Example photo by Kirsten Miles on Unsplash, not our project
Kensington and Chelsea · London
Loft storage in World's End, Kensington and Chelsea
Thinking about loft storage in World's End? It starts with a design visit to measure and talk through ideas, then a quote in writing.
- A loft room with too many jobs
- A new loft conversion that needs storage
- A dormer that isn’t being used
Loft storage in World's End
About our loft storage in World's End
Our work is in loft rooms that are already converted, or lofts that are boarded. The conversion itself is not our work, and conversions come under Building Regulations. Once the room is finished, we can design storage to suit it. If you have a converted loft in World's End, the design visit is the first step. Typical reasons to get in touch are a sloping ceiling with no room for a wardrobe and a dormer that isn’t being used, and the answer is made in our workshop from moisture-resistant MDF and birch plywood, finished by spray or by hand.
A solid brick outside wall in an older house can be cold and sometimes damp, so a gap and ventilation behind fitted storage help avoid condensation. A large share of the homes around World's End date from then. Any damp is dealt with before storage goes in.
If the job needs another trade, such as an electrician or a plumber, we will tell you, so it can be arranged before fitting day. Our quote covers the carpentry: the design, the materials and the finish.
- Where
- World's End (SW10, SW6, SW3)
- Borough
- Kensington and Chelsea
- Price
- Quoted for your room
- To begin
- We visit, measure, then quote
- Where it’s made
- In our workshop, then fitted in your home
- Materials and finish
- Painted MDF and birch ply
- Fitting days
- Monday to Friday; Saturdays by arrangement
- Contact
- Send us a message
- Updated
- 27 October 2026

Bespoke or off-the-shelf?
It is worth being honest about cost: off-the-shelf furniture typically costs less up front. Bespoke makes more sense where the room is tricky, the space is valuable or you want the furniture to look built in.
Off-the-shelf cupboards come in fixed sizes, so there’s often a strip of wasted space at the side or above. Fitted furniture is made to the room’s measurements, so it can use the full height and width.
Neighbourhoods near World's End
What else we make in World's End
Making use of tricky spaces in World's End
About 59% of the homes in the streets around World's End went up before 1919, and about 17% since 2000, based on the Valuation Office Agency’s 2025 council tax data. Knowing roughly when a home was built helps, because walls and fixings change from one era to the next. The National Heritage List has 118 entries within half a mile of the centre of World's End. Older homes nearby may have original joinery, shutters or panelling worth keeping, and the furniture can be designed around them rather than over them. The ULEZ (Ultra Low Emission Zone) now covers the whole of London, Kensington and Chelsea included. That includes the vans that bring and fit furniture in World's End. Parking and access are planned during the design visit.
If you live in a period home close to St John's Church Centre, eaves cupboards in a converted loft are scribed to slopes that are rarely even. Carlyle's House, about 0.5 miles east, is one of the historic houses in the wider area. If your own home is a period one, sloping ceilings in a loft room suit wardrobes cut to the angle. Near listed buildings like Chelsea Old Church (all Saints), less than half a mile east of the centre of World's End, older homes may keep original joinery that eaves cupboards can be designed around. For a listed home, fixing into original features can need listed building consent.
World's End is about 2 miles north-west of Kensington, within the Royal Borough of Kensington and Chelsea. Design visits and fitting in World's End can be on a Saturday, by prior arrangement. Our Kensington and Chelsea coverage includes World's End, along with the rest of the borough.
Design visits and fitting in SW10, SW6 and SW3 work the same way as everywhere else we cover. Whether you live on a street such as Ann Lane, Lots Road and Avalon Road or on one nearby, we can visit to measure up for loft storage. Neighbouring places we cover for loft storage include Little Chelsea (1 mile north), Chelsea Harbour (1 mile south), Walham Green (1 mile south-west), Sands End (1 mile south) and South Kensington (1 mile north). We also make loft storage in nearby places such as Kensington (2 miles north-west), Notting Hill (2 miles north-west), Notting Dale (3 miles north-west), Holland Park (2 miles north-west), Bayswater (2 miles north) and Kensal Town (3 miles north-west).
What’s near World's End
The streets we cover here include those near Chelsea Academy, The World's End pub and English National Ballet School, among other places. The nearest railway station is Imperial Wharf station, about 0.5 miles south of the centre. Well-known places in the area include Kensington Arcade (1.4 miles north) and Chelsea Stadium Tour And Museum (less than half a mile west). Green spaces nearby include Battersea Park Lake.
Materials and finishes
Spray-painted finish
Spray painting gives the storage a very even surface. We apply it in our workshop, so treat it gently while it cures fully.
Birch plywood
Its layered build gives birch plywood its strength. It goes into the carcasses, the shelves and the drawers, with the edge either shown or painted.
Honest limits
Our work is the furniture itself: designing it, making it in our workshop and fitting it. In practice, that means:
- Loft conversions, which we do not carry out
- Insulation or ventilation work behind the eaves
- Structural changes, like cutting into rafters or joists
Not sure whether your space suits loft storage? You can use our contact form and we’ll tell you. How it works.
What goes into it
- Birch plywood
- Spray-painted finish
- Hand-painted finish
- Moisture-resistant MDF
- Eaves doors and drawers
- Sloped wardrobe tops
Common questions about loft storage
Do you make loft storage for homes in World's End?
Yes, World's End is within the area we cover, which takes in all of Kensington and Chelsea and the rest of London. The first step is a design visit, where we measure and discuss the design, and then we send a quote.
Do I need permission for fitted furniture in a conservation area?
Not normally. Conservation area controls are largely about how buildings look from outside, so fitted furniture inside a house does not normally need planning permission. If your home is listed, internal works that affect its character can need listed building consent, so check with the council first. The council’s planning or conservation team can tell you if in doubt.
What happens when you come to measure?
We measure the space and discuss the design, materials and finish. We look at the walls, floors and anything the furniture has to work around, and the written quote comes afterwards.
Can the fitting be on a Saturday?
Yes, by prior arrangement. If a Saturday works better for you, say so when you get in touch.
Will eaves storage block the ventilation?
It shouldn’t, if it’s designed properly. The storage is planned around the insulation and ventilation behind the knee wall. For worries about existing insulation or vents, ask the people who did the conversion.
Who chooses the colour?
The choice is yours, and we agree it with you before the furniture is finished. Spray and hand-painted finishes both use the colour you have chosen.
How fitting works for loft storage
You will not need to do much on the day. Someone needs to let us in, and the room should already be cleared, as agreed at the measuring visit. After that, it’s over to us: the floors are covered, the sections come in and the fitting begins. How long fitting takes depends on how much storage you want in the loft, and your quote sets