Example photo by POOJAN THANEKAR on Unsplash, not our project
Barnet · London
Golders Green Fitted Home Offices
For homes in Golders Green, we make fitted home offices from moisture-resistant MDF and birch plywood. The finish is spray painted or hand painted, in a colour agreed with you.
- Wanting to close the door on work at the end of the day
- An alcove or landing that could take a desk
- No proper place to work from home
Need fitted home offices in Golders Green?
Common questions about fitted home offices
Do you make fitted home offices for homes in Golders Green?
Yes, we work across Barnet, Golders Green included, and across the rest of London. To get started, you can send us a few details through our contact form with a few details.
Does a conservation area in or near Golders Green affect fitted furniture?
Not normally. Conservation area controls are mostly concerned with the outside of buildings, so fitted furniture inside a house does not normally need planning permission. Listed buildings are different, as works inside that affect their character may need listed building consent from the council. If you are unsure, the council can confirm.
How long is the fitting for a home office?
How long fitting takes depends on the layout and how many pieces make up the office, and your quote sets out the fitting days. The office is made at our workshop first, so the time in your home is spent fitting. We keep the room as tidy as possible while we work.
How is the furniture painted?
You can choose between two finishes: by spray or by hand. A spray finish is smooth and even, while a hand-painted one is easy to touch up later.
Do photos help?
Yes, they help. A few pictures of the room, from floor to ceiling, tell us a lot. To send them, fill in our short enquiry form.
What do you do at the measuring visit?
We take full measurements, look at the walls and floors and work through the design together. Access and parking are worth talking about too, and afterwards we send a quote in writing.
About our fitted home offices in Golders Green
Everything in a home office starts with the desk. We make it to a height and depth that suit you, your chair and your screen, with storage below where it helps. Shelves and cupboards can be planned around it. The design visit in Golders Green is where these choices are made. We make home offices from moisture-resistant MDF and birch plywood, finished by spray or by hand, and the things people most often want solved are a room with two jobs to do and cables trailing across the desk and floor.
In streets where many homes were built before 1919, as they were around Golders Green, a small back bedroom or the box room often becomes the office. A built-in desk, shelving and closed storage can fit even a modest room. Cable routes are planned so they run neatly to the sockets, and any new sockets are for your electrician.
We write quotes in plain English, without jargon. You’ll see what will be made, the boards used and the finish.
- Place
- Golders Green (NW11, NW2, NW3)
- Borough
- Barnet
- Cost
- Quoted for your room
- To begin
- Design visit, then a quote in writing
- Making
- Workshop-made, then fitted
- Materials and finish
- Painted MDF and birch ply
- When we fit
- Weekdays; Saturdays on request
- Enquiries
- Our contact form
- Page updated
- 27 October 2026
How we price fitted home offices
The price reflects the time and materials the job needs. That depends on:
- What goes inside: rails, shelves, drawers and dividers
- The overall size of the piece
- Spray painting or hand painting
- Stairs, lifts and the route to the room
We do not publish set prices, because each job is designed for a single room. We measure up, discuss the design and send a quote in writing, naming the materials and finish. To start, drop us a line using the contact form.
What we need to know
Ahead of the design visit, we’ll usually ask about:
- Rough sizes, even if they’re only to the nearest few centimetres
- The type of home and how the room is reached
- What the furniture needs to hold
- Examples of the look you are after
If you already have something in mind, tell us; if you do not, that’s fine, and we can work it out together. The design is talked through at the visit, once we’ve measured, and the written quote then sets it out. To arrange a visit, fill in our short enquiry form.
What happens on fitting day
Before anything is fixed, we set the furniture level. Where the floor slopes, we bring the furniture up to level on adjustable feet or a plinth. After that, it’s fixed to the wall using fixings that suit the wall, whether that is solid brick, lath and plaster or plasterboard. On fitting day in an older house, the main job is scribing to walls and levelling on floors that slope, so there’s some trimming and adjusting on site. We protect the floors and keep dust to a minimum. Parking can be tight on terraced streets, so let us know about permits and bays during the design visit.
- It starts when you get in touch with some details about the space, including the equipment you use.
- We come to measure and work out where the desk, shelves and cable routes should go. New sockets are for your electrician, so it helps to think about them early.
- You receive a written quote for the office we have discussed.
- We make every part in our workshop, sized for the room and the route in.
- We bring it to your home, fit it and leave it ready to use.
