Example photo by Kirsten Miles on Unsplash, not our project
Hackney · London
Loft Storage in Homerton
Few London rooms are perfectly square, and we scribe the furniture to follow the walls. We make loft storage for homes in Homerton, each designed at a visit to your home.
- Needing storage in a loft office
- No wardrobe that fits under the slope
- Ready-made wardrobes too big for the stairs
Need loft storage in Homerton?
Practical tips
A little care keeps the finish looking good. Here are our suggestions:
- Think about how you will reach into the eaves
- Note any vents or insulation in the eaves
- Empty the eaves so we can see what’s behind
- Check the route up to the loft
Before we leave, we check every door and drawer with you. If there is an access door to the eaves, we make sure it opens fully. That way, everything works as planned.
Check now and then that handles and hinges are tight. A loose screw is easy to tighten before it works loose. If something stops working smoothly, message us from the contact page and describe it.
How we make loft storage for Homerton
A loft room can hold a great deal of storage, if the low spaces are used well. Our loft storage includes eaves cupboards, knee-wall drawers, wardrobes under sloping ceilings and dormer shelving, each shaped to the room. For a home in Homerton, it starts with a design visit to measure and talk it through. If you are living with space under the eaves going to waste and furniture that can’t get up to the loft, eaves cupboards made from moisture-resistant MDF and strong birch plywood, with a painted finish can solve it.
Purpose-built flats are home to most households around Homerton, and in a flat, the hall, the recesses and the windows are where extra storage normally goes. Eaves cupboards are made in sections that fit the stairs, lift and doors, then assembled in place. If a boiler or consumer unit sits in a cupboard, it keeps its clearances and access.
If the job needs another trade, such as an electrician or a plumber, we will tell you. Our quote covers the carpentry: the design, the materials and the finish.
- Place
- Homerton (E5, E9, E8)
- Area
- Hackney
- Prices
- Quoted for your room
- First step
- Design visit, then a written quote
- Made
- Workshop-made, then fitted
- Boards and paint
- MDF and birch plywood, painted
- When we fit
- Weekdays (Saturdays if arranged)
- Enquiries
- Send us a message
- Page updated
- 27 October 2026
Nearby places to Homerton
More for homes in Homerton
Bespoke loft storage or ready-made?
Ready-made wardrobes and cupboards are built for standard rooms. Under a slope, it leaves large gaps and wasted space. Storage made for the loft follows its shape. It costs more than off-the-shelf furniture, and what you gain is the space a standard piece can’t reach. Standalone furniture takes up floor without using the height of the room. Built-in pieces use the full height and the awkward corners, leaving more floor clear.
How it’s painted is part of the price: spray painting happens in the workshop, and hand painting can be done in your home. The written quote reflects your choice, along with the size and fittings.
What you get with us
- Built in our workshop and fitted in your home
- Edges scribed to follow your walls
- Every London borough and the City of London covered
- Moisture-resistant MDF and birch plywood
Take a look at bespoke vs off-the-shelf or what a quote should include.
Homerton homes and loft storage
The biggest shares of homes in the area around Homerton were built before 1919 (about 37%) and between 1945 and 1972 (about 21%), according to Valuation Office Agency council tax figures (2025). That matters for eaves cupboards, as the build era decides whether a wall is solid brick, lath and plaster, block or plasterboard. There are 71 entries on the National Heritage List within half a mile of the centre of Homerton. Original fireplaces, shutters and panelling are worth keeping where they survive, and the furniture can be designed around them rather than over them. Much of inner London is covered by controlled parking zones run by the boroughs. In Homerton, a van will typically need a visitor permit, a paid bay or a suspended bay, and the council arranges suspensions, often with notice. Parking is worth mentioning at the design visit, and we’ll plan around it.
The wider area includes historic houses such as Sutton House, about 0.3 miles south-west. If your own home is a period one, a dormer in a converted loft can hold shelves or a small desk. For families living near Rushmore Primary School, deep drawers suit the bulky things families collect, from scooters to swimming kit. Near listed buildings like United Reformed Church, under half a mile west of the centre of Homerton, older homes may keep original joinery that eaves cupboards can be designed around. For a listed home, fixing into original features can need listed building consent.
Homerton is about 2 miles south-west of Shoreditch, in the London Borough of Hackney. Design visits and fitting in Homerton can be on a Saturday, by prior arrangement. Our Hackney coverage includes Homerton, along with the rest of the borough.
