Bromley · London
Petts Wood Fitted Cupboards
Fitted cupboards for your home in Petts Wood: built-in cupboards for hallways, landings, utility rooms and boot rooms. Each piece is designed at a visit to your home, made at our workshop and fitted by us.
- Space for laundry, cleaning things and boots
- Tidying away the gas and electricity meters
- A hallway cupboard for coats and shoes
Need fitted cupboards in Petts Wood?
Fitting day, step by step
Once the main sections are fixed in place, any doors go on and any drawers or lids are fitted. We adjust each one so the gaps line up and it closes cleanly, and then we check it all again. How long fitting takes depends on how many cupboards there are and where they go, and we confirm the fitting days in your quote. Clearing the room and the way in beforehand helps the day run well. Fitting day starts with protecting the floors and setting out the pieces. The pieces are levelled, fitted to the walls and fixed back.
- It starts with a short note from you.
- We visit to measure up and discuss the design.
- A written quote follows.
- We make the cupboards in our workshop from moisture-resistant MDF and birch plywood.
- We fit the cupboards and trim the edges to follow the walls and ceiling.
- Your finish is sprayed beforehand or painted by hand on site; go gently with it at first while it cures.
Getting ready for fitting day
- Let us know where the boiler and meters are
- Leave a clear route from the front door to the room
- Clear the area where the furniture is going
Ask for a quote
A quote begins with some details from you: the room, rough sizes and some pictures if you have them. To send them, drop us a line using the contact form. After that, we arrange a visit to measure and go through the design, then send a quote in writing.
Advice
Fitted cupboards in Petts Wood
Utility rooms and boot rooms need storage that copes with everyday wear. We can build tall cupboards for the vacuum, ironing board and mop, alongside spaces for the washing machine and dryer you choose. Plumbing is for your plumber and new sockets for your electrician, so we plan the cupboards around their work. If you are living with a hallway cupboard for coats and shoes and tidying away the gas and electricity meters, fitted cupboards made from moisture-resistant MDF and birch plywood, spray-painted or hand-painted can solve it.
If you live in one of the interwar houses or semis around Petts Wood, the hallway may be wider than in a Victorian terrace, with room for a cupboard by the door. Bays at the front suit a seat with storage below, with a grille where there’s a radiator underneath. Fitted cupboards are measured and made for the house you have.
The written quote puts the design visit in writing: the layout and internal fittings, the materials and the finish. If something is not quite right, tell us before anything is made.
- Where
- Petts Wood (BR5, BR6, BR2)
- Borough
- Bromley
- Cost
- Quoted for your room
- To begin
- Design visit, then a quote in writing
- Where it is made
- In our workshop, then fitted in your home
- Materials and finish
- MDF and birch plywood, painted
- When we fit
- Monday to Friday; Saturdays by prior arrangement
- Enquiries
- Our contact form
- Last updated
- 27 October 2026
Bespoke or off-the-shelf?
It’s worth being honest about cost: off-the-shelf furniture typically costs less up front. Bespoke earns its place where the room is tricky, space is tight or you want the furniture to look part of the house.
Shop-bought shelves can sag over a long span. Span, depth and the weight on it decide whether a shelf sags, so a long run needs a thicker shelf, a stiffening lip or a support. That is something we plan for in the design.
Making use of tricky spaces in Petts Wood
The biggest shares of homes in the neighbourhood around Petts Wood were built between 1919 and 1939 (about 71%) and between 1945 and 1972 (about 21%), going by the Valuation Office Agency’s 2025 council tax figures. We take that into account at the design visit, since older and newer walls take different fixings. The centre of Petts Wood is within about a quarter of a mile of the Station Square, Petts Wood Conservation Area. Conservation area rules mainly cover the outside of buildings, so fitted furniture inside a house doesn’t normally need planning permission. Your council can advise if you’re unsure. Detached and semi-detached houses are home to about 87% of households in the streets around Petts Wood, in the ONS Census 2021 figures. A house like that usually has more rooms to plan around than a flat, and sometimes a driveway that makes unloading easier.
Close to Jubilee Country Park? Living near green space often means muddy boots, bikes and outdoor kit, and fitted cupboards can give those things a place. If your home is one of the older houses near St Francis Church, an old boiler or airing cupboard can be rebuilt with proper shelves.
Petts Wood is part of the London Borough of Bromley, about 1 mile east of Orpington. We design and make fitted cupboards for homes in Petts Wood, as part of our work in every London borough. Our work takes in places right across Bromley, from the busiest high streets to quiet residential roads.
