Brent · London
Fitted Cupboards in Brent
From one end of Brent to the other, we can design, make and fit fitted cupboards. We visit, measure and talk it through before we quote.
Talk to us about fitted cupboards in Brent
Where we work in Brent
We make built-in cupboards for hallways, landings, utility rooms and boot rooms. The lists below link to a page for each place.
Biggest places in Brent
About fitted cupboards in Brent
Boxing in a boiler is a job that needs care. The boiler maker’s instructions set out the clearances and ventilation it needs, and we design the cupboard to keep to them. We make sure the doors open fully so the boiler can be serviced, and any work on the boiler itself is for an engineer on the Gas Safe Register. We make fitted cupboards from birch ply and moisture-resistant MDF, painted by hand or sprayed, and people most often get in touch about storage for coats and shoes in the hallway and tall cupboards where space is short.
Every fitting follows the same order: floors are protected, the sections come in, everything is levelled, scribed to the walls, fixed and finished. At the end, we tidy up and go over the work with you. How long fitting takes depends on how many cupboards there are and where they go, and we confirm the fitting days in your quote.
- We start with a short note from you about the space and what it needs to hold. It might be a hallway, a landing, a utility or a boot room.
- We come to your home for a design visit, measure the space and talk through the layout. For a boiler cupboard, we plan for the clearances and ventilation in the manufacturer’s instructions.
- A written quote follows, covering the design, materials and finish.
- The cupboards are made in our workshop, from moisture-resistant MDF and birch plywood.
- The cupboards are fitted in your home and trimmed to follow the walls.
Quotes in Brent
No two rooms cost the same to furnish, because the size, the layout and the finish all vary. Spray painting and hand painting are different processes, which affects the cost. The figure comes in your written quote after the design visit.
Why work with us
- A spray or hand-painted finish
- Saturdays by prior arrangement
- Work across the whole of London
- Every quote follows a design visit
Starting with a design visit
A quote begins with a few details from you: the room, rough sizes and some photos if you have them. To send them, get in touch through our contact form. After that, we arrange a visit to measure and go through the design, then send a quote in writing.
What’s near Kilburn
We fit furniture in homes around Maida Vale School, Marylebone Boys' School and St Anne's and St Andrew's, among other places. Also close by are Queen’s Park (less than half a mile west), Salusbury Primary School (close by, under half a mile west) and The Brondesbury Arms (within half a mile south-east). Kilburn has its own railway station: Queens Park (London) station. Well-known places in the area include Paddington General Hospital (1 mile south) and Brent Museum and Archives (1.3 miles north-west). Green spaces nearby include Greville Place nature reserve.
Fitted cupboards for homes across Brent
From Kilburn, Neasden and Harlesden to the quieter streets, homes across Brent have tricky spaces worth using. It could be beneath the stairs, in a window bay, in a hallway or in the eaves. Fitted cupboards are designed for the space as it is.
Homes built between 1919 and 1939 make up about 32% of the housing in Brent, with about 28% built before 1919, on the Valuation Office Agency’s council tax figures for 2025. For carpentry, the era of a house is a useful clue to how square its rooms are and what its walls are made of. Around a third of the homes in Brent (about 32%) date from between 1919 and 1939, in the VOA’s 2025 council tax stock figures. Interwar houses often have room in the hall and the box room for fitted cupboards. 29 of the 29 places in Brent with their own pages here have their centre inside a conservation area, according to Historic England’s data. Conservation area controls are largely about how buildings look from outside, so fitted furniture inside a house does not normally need planning permission.
In London, the route into a home matters as much as the room, so the way in is measured along with the room.
Kilburn: Near listed buildings like Church of St Augustine, about 0.6 miles south-east of the centre of Kilburn, older homes may keep original joinery that fitted cupboards can be designed around. For a listed home, fixing into original features may need listed building consent. For an older house near St Anne's and St Andrew's, a shallow cupboard in a narrow hall can hold coats without blocking the way.
Bespoke fitted cupboards or ready-made?
Ready-made units are made in fixed sizes, and the space around them is often wasted. Ours are built to the full width and height you choose, which can add a good deal of storage.
Before you hire any carpenter
- Whether they measure the room themselves
- Will the doors close with even gaps?
- Which materials they’ll use, named in the quote
- How the furniture will be finished, and where
Flats, conversions and lettings
Many London terraces have been converted into flats, and that often means a shared hallway and a tight turn on the stairs. We plan the size of each section around it, after measuring the route during the design visit.
For a rented home, access for the design visit and fitting day has to be agreed with the tenants, at times that suit them. A letting agent can arrange this on a landlord’s behalf.
What affects the price in Brent
The price for your room depends on:
- The number of doors and drawers
- The finish: spray painted or hand painted
- The width and height of the space
- The internal fittings
Prices are quoted for your room, once we’ve measured and talked through the design. Size, the number of doors and drawers and the internal fittings make the biggest difference to the price.
Before the design visit
A little information at the start saves time later. Where you can, include:
- Anything in the way, such as radiators, sockets, switches, a boiler or meters
- Examples of the look you are after
- Pictures of the whole wall or room, including the floor and ceiling
- Rough sizes: width, height and depth
For a quote for fitted cupboards in Brent, drop us a line using the contact form. Let us know the room and the rough idea, with sizes if you have them. We’ll arrange a design visit, then send a quote in writing.
Why people ask for fitted cupboards in Brent
Moving into a flat often shows how little built-in storage there is. A cupboard in the hallway or a spare recess can change how the home works, particularly when it uses the full height of the room.
Common reasons to get in touch include:
- Storage for towels and bedding
- Tidying away the gas and electricity meters
- A boiler cupboard that keeps access clear
- Using the full height of a room
Boards, parts and paint
Birch plywood
Birch plywood suits carcasses that carry a lot of weight, like those in a utility room.
Moisture-resistant MDF
Most painted cupboard doors we make are moisture-resistant MDF, as it stays stable and finishes evenly.
Common questions about fitted cupboards
Can you build a cupboard around a boiler?
Yes, as long as the design respects the boiler’s instructions. We plan the space and ventilation around it and keep access clear for the engineer.
How are fitted cupboards priced?
Prices are quoted for your room, once we’ve measured and talked through the design. The size, the inside layout and the finish all make a difference. To arrange a design visit, message us from the contact page.
Do pictures help?
Yes, they help. Photos of the whole wall or room, including the floor and ceiling, give us a good idea of the space. You can send them when you message us from the contact page.
Can you hide my gas and electricity meters?
Yes, and we keep them easy to reach. Meter readers and engineers need to get to them, so we design doors or removable panels for that.
Does someone need to be home during the fitting?
Someone needs to let us in at the start of the day. It also helps to have someone around at the end, so we can go over the finished furniture together.
What are the cupboards made of?
Our cupboards are made from moisture-resistant MDF and birch plywood, then spray painted or hand painted. The materials and finish are agreed in your quote.
What happens when you come to measure?
We take full measurements, look at the walls and floors and work through the design together. Access and parking are worth talking about too, and afterwards we send a written quote.