Getting ready for fitting day
- Point out meters, boilers and fuse boards near the furniture
- Check the building’s rules for trades and lift bookings
- Move furniture and belongings away from the wall
How to get a quote
The design visit is where every quote starts. We measure the room properly, check how the walls and floors run and talk through the design with you. A written quote follows the visit for you to look over. To book one, use our contact form.
Related advice
Neighbourhoods near Golders Green
Also in Golders Green
Home working in Golders Green: local notes
In the neighbourhood around Golders Green, the largest groups of homes date from before 1919 (about 52%) and between 1919 and 1939 (about 26%), based on the Valuation Office Agency’s 2025 council tax data. For carpentry, the era of a house is a useful clue to how square its rooms are and what its walls are made of. Near the centre of Golders Green, Historic England’s list includes Church of St Jude (Grade I), about 0.6 miles north-east, and Waterlow Court (Grade II*), under half a mile east. Listing covers the inside of a building as well as the outside, so works that affect a listed home’s character, like removing original joinery, may need listed building consent. Ask the council’s conservation officer before anything is fixed. More than half of the homes in the streets around Golders Green (about 52%) were built before 1919, based on the Valuation Office Agency’s 2025 council tax data. Houses of that age often have alcoves beside a chimney breast that can take a desk, with shelving above.
If you live near Childs Hill Park, a desk facing a window makes the most of the daylight. For an older house near Church of St Alban the Martyr, a small back bedroom can become a home office with a desk under the window. Living in a block of flats near Cricklewood station? Then check any building rules on lifts and working hours early, and the sections will be sized for the way in.
Golders Green is within the London Borough of Barnet, about 2 miles north of Finchley. Whether your home in Golders Green is a terraced house, a flat or a newer build, the furniture is designed around the room as we find it. Golders Green is one of the places in Barnet where we make fitted home offices.
We cover every part of the NW11, NW2 and NW3 postcode area. If your home is on a street such as Nant Road, Hoop Lane and Park Avenue, or close by, we can visit to measure up for fitted home offices. We also cover the places around Golders Green: Temple Fortune (1 mile north), Childs Hill (1 mile south), North End (1 mile south-east), Hampstead Garden Suburb (1 mile north-east) and Vale of Health (1 mile south-east). Other parts of Barnet we cover include Finchley (2 miles north), Barnet (5 miles north), Burnt Oak (4 miles north-west), East Finchley (2 miles north-east), Whetstone (4 miles north) and Edgware (4 miles north-west).
Near you in Golders Green
In Golders Green, that includes homes near The Old Bull and Bush pub, The Henrietta Barnett School and The King Alfred School and the streets around them. The closest station to Golders Green is Cricklewood station, roughly 1.2 miles south-west. Well-known places in the area include Brent Cross Shopping Centre (1.1 miles west) and Kenwood House (1.3 miles east). Open spaces near Golders Green include Turner's Wood.
When is bespoke worth it?
Where bespoke earns its keep is in rooms that aren’t square. In period homes, walls lean, floors slope and the alcoves on each side are often different widths.
Cost matters, and it’s fair to say so: flat-pack is typically cheaper to buy. Bespoke makes more sense where the room is tricky, the space is valuable or you want the furniture to look built in.
Practical tips
People planning fitted home offices often ask about these. They’re worth knowing before and after fitting:
- Estimate the shelf space you will need
- Look at the window and where the light falls
- Let us know about parking near your home
- Note what sits on and around your desk
A hand-painted finish is easy to touch up if it gets marked. It is worth keeping a record of the paint colour. Should you have a question about the office, drop us a line using the contact form and we’ll help.
Keep cables in their routes rather than pulled across the desk. Tight cables can mark edges over time. A little tidying now and then keeps the office calm.
Bespoke or off-the-shelf?
Off-the-shelf desks leave you to work out the cables. With a bespoke desk, cable routes are part of the design. That keeps the desk and the floor tidy. Tall standalone furniture needs fixing back to the wall so it cannot tip, and in an older house that can mean fixing into brick or lath and plaster. With fitted pieces, the fixings are planned for the wall from the start.
The finish affects the cost: spray painting happens in the workshop, and hand painting can be done in your home. The written quote reflects your choice, along with the size and fittings.
Why us?
- A spray or hand-painted finish
- Saturday visits and fitting by prior arrangement
- We visit, measure and go through the design before we quote
- Made in our workshop, then fitted in your home
Take a look at how bespoke compares with ready-made or what a quote should include.