Every home in BR5, BR6 and BR2 is covered for fitted cupboards, from the main roads to the quieter streets. Our area takes in homes on streets such as Tent Peg Lane, Ryecroft Road and Beaumont Road, along with the roads around them, for fitted cupboards and any of our other fitted furniture. If you are just outside Petts Wood, we also cover Crofton (1 mile south), Broom Hill (1 mile south-east), Southborough (1 mile west), Locksbottom (1 mile south-west) and Bromley Common (2 miles west). Elsewhere in Bromley, we also cover Bromley (3 miles west), Beckenham (5 miles west), Chislehurst (2 miles north), Penge (6 miles west), Anerley (6 miles west) and Crystal Palace (7 miles west).
Near you in Petts Wood
Our area takes in the homes around Daylight Inn and Bromley High School and the streets around them. There is a railway station in Petts Wood itself: Petts Wood station. Nearby you will also find Bridgeways Day Hospital (1.5 miles west) and Crofton Roman Villa (1.2 miles south-east). Open spaces near Petts Wood include Summer Hill.
What we don’t do
We design, make and fit the furniture. In practice, that means:
- Plastering, decorating or repairs to the walls
- Work on a boiler, which is for a Gas Safe registered engineer
- Connecting appliances to water or waste
Not sure whether your space suits fitted cupboards? You can use our contact form and we will tell you before you arrange a visit. Our process from visit to fitting.
What goes into it
- Moisture-resistant MDF
- Hand-painted finish
- Spray-painted finish
- Ventilated doors
- Birch plywood
- Adjustable shelves
Is it time for fitted cupboards?
Some people want to hide a boiler, meter or fuse board. They are not much to look at, yet they must stay easy to reach, and that shapes the design. We plan the doors, panels and ventilation with that in mind.
Most of the enquiries we get are about needs like these:
- Storage in a corner nothing else fits
- A neat cupboard around the boiler
- Space for laundry, cleaning things and boots
- A hallway cupboard for coats and shoes
Near listed buildings like The Daylight Inn, less than half a mile north-west of the centre of Petts Wood, older homes may keep original joinery that fitted cupboards can be designed around. For a listed home, fixing into original features may need listed building consent.
Before you hire any carpenter
- Is it spray painted or hand painted?
- Which materials they’ll use, named in the quote
- Whether they can show you real projects they’ve done
- Whether they measure the room themselves
Why bespoke in Petts Wood?
A flat-pack or ready-made cupboard is quick to buy and often cheaper, and in a square room they can work well. Where walls lean and floors slope, they rarely sit flush. A fitted cupboard costs more but follows the room. Even in a 1930s house, walls and floors aren’t perfectly true, so standalone furniture can still lean or leave gaps. Built-in pieces are adjusted to the room on site.
Because every job is different, the cost is set out in a written quote after the visit. Size, the number of doors and drawers and the internal fittings make the biggest difference to the price.
Why work with us in Petts Wood
- Built around your room
- Made in our workshop, then fitted in your home
- A spray or hand-painted finish
- Over 300 projects completed
Take a look at bespoke vs off-the-shelf or what a quote should include.
FAQs: fitted cupboards in Petts Wood
Can you make fitted cupboards for a home in Petts Wood?
Yes, Petts Wood is within the area we cover, which takes in all of Bromley and the rest of London. We start with a design visit to measure the room and talk through what you need, and then we send a quote.
Does a conservation area in or near Petts Wood affect fitted furniture?
Normally not: conservation area rules mainly cover the outside of buildings, and fitted furniture inside a house doesn’t normally need planning permission. Listed buildings are different, as works inside that affect their character can require listed building consent from the council. If you’re unsure, the council can confirm.
Will a fitted cupboard work on a sloping floor?
Yes. We scribe each cupboard to follow the wall and set it level on adjustable feet or a plinth. It’s one of the reasons fitted joinery suits period homes.
Can I send photos ahead of the visit?
Yes. Pictures help us understand the room before the design visit. It helps to show radiators, sockets and anything else on the wall.
What finishes do you offer?
There are two choices: a spray finish from the workshop, which is smooth and even, or hand painting, which can be done in your home. Your quote sets out which you have chosen.
What if the stairs or lift are small?
It is made in sections, sized for the route along with the room itself. At the design visit, we measure the route along with the room itself.