Merton · London
Fitted cupboards in Raynes Park, Merton
We make fitted cupboards for homes in Raynes Park, designed around the room you have. We design your fitted cupboard at a visit to your home, make it in our workshop and fit it.
- Hiding meters and a fuse board neatly
- Landing shelves for bedding and towels
- A boiler cupboard that keeps access clear
Fitted cupboards for your home in Raynes Park
Fitted cupboards in Raynes Park: local notes
About 48% of the homes in the neighbourhood around Raynes Park went up between 1919 and 1939, and about 25% before 1919, based on the Valuation Office Agency’s 2025 council tax data. Knowing roughly when a home was built helps, because walls and fixings change from one era to the next. Within a mile of the centre of Raynes Park, 6 conservation areas are recorded by Historic England. Historic England says England has around 10,000, and the controls mainly cover the outside of buildings. TfL’s red routes have strict stopping rules. If your home is on or just off a main road, it helps to mention it. We will plan where the van can stop.
For families living near West Wimbledon Primary School, fitted cupboards can give school bags, shoes and sports kit a proper home. For an older house near St Saviour's Church, a shallow cupboard in a narrow hall can hold coats without blocking the way. Southside House, about 0.9 miles north, is one of the historic houses in the wider area. If your own home is a period one, hallway recesses and alcoves are where fitted cupboards earn their keep.
Raynes Park is about 2 miles north-east of Wimbledon, part of the London Borough of Merton. Homes in Raynes Park are part of the area we cover for fitted cupboards. Our work takes in places right across Merton, from the busiest high streets to quiet residential roads.
Here we cover the SW20, KT3 and SM4 postcode area for fitted cupboards. If your home is on a street like Gore Road, Edna Road and Wyke Road, or close by, we can arrange a design visit for fitted cupboards. Raynes Park is near the A238 and A298; on busy main roads, unloading fitted cupboards takes a little planning. Close by, we also work in West Barnes (1 mile south-west), Bushey Mead (1 mile north-east), Cannon Hill (1 mile east), Motspur Park (1 mile north-west) and Wimbledon Chase (1 mile north-east). Other parts of Merton we cover include Wimbledon (2 miles north-east), Colliers Wood (3 miles east), Eastfields (3 miles east), South Wimbledon (2 miles north-east), Merton Abbey (2 miles east) and Mitcham (3 miles east).
Local landmarks in Raynes Park
Our area takes in the homes around Raynes Park High School, The Raynes Park Tavern and Ursuline Preparatory School, among other places. Raynes Park has its own railway station: Raynes Park station. Well-known places in the area include Atkinson Morley Hospital (1 mile north) and Wimbledon Museum (1.5 miles north-east). Green spaces nearby include Derwent Floodwash.
Fitted cupboards in Raynes Park
A boiler cupboard needs more thought than most. The boiler maker’s instructions set out the clearances and ventilation it needs, and we design the cupboard to keep to them. Doors open wide enough for servicing, while any work on the boiler is for a Gas Safe registered engineer. We make fitted cupboards from birch ply and moisture-resistant MDF, painted by hand or sprayed, and the things people most often want solved are using the full height of a room and a neat cupboard around the boiler.
Around Raynes Park, with interwar houses or semis making up much of the housing, the hall is often wide enough for coat and shoe storage. Bay windows suit seating with drawers or lift-up lids, with a grille so any radiator below keeps heating the room. Fitted cupboards are measured and made for the house you have.
Our quotes are written in plain words. They say what will be made, what it’s made from and how it will be finished, taken from what we agreed at the visit.
- Location
- Raynes Park (SW20, KT3, SM4)
- Borough
- Merton
- Price
- Quoted for your room
- How it starts
- A design visit: we measure and talk it through
- Where it is made
- Workshop-made, then fitted
- Materials and finish
- MDF and birch plywood, painted
- When we fit
- Weekdays; Saturdays on request
- Enquiries
- Our contact form
- Page updated
- 27 October 2026
Places near Raynes Park
What else we make in Raynes Park
Flats, conversions and lettings
In a managed block, the building manager or concierge may need notice before we arrive. Lifts sometimes need to be booked, and the lift size helps decide how big each section can be. Let us know about it when you contact us.
