Example photo by Kirsten Miles on Unsplash, not our project
Harrow · London
Loft Storage in Queensbury
For homes in Queensbury, we make loft storage from moisture-resistant MDF and birch plywood. The finish is spray painted or hand painted, in a colour agreed with you.
- A boarded loft that is hard to keep organised
- Furniture that cannot get up to the loft
- No wardrobe that fits under the slope
Loft storage designed for your room
Queensbury homes and loft storage
About 80% of the homes in the area around Queensbury went up between 1919 and 1939, and about 8% since 2000, on the Valuation Office Agency’s council tax figures for 2025. Knowing roughly when a home was built helps, because walls and fixings change from one era to the next. Queensbury is partly covered by a conservation area, going by Historic England’s data. Planning controls in conservation areas are mainly concerned with the outside of buildings, so fitting furniture inside a house doesn’t normally need permission. The council can confirm if you’re not sure. The ULEZ, run by TfL, takes in all of London, so Harrow is inside it. That includes the vans that bring and fit furniture in Queensbury. We plan parking and access with you at the design visit.
For an older house near All Saints Church, a dormer in a converted loft can hold shelves or a small desk. The wider area includes historic houses such as Headstone Manor, about 2.7 miles west. If your own home is a period one, the knee walls of a converted loft can take drawers as well as cupboards. Close to Roe Green Park? Eaves cupboards can be designed to hold outdoor kit, from walking boots to picnic things.
Queensbury is about 3 miles south-west of Harrow, in the London Borough of Harrow. Anywhere in Queensbury, it works the same way: a design visit, a quote in writing, furniture made in our workshop and fitting in your home. We list Queensbury among 20 places we cover in Harrow.
We make loft storage across HA3, NW9 and HA7 for loft storage. We cover homes on streets such as Glebe Lane, Kenton Road and Turner Road, whether you want loft storage or another piece made for the room. Queensbury is near the A4006 and A4140, so if your home is on a main road, mention it when you get in touch. Neighbouring places we cover for loft storage include Kingsbury (1 mile south-east), Preston (1 mile south), Colindale (2 miles east), West Hendon (2 miles east) and The Hyde (2 miles east). We also make loft storage in nearby places like Harrow (3 miles south-west), Stanmore (2 miles north), Hatch End (4 miles west), Harrow Weald (2 miles west), Wealdstone (2 miles west) and Greenhill (2 miles west).
What’s near Queensbury
Around Queensbury, we cover homes near Whitchurch Junior School, The New Moon pub and Canons High School, among other places. The closest station to Queensbury is Kenton station, about 1.3 miles south-west. A little further out are Broadwalk Centre (1.6 miles north-east) and Edgware Community Hospital (1.3 miles north-east). Green spaces nearby include Masons Field.
Loft storage for homes in Queensbury
Each eaves cupboard is made at our workshop, using moisture-resistant MDF and birch plywood. Birch plywood is strong and holds screws well, which suits drawer boxes and carcasses, and MDF gives the doors and panels a smooth surface for paint. It’s then spray-painted or hand-painted and fitted in your home in Queensbury. We make eaves cupboards from moisture-resistant MDF and birch plywood, spray-painted or hand-painted, and the usual reasons to get in touch are furniture that can’t get up to the loft and boxes piled on loft boards.
Around Queensbury, interwar houses or semi-detached and detached homes make up a good part of the housing. In a typical 1930s house, storage tends to hide in the bay, under the stairs and in the box room. Any meters or fuse boards that need to stay reachable are designed around.
Where other trades are needed, for instance an electrician to move a socket, we point that out. The quote itself covers our work, from the design to the materials and finish.
- Location
- Queensbury (HA3, NW9, HA7)
- Borough
- Harrow
- Price
- Quoted for your room
- First step
- A design visit: we measure and talk it through
- Making
- In our workshop, then fitted in your home
- Boards and paint
- MDF and birch plywood, painted
- Fitting days
- Weekdays, and Saturdays by prior arrangement
- Enquiries
- Our contact form
- Updated
- 27 October 2026
Common questions about loft storage
I live near Kenton station. Is that in your area?
Yes. We cover all of Harrow and the rest of London. To get started, you can use our contact form with some details about the room.
Will a conservation area stop me having loft storage fitted in Queensbury?
