Example photo by Kirsten Miles on Unsplash, not our project
Bexley · London
Loft storage in Sidcup, Bexley
For homes in Sidcup, we make loft storage from moisture-resistant MDF and birch plywood. The finish is spray painted or hand painted, in a colour agreed with you.
- Wasted space behind the knee walls
- A dormer that is not being used
- Furniture that can’t get up to the loft
Ask about loft storage in Sidcup
Questions from Sidcup
Do I need permission for fitted furniture in a conservation area?
Typically not: conservation area rules mainly cover the outside of buildings, and fitted furniture inside a house doesn’t normally need planning permission. If your home is listed, works inside that affect its character can require listed building consent, so check with the council first. If you’re unsure, the council can confirm.
I live near Sidcup station. Is that in your area?
Yes. We cover all of Bexley and the rest of London. To get started, you can get in touch through our contact form with a few details about the room, and let us know about parking and access at the same time.
Will the storage fit up my loft stairs?
We measure the stairs and landings as well as the loft room. We size every section for the tightest turn, and the pieces are put together in the room.
What materials do you use for loft storage?
The storage is made from moisture-resistant MDF and birch plywood. Birch plywood gives strength to the carcasses and drawers, and MDF takes paint well for the doors and panels. The finish is spray-painted or hand-painted.
Do you do the loft conversion too?
No. Our work is storage in loft rooms that are already converted, or in boarded lofts. Loft conversions are building work, with Building Regulations to follow. When the room is finished, we can plan the storage.
Can a wardrobe follow a sloping ceiling?
Yes. Bespoke wardrobes are made to the angle of the ceiling. The tall end takes hanging space, and the low end can hold shelves or drawers. It’s cut to fit the ceiling and walls exactly.
Loft storage for homes in Sidcup
Loft stairs are often narrow and steep, with tight turns. We measure the route as well as the room, so every section built in our workshop fits up the stairs. It is part of the job for any loft room in Sidcup. We make eaves cupboards from moisture-resistant MDF and birch plywood, spray-painted or hand-painted, and the usual reasons to get in touch are a loft room that doubles as an office or guest room and nowhere to store bags and boxes.
A good share of the homes around Sidcup were built between 1945 and the early 1970s. Post-war homes typically have squarer rooms and fewer nooks than period ones, which means eaves cupboards can add storage that was never built in. Walls may be concrete, block or brick, so fixings are chosen for the wall.
The written quote is your record of the job. It sets out the eaves cupboard designed for your room, what it is made from and how it is finished.
- Where
- Sidcup (DA14, DA15, SE9, DA5)
- Area
- Bexley
- Cost
- Quoted for your room
- To begin
- A design visit: we measure and talk it through
- Made
- In our workshop, then fitted in your home
- Boards and paint
- MDF and birch plywood, painted
- When we fit
- Weekdays; Saturdays on request
- Contact
- Send us a message
- Page updated
- 27 October 2026
Fitting day, step by step
Fitting day follows a set order: we protect the floors, bring the sections in, set them level, scribe them to the walls, fix them and finish them. At the end, we tidy up and go over the work with you. The time the fitting takes depends on how much storage you want in the loft, and your quote sets out the fitting days. Walls in post-war homes can be concrete or blockwork, so fixings are chosen for the wall on fitting day. We protect floors and doorways as the furniture comes in.
- You contact us about storage in your converted loft.
- We visit to measure the loft and the way up, including the top flight and any tight turn. Let us know about parking too, as a van often needs a permit or a paid bay.
- A quote in writing follows, covering the design, materials and finish.
- We build the storage in our workshop from moisture-resistant MDF and birch plywood, sized to get up to the loft.
- The sections go up the stairs, are assembled under the eaves and set level.
Before fitting day
- Mention any parking restrictions on your street
- Book any lift and let the concierge or building manager know
- Let us know where the boiler and meters are
Ask for a quote
You do not need exact measurements to get started. Everything is measured properly when we visit. To get started, drop us a line using the contact form and let us know about the room. The written quote follows the visit.
Related advice
What we don’t do
Damp treatment and building work are for other specialists, so these points are worth knowing:
- Altering the structure of the loft
- Insulation or ventilation work behind the eaves
- Electrical work in the loft
If you’re not sure what’s possible in your room, you can get in touch through our contact form and we’ll give you a straight answer. Our process from visit to fitting.
Boards, parts and finishes
- Spray-painted finish
- Moisture-resistant MDF
- Eaves doors and drawers
- Birch plywood
- Sloped wardrobe tops
- Hand-painted finish
Do you need loft storage in Sidcup?
Some people want to make more of a dormer. Built-in furniture in a dormer puts it to work. It uses space that’s otherwise empty.
Typical reasons people contact us include:
- An empty dormer that could hold shelves
- Boxes piled on loft boards
- Furniture that cannot get up to the loft
- Seasonal things cluttering the loft room
Danson House, about 1.7 miles north, is one of the historic houses in the wider area. If your own home is a period one, the knee walls of a converted loft can take drawers as well as cupboards.
Choosing a carpenter
- Can you see real work of theirs?
- Will the doors close with even gaps?
- Have they thought about parking near you?
- Is it spray painted or hand painted?
Could you do it yourself?
Cost matters, and it is fair to say so: off-the-shelf furniture usually costs less up front. Bespoke makes more sense where the room is tricky, the space is valuable or you want the furniture to look built in.
Standard units come in set widths and heights, so there is often a strip of wasted space at the side or above. Fitted furniture is made to the room’s measurements, so it can use the full height and width.
Practical tips
A few practical points help before and after fitting day. Here are some things worth bearing in mind:
- Think about hanging space for a loft bedroom
- Consider drawers for the deep, low spaces
- Think about matching the woodwork or the walls
- Clear the knee-wall spaces before the design visit if you can
Once the fitting is done, the storage is ready to use. Paint needs time to cure fully, so treat the new finish gently at first. Keep tape and strong cleaners away from it while it settles.
Loft rooms can be warm in summer and cool in winter. Keep the room ventilated. It helps the storage stay in good condition.
Loft storage in Sidcup: local notes
In the streets around Sidcup, the largest groups of homes date from between 1945 and 1972 (about 30%) and between 1919 and 1939 (about 20%), going by the Valuation Office Agency’s 2025 council tax figures. We take that into account during the design visit, since older and newer walls take different fixings. The centre of Sidcup is within about a quarter of a mile of the Halfway Street Conservation Area. Being in a conservation area mainly affects changes to the outside of a building, and fitted furniture inside a house does not normally need planning permission. If in doubt, the council’s planning team can confirm. Each London borough runs its own parking controls, and Bexley is no exception. Depending on your street in Sidcup, a visitor permit, a paid bay or a council bay suspension may be needed. Parking near your home is worth mentioning at the measuring visit.
If you live in a flat close to Sidcup station, eaves cupboards are made in sections sized for the stairs, landings and lift, so measuring the route matters as much as measuring the room. If you live in a period home close to Holy Trinity Church, the knee walls of a converted loft can take drawers as well as cupboards.
Sidcup is part of the London Borough of Bexley. We design and make loft storage for homes in Sidcup. Across Bexley, we cover Sidcup, along with the rest of the borough.
Postcode districts we cover here for loft storage: DA14, DA15, SE9 and DA5. We cover homes on streets like Station Road, High Street and Jubilee Way, along with the roads around them, whether you want loft storage or another piece made for the room. The A211 and A2001 run close to Sidcup, so if your home is on a main road, mention it when you get in touch. Other places close to Sidcup include Albany Park (1 mile south), Blendon (1 mile north-east), Foots Cray (1 mile south-east), Bexley (2 miles north-east) and North Cray (2 miles east). We also make loft storage in nearby places such as Welling (2 miles north), Erith (4 miles north-east), Belvedere (4 miles north-east), Northumberland Heath (4 miles north-east), Lessness Heath (4 miles north-east) and Bexleyheath (2 miles north-east). Sidcup is among the bigger places we cover in Bexley.
Around Sidcup
Around Sidcup, we cover homes near The Alma pub and Chislehurst and Sidcup Grammar School and the streets around them. Sidcup has its own railway station: Sidcup station. Other landmarks nearby include Queen Mary's Hospital (1 mile south) and Metropolitan Police Museum (a few minutes’ walk north-west).