We also make and fit furniture for landlords furnishing a let. The materials are the same as for any home: moisture-resistant MDF and birch plywood.
Questions we are often asked
Will parking be an issue for fitting furniture in Raynes Park?
It can be, depending on whether your street is in a controlled parking zone. A van may need a visitor permit, a pay-and-display bay or a suspended bay, which the council arranges, often with notice. Let us know what parking is near you during the design visit.
Do you cover homes near Raynes Park station?
Yes. We cover all of Merton and the rest of London. You can use our contact form to arrange a design visit, and tell us about parking and access at the same time.
Do I need to be at home on fitting day?
We need someone to let us in. It also helps to have someone around at the end, so we can go over the finished furniture together.
Will the cupboards fit my uneven walls?
Yes. Each cupboard is trimmed to the shape of the wall and set it level on adjustable feet or a plinth. It’s one of the reasons fitted joinery suits period homes.
Do you work on Saturdays?
Yes, Saturdays are possible by arrangement. Let us know when you first get in touch.
Can you hide my gas and electricity meters?
Yes, and we keep them easy to reach. Engineers and meter readers will need access, so we design doors or removable panels for that.
How we price fitted cupboards
The price for your room depends on:
- The overall size of the piece
- Where a van can park, such as a permit bay or a bay suspension
- Hanging rails, shelves, drawers and other fittings inside
- Doors and drawers, and how many
Rooms that aren’t square take more work: uneven walls, sloping floors and angled ceilings all add scribing and cutting on site. That is reflected in the quote, written once we have measured up.
Helping us understand the room
To give us a picture of the room, it helps to include:
- The postcode, so we can plan the visit
- What kind of home it is, and which floor the room is on
- Radiators, sockets, pipes or meters on or near the wall
- Pictures of styles you like, if you have any
For a quote for fitted cupboards in Raynes Park, send us a few details through our contact form. Let us know the room and the rough idea, with sizes if you have them. Next comes a design visit, followed by a written quote.
From workshop to your room
Fitting day follows a set order: floors are protected, the sections come in, everything is levelled, scribed to the walls, fixed and finished. At the end, we tidy up and go over the work with you. How long the fitting takes depends on how many cupboards there are and where they go, and your quote sets out the fitting days. Some interwar and suburban streets have driveways, which can make unloading easier, so it’s worth mentioning at the measuring visit. Otherwise, a visitor permit or a nearby bay helps. Floors and doorways are protected while the pieces come in.
- You get in touch and describe the space.
- At the design visit we plan the cupboards and check how the sections will get in. It helps to let us know about parking then, as a van normally needs a permit or a paid bay in a controlled parking zone.
- We send a quote in writing.
- The cupboards are built in our workshop from moisture-resistant MDF and birch plywood, in sections sized for the route.
- The sections are carried in, joined and set level. The finish is sprayed before fitting or painted by hand on site.
Before fitting day
- If you live in a block, book the lift and tell the building manager
- Point out meters, boilers and fuse boards near the furniture
- Leave a clear route from the front door to the room
Arranging a design visit
Getting a quote starts with a few details: the room, rough measurements and some photos if you have them. When you’re ready, send us a few details through our contact form. After that, we arrange a visit to measure and discuss the design, then send a quote in writing.
Read more
Practical tips
Because fitted furniture stays put, a little upkeep goes a long way. A few pointers help:
- Have damp sorted before fitting
- Check your lease if you live in a flat
- Make a note of what needs a home
- Let us know how parking works on your street
Over time, you may want to move a shelf or add a rail. Where we’ve fitted adjustable shelves, you can move them as needed, so the space keeps working.
At the design visit, let us know how parking and access work. Much of London has controlled parking, and blocks of flats can have rules about lifts and deliveries.
Could you do it yourself?
Shop-bought shelves can sag over a long span. Span, depth and the weight on it decide whether a shelf sags, so a long run needs a thicker shelf, a stiffening lip or a support. That’s something we plan for in the design.
Off-the-shelf cupboards come in fixed sizes, so there is often a strip of wasted space at the side or above. Furniture we make is built to the room’s own sizes, so it can use the full height and width.