Normally not: conservation area rules mainly cover the outside of buildings, and fitted furniture inside a house doesn’t normally need planning permission. Listed buildings are different, as works inside that affect their character can need listed building consent from the council. The council’s planning or conservation team can tell you if in doubt.
Will the storage fit up my loft stairs?
Measuring the route is part of the design visit. We size every section for the tightest turn, and then assembled in the loft.
Should I send photos?
Yes. They give us a feel for the space before we visit. Show anything the furniture has to work around, such as radiators or sockets.
Does someone need to be home during the fitting?
We need access, so someone has to let us in. After that, you do not need to stay in the room, but it helps to be around at the end.
Do you carry out loft conversions?
No, we build storage in lofts that are already converted or boarded. Loft conversions are building work, with Building Regulations to follow. Once your loft is converted, we can design the storage.
When you need someone else
As carpenters, we leave some work to other trades. These are worth knowing before you plan:
- Insulation or ventilation work behind the eaves
- Approval for structural changes
- Converting the loft itself, which isn’t our work
Not sure whether your space suits loft storage? You can get in touch through our contact form and we’ll tell you. How a job runs, step by step.
What goes into it
- Birch plywood
- Moisture-resistant MDF
- Eaves doors and drawers
- Hand-painted finish
- Sloped wardrobe tops
- Spray-painted finish
Fitting day, step by step
Once the main sections are fixed in place, we hang any doors and fit any drawers or lids. Each one is adjusted until the gaps are even and it closes cleanly, and then we check it all again. The time the fitting takes depends on how much storage you want in the loft, and the fitting days are agreed in your quote. A front path or side gate can make the carry from the van simpler. We measure the path, any steps and the front door as part of the route. Floors, stairs and doorways are protected on the way in, and the sections are assembled in place.
- First we hear about the loft room and what you’d like to store, including the eaves and any dormer.
- We measure the eaves, the slopes and the stairs up to the loft, as everything has to get up there.
- We agree the cupboards, drawers and wardrobes, and send a quote in writing, with the finish set out.
- The storage is made in our workshop, in sections sized for the stairs. It’s made from moisture-resistant MDF and birch plywood.
- We carry it up, fit it and check every door and drawer with you. Any hand painting is done in the loft.
Before fitting day
- If you live in a block, book the lift and tell the building manager
- Tell us about any meters, fuse boards or boilers in the area
- Move furniture and belongings away from the wall
How to get a quote
There’s no price list: each design is priced in writing after we’ve seen the space. Each room is different, so we quote after seeing it, when we’ve measured up and talked through the design. For a quote, use our contact form.
Advice
Flat-pack or bespoke?
It’s worth being honest about cost: flat-pack is usually cheaper to buy. Bespoke earns its place where the room is awkward, space is tight or you want the furniture to look part of the house.
The real difference is in the fit: edges scribed to the wall, a level base on a sloping floor and a neat line where the furniture meets the ceiling. In an older room, standard units rarely manage that.
What affects the price in Queensbury
The price for your room depends on:
- How big the furniture is
- What goes inside: rails, shelves, drawers and dividers
- How easy it is to get the furniture into the room
- Spray painting or hand painting
There’s no price list, because every piece is designed for one room. Instead, we measure, go through the design and then quote in writing, naming the materials and finish. To start, get in touch through our contact form.
Before the design visit
There is no need for exact sizes or plans. It’s enough to send:
- Rough measurements, even if they’re only to the nearest few centimetres
- What the furniture needs to hold
- Whether it’s a house or a flat, and if there are stairs or a lift
- Anything fixed to the wall that the furniture needs to work around
For a quote for loft storage in Queensbury, tell us about the room on our contact form. Let us know which room it is and roughly what you have in mind, with sizes if you have them. We will arrange a design visit, then send a quote in writing.
Neighbourhoods near Queensbury
More for homes in Queensbury
Flats, conversions and lettings
For a rented home, access for the design visit and fitting day has to be agreed with the tenants. A letting agent can arrange this on a landlord’s behalf, and the written quote can go to whoever needs it.
For flats on red routes or busy main roads, getting the furniture from the van to the door needs planning. TfL runs the red routes, and the stopping rules are strict, so tell us about it at the design visit.