For a boiler cupboard, we plan for the clearances and ventilation in the manufacturer’s instructions.
  3. You get a written quote for the cupboards we’ve agreed.
  4. The cupboards are made at our workshop.
  5. We bring the cupboards to your home and fit them to the space. We check each door and shelf with you before we leave.

Preparing the room

  • Clear the walls of pictures and shelves
  • Check the building’s rules for trades and lift bookings
  • Have your electrician move any sockets or switches beforehand

Arranging a design visit

To get a quote for fitted cupboards in Neasden, send us a few details through our contact form. Let us know which room it is and roughly what you have in mind, plus any rough measurements. Next comes a design visit, followed by a written quote.

Arrange a design visit

Read more

How we make fitted cupboards for Neasden

Boxing in a boiler is a job that needs care. Every boiler comes with instructions on the space and ventilation around it, and the cupboard is built to respect them. We make sure the doors open fully so the boiler can be serviced, and any work on the boiler itself is for a Gas Safe registered engineer. Most enquiries start with a neat cupboard around the boiler and somewhere for coats, shoes and bags, and the answer is built in our workshop from birch ply and moisture-resistant MDF, painted by hand or sprayed.

Landings in houses from between the wars are often roomier than in a Victorian terrace, which can hold fitted storage for linen and spare bedding. Around Neasden, where interwar homes and semis are a big part of the housing, the landing is worth a look as well as the hall. Any boiler or hot water cylinder keeps the access and ventilation its maker asks for.

Where other trades are needed, for instance an electrician to move a socket, we point that out, so it can be arranged before fitting day. Our quote covers the carpentry: the design, the materials and the finish.

Location
Neasden (NW10, NW2, NW9)
Area
Brent
Price
Quoted for your room
To begin
Design visit, then a quote in writing
Making
In our workshop, then fitted in your home
Boards and paint
MDF and birch plywood, painted
When we fit
Weekdays, and Saturdays by prior arrangement
Get in touch
Our contact form
Updated
27 October 2026
Illustration of a fitted utility cupboard with shelves and a ventilated door

What it costs

There is no set price, because there’s no set room. The things that affect it are:

  • Hanging rails, shelves, drawers and other fittings inside
  • The number of doors and drawers
  • Parking and unloading on your street
  • The width and height of the space

The finish affects the cost: spray painting happens in the workshop, and hand painting can be done in your home. The written quote reflects your choice, along with the size and fittings.

Helping us understand the room

A few details help us understand the job before we visit. It is useful to include:

  • The postcode, so we can plan the visit
  • The type of home and how the room is reached
  • Rough measurements: width, height and depth
  • Examples of the look you are after

Photos help us understand the room before we visit. A few pictures showing the walls, the corners and where the ceiling meets them tell us a lot about the space, along with rough sizes. To share them, tell us about the room on our contact form, and we’ll suggest a time for a design visit.

Neasden homes and fitted cupboards

In the area around Neasden, the largest groups of homes date from between 1919 and 1939 (about 40%) and before 1919 (about 33%), on the Valuation Office Agency’s council tax figures for 2025. Each era brings its own kind of wall, ceiling height and floor, so it shapes the design from the first measurement. Part of Neasden is in a conservation area, according to Historic England’s records. Being in a conservation area mainly affects changes to the outside of a building, and fitted furniture inside a house does not normally need planning permission. If you want to be certain, ask the council’s planning team. Parking controls in London are set borough by borough, so Brent has its own. Where a street in Neasden is controlled, a van may need a visitor permit, a paid bay or a bay suspension from the council. Parking near your home is worth mentioning during the design visit.

If you live in a flat close to Brent Cross West station, it helps to book the lift and tell the concierge before fitting day. If you live near Gladstone Park, fitted cupboards can be designed to hold outdoor kit, from walking boots to picnic things.

Neasden is in the London Borough of Brent, about 2 miles south-east of Kilburn. Whether your home in Neasden is a terraced house, a flat or a newer build, the furniture is designed around the room as we find it. We cover places right across Brent, from the busiest high streets to quiet residential roads.

Every address in NW10, NW2 and NW9 is within our area for fitted cupboards, from the main roads to the quieter streets. We cover homes on streets such as Dog Lane, High Road and Ilex Road, along with the roads around them, whether you want fitted cupboards or another piece made for the room. Close by, we also work in Brent Park (1 mile west), Church End (1 mile south), Willesden (1 mile south-east), Dollis Hill (1 mile north-east) and Willesden Green (1 mile south-east). Elsewhere in Brent, we also cover Kilburn (2 miles south-east), Wembley (2 miles west), Queen's Park (2 miles south-east), Kenton (3 miles north-west), Kensal Rise (2 miles south-east) and Brondesbury (2 miles east). As one of the bigger places in Brent, Neasden is covered for fitted cupboards and everything else we make.

What’s near Neasden

Around Neasden, we cover homes near The Swaminarayan School and Crest Boys' Academy. The nearest railway station is Brent Cross West station, about 1.3 miles north-east of the centre. Nearby you will also find Neasden Hospital (0.7 miles south-west) and London Designer Outlet (1.7 miles west).

Map of Neasden © OpenStreetMap contributors

The problems fitted cupboards solve

Others want their cupboards to match the rest of the house. Painted doors with a simple frame can sit happily alongside period skirting and coving, which keeps the look calm.

Typical reasons people contact us include:

  • Boxing in a boiler with room for servicing
  • Built-in storage that matches the woodwork
  • Storage in a corner nothing else fits
  • Storage for coats and shoes in the hallway

Near listed buildings like Church of St Mary, about 0.5 miles south of the centre of Neasden, older homes may keep original joinery that fitted cupboards can be designed around. If your own home is listed, check with the council before fixing into original features.

What to check before you book

  • How doors and drawers are fitted
  • How parking will work on your street
  • Which materials they’ll use, named in the quote
  • Is it spray painted or hand painted?

Choosing a carpenter in London: a checklist

What it’s made from

Moisture-resistant MDF

We use moisture-resistant MDF for many doors and carcasses, so it suits painted cupboards. It copes well in utility rooms and on cooler external walls.

Plinths and scribe strips

We trim the edge of each cupboard to follow the wall for a close fit.

Bespoke or off-the-shelf?

There’s a place for both. In a simple space, off-the-shelf can be enough. For awkward spaces, period rooms or a built-in look, a fitted cupboard tends to earn its place. Walls in interwar houses are straighter than in older ones, but rarely perfect, so standalone furniture can still lean or leave gaps. Fitted furniture is scribed and levelled on site.

In London, parking can affect the price. The boroughs run controlled parking zones across much of the city, so a van may need a visitor permit, a paid bay or a bay suspension. Tell us about parking at the measuring visit.

Why us?

  • Made in our workshop, then fitted in your home
  • Saturday work by prior arrangement
  • We work across all London boroughs
  • Edges scribed to follow your walls

Take a look at how bespoke compares with ready-made or what to look for in a quote.

Questions we are often asked

Will a conservation area stop me having fitted cupboards fitted in Neasden?

Not normally. Conservation area controls are largely about how buildings look from outside, so fitted furniture inside a house does not normally need planning permission. If your home is listed, works inside that affect its character can require listed building consent, so check with the council first. If you are unsure, the council can confirm.

Do you cover homes near Brent Cross West station?

Yes, homes across Brent and the rest of London are within the area we cover. You can message us from the contact page to arrange a design visit.

How much time does fitting need?

The time the fitting takes depends on the size of the cupboards and the room, and the fitting days are agreed in your quote.

Can a fitted cupboard cover the meters and fuse board?

Yes, and we keep them easy to reach. Engineers and meter readers will need access, so we design doors or removable panels for that.

Do I choose the paint colour?

The choice is yours. Whichever finish you pick, it is in the colour you’ve chosen.

Will the cupboards fit my uneven walls?

Yes. Each cupboard is trimmed to the shape of the wall and set it level on adjustable feet or a plinth. It’s one of the reasons fitted joinery suits period homes.

300+ projectsCompleted in London homes
Design visit firstWe measure, then quote
Workshop-madeThen fitted in your home
MDF and birch plywoodMoisture-resistant MDF
Painted finishesSpray or hand-painted
All of London32 boroughs and the City