Every home in E5, E9 and E8 is covered for loft storage. We cover homes on streets like Muir Road, Glyn Road and Rowe Lane, along with the roads around them, whether you want loft storage or another piece made for the room. Homerton sits close to the A107 and A1207, and we plan where the van can stop before fitting day. Neighbouring places we cover for loft storage include Lower Clapton (1 mile north), Hackney (1 mile south), Clapton (1 mile north-west), Lea Bridge (1 mile north) and Hackney Marshes (1 mile north-east). We also make loft storage in nearby places like Shoreditch (2 miles south-west), Hoxton (2 miles south-west), De Beauvoir Town (2 miles west), Stoke Newington (2 miles north-west), Haggerston (2 miles south-west) and Stamford Hill (2 miles north-west). Homerton is among the bigger places we cover in Hackney.
Around Homerton
Our area takes in the homes around The City Academy, Newcome's School and The Plough Inn. There is a railway station in Homerton itself: Homerton station. A little further out are Hackney Walk (under half a mile south-west) and Homerton University Hospital (less than half a mile south).
Your questions about loft storage in Homerton
Do I need permission for fitted furniture in a conservation area?
Not normally. Conservation area controls are mostly concerned with the outside of buildings, so fitted furniture inside a house does not normally need planning permission. Listed buildings are different, as works inside that affect their character can require listed building consent from the council. The council’s planning or conservation team can tell you if in doubt.
Is parking a problem for fitting in Homerton?
It can be, as controlled parking zones cover much of inner London. Depending on the street, a visitor permit, a paid bay or a bay suspension through the council may be needed, and suspensions often need notice. Let us know what parking is near you during the design visit.
Will cupboards in the eaves stop air moving?
It shouldn’t, if it is designed properly. We design eaves storage so it does not block ventilation or squash insulation. If you have concerns about what’s already behind the eaves, it is worth asking whoever converted the loft.
Do you do plastering or decorating?
No. We don’t plaster or decorate, so any work on the walls is for a plasterer or decorator. We finish the furniture itself, as set out in your quote.
Can you build a wardrobe under a sloping ceiling?
Yes. A wardrobe made for the slope fits where a standard one can’t. The tall end takes hanging space, and the low end can hold shelves or drawers. It’s scribed to the slope and walls.
Can the fitting be on a Saturday?
Yes, Saturdays are possible by arrangement. Let us know when you first get in touch, and we will see what we can do.
Could you do it yourself?
If you are handy, a simple shelf or a standard wardrobe in a square room is a reasonable DIY job. Sloping ceilings, uneven floors and lath-and-plaster walls make it harder, where scribing and fixings that suit the wall are important.
Off-the-shelf furniture can be a sensible choice. If the walls are straight and the space suits standard sizes, it often does the job, and it’s quick to buy.
How fitting works for loft storage
You are welcome to ask questions while we work. The design, materials and finish were settled before anything was made, so fitting day is about putting it in place carefully and leaving everything tidy. The time the fitting takes depends on the shape of the room and the number of cupboards and drawers, and the fitting days are agreed in your quote. Sections come into the flat in the order they’re fitted, so the flat doesn’t fill up. Floors are covered and dust is kept down. The fixings suit each wall, whether solid or stud.
- It starts with a few details from you.
- At the design visit we measure up and agree the layout and colour.
- A written quote follows.
- We make the cupboards and drawers in our workshop from moisture-resistant MDF and birch plywood.
- The storage is fitted and scribed to the slopes, and any hand painting is done on site.
- Go easy on new paintwork while it cures; hand-painted surfaces are easy to touch up later.
Getting ready for fitting day
- Clear the walls of pictures and shelves
- Keep pets out of the room and the hallway
- Move anything in the hall or on the stairs out of the way
How to get a quote
The design visit is where every quote starts. We measure the room properly, check how the walls and floors run and discuss the design with you. Afterwards, we send a quote in writing for you to look over. To arrange the visit, send us a few details through our contact form.
Related advice
Honest limits
We make and fit furniture, and we don’t do electrics, plumbing, gas, plastering or structural work. Please bear these in mind too:
- Converting the loft itself, which isn’t our work
- Structural changes, such as cutting into rafters or joists
- Insulation or ventilation work behind the eaves
If in doubt, you can drop us a line using the contact form and describe the room. Our process from visit to fitting.
Materials and parts
- Eaves doors and drawers
- Spray-painted finish
- Birch plywood
- Sloped wardrobe tops
- Moisture-resistant MDF
- Hand-painted finish