Example photo by Kirsten Miles on Unsplash, not our project
Bexley · London
Loft Storage in Lessness Heath
Eaves cupboards, drawers and wardrobes in converted lofts, designed for your room in Lessness Heath. After a design visit and a written quote, it is made at our workshop and fitted in your home.
- Standard furniture that will not go up the loft stairs
- Needing storage in a loft office
- A converted loft with no fitted furniture
Need loft storage in Lessness Heath?
How we make loft storage for Lessness Heath
Getting furniture up to a loft room is part of the planning. At the design visit, we measure the stairs and landings as well as the loft, so the sections we make in our workshop can be carried up. It is a step that matters for any loft in Lessness Heath. We make eaves cupboards from moisture-resistant MDF and birch plywood, finished by spray or by hand, and the usual reasons to get in touch are a boarded loft that’s hard to keep organised and space under the eaves going to waste.
A deep space is only useful if you can reach the back of it, so the design uses drawers, lids or shelves to bring things within reach. For a home in Lessness Heath, what works depends on how deep and how tall the space is. Services like meters and boilers stay reachable.
We write quotes in plain English. You will see what will be made, the boards used and the finish, all taken from the design visit.
- Place
- Lessness Heath (DA17, DA8, DA7)
- Area
- Bexley
- Cost
- Quoted for your room
- To begin
- We visit, measure, then quote
- Where it is made
- Made in our workshop and fitted on site
- Materials and finish
- MDF and birch plywood, painted
- Working days
- Weekdays; Saturdays on request
- Enquiries
- The contact form
- Updated
- 27 October 2026
What it costs
What you pay depends on:
- What goes inside: rails, shelves, drawers and dividers
- The width and height of the space
- How square the room is
- The number of doors and drawers
Every piece is quoted for your room after the design visit. Size, the number of doors and drawers and the internal fittings make the biggest difference to the price.
Getting in touch
Before the design visit, it helps us to know about:
- Any ideas or images you have saved
- What kind of home it is, and which floor the room is on
- How you want to use the space
- Approximate measurements of the space
Rough sizes are fine at the start. Everything is measured properly when we visit. To arrange it, use our contact form. You receive a written quote after the visit.
Neighbourhoods near Lessness Heath
Also in Lessness Heath
Fitted storage in Lessness Heath
Homes built before 1919 make up about 26% of the housing in the streets around Lessness Heath, with about 22% built between 1945 and 1972, in the VOA’s 2025 council tax stock figures. We take that into account at the design visit, since older and newer walls take different fixings. The centre of Lessness Heath is within about a quarter of a mile of the Erith Road Conservation Area. Fitted furniture inside a house doesn’t normally need planning permission in a conservation area, as the controls are largely about how buildings look from outside. The council can confirm if you’re not sure. Each London borough runs its own parking controls, and Bexley is no exception. Where a street in Lessness Heath is controlled, a van may need a visitor permit, a paid bay or a bay suspension from the council. We ask about parking during the design visit, so the day can be planned around it.
For a family home near Lessness Heath Primary School, eaves cupboards can give school bags, shoes and sports kit a proper home. If you live in a period home close to Parish Church of All Saints, the low eaves and slopes of a converted loft are worth using. Red House, about 2.3 miles south-west, is one of the historic houses in the wider area. If your own home is a period one, the low eaves and slopes of a converted loft are worth using.
Lessness Heath is in the London Borough of Bexley, about 4 miles south-west of Sidcup. We work across all London boroughs and the City of London, and Lessness Heath is part of that. Lessness Heath is one of the places in Bexley where we make loft storage.
Postcode districts we cover here for loft storage: DA17, DA8 and DA7. Our area takes in homes on streets like Cray Road, Clive Road and Erith Road, whether you want loft storage or another piece made for the room. Neighbouring places we cover for loft storage include Belvedere (1 mile east), Erith (1 mile south-east), Northumberland Heath (1 mile south-east), West Heath (1 mile south-west) and Bexley Riverside (1 mile south-east). Elsewhere in Bexley, we also cover Sidcup (4 miles south-west), Welling (3 miles south-west), Bexley (3 miles south), Bexleyheath (2 miles south), Albany Park (5 miles south-west) and Thamesmead (2 miles north-west).
Landmarks near Lessness Heath
We fit furniture in homes around Trinity Church of England School, Priory Club pub and Trinity School. For rail, the closest station is Belvedere station, roughly 0.5 miles north of the centre. Well-known places in the area include Erith and District Hospital (0.9 miles south-east) and Erith Museum (1.2 miles east). Green spaces nearby include Crossness Nature Reserve.
Materials and finishes
Doors and drawer fronts
What you see of the storage is mostly its fronts. We make them plain or panelled, with handles to match. They’re cut to follow the angle of the ceiling.
Birch plywood
Birch plywood is made in layers, which makes it strong and stable. We use it for carcasses, shelves and drawer boxes, with the edge either shown or painted.
What happens on fitting day
Once the main sections are fixed in place, we hang any doors and fit any drawers or lids. Each one is adjusted until the gaps are even and it closes cleanly, and then we check it all again. How long the fitting takes depends on the length of the eaves and the design, and your quote sets out the fitting days. On fitting day, each piece is fitted to the room’s own walls, with scribing where they wander and packing where floors dip. Spray-painted pieces arrive finished; hand-painted ones can be finished on site.
- You get in touch with some details about the loft room.
- We visit to measure and look at what’s behind the knee walls, and go through the design with you.
- Your quote sets out the design, the materials and the finish. You can ask us about any of it.
- Your storage is made in our workshop, shaped to the loft, from moisture-resistant MDF and birch plywood.
- The storage is fitted and set level, ready to fill.
Preparing the room
- Get any new sockets or wiring done by your electrician before fitting day
- Take down pictures, mirrors and shelves from the wall
- Tell us about parking near your home
Ask for a quote
We quote each job for the room it’s going into, after the design visit. Because every room is different, the quote comes after the design visit, when we have measured up and talked through the design. To arrange a visit, send us a few details through our contact form.
Related advice
Why bespoke in Lessness Heath?
Off-the-shelf furniture is made for straight walls and full-height ceilings. In a loft room, standard pieces leave awkward gaps under the slope. Storage made for the loft follows its shape. It is a bigger investment, and the gain is the space it uses. Standard units come with shelves and rails where the maker put them, rather than where you need them. With fitted furniture, the inside is planned around what you keep.
The inside of the furniture affects the price as well: drawers take more making than shelves, and each rail, divider or pull-out adds to the work. At the design visit, we work out what you need inside, then set it out in the quote.
Why us?
- Made in moisture-resistant MDF and birch plywood
- Saturday work by prior arrangement
- Edges scribed to follow your walls
- A design visit, then a written quote
Read bespoke vs off-the-shelf or what a quote should include.
Common questions about loft storage
Is Lessness Heath in the area you cover for loft storage?
Yes. We cover all of Bexley and the rest of London, and Lessness Heath is part of that. We start with a design visit to measure the room and talk through what you need, followed by a quote.
Will parking be an issue for fitting furniture in Lessness Heath?
It can be, depending on whether your street is in a controlled parking zone. A van may need a visitor permit, a paid bay or a parking bay suspension, which the council arranges, often with notice. Let us know what parking is near you at the measuring visit.
Is the furniture spray painted or hand painted?
There are two choices: a spray finish from the workshop, which is smooth and even, or hand painting, which can be done in your home. Your quote sets out which you’ve chosen.
What do eaves cupboards cost?
We quote each job for the room it’s going into, after the design visit. It depends on how much storage you want, the shape of the room and the finish. For a quote, use our contact form to arrange a design visit.
Do I need permission in a conservation area?
Usually not. Inside a house, fitted furniture does not normally need planning permission. Listed buildings may need listed building consent for works that affect their character, so check with the council first.
What do you do at the measuring visit?
We take full measurements, look at the walls and floors and work through the design together. Access and parking are worth talking about too.
Bespoke or off-the-shelf?
If you’re handy, a simple shelf or a standard wardrobe in a square room is a reasonable DIY job. It gets harder with sloping ceilings, out-of-level floors and lath-and-plaster walls.
Cost matters, and it is fair to say so: off-the-shelf furniture typically costs less up front. Bespoke earns its place where the room is tricky, space is tight or you want the furniture to look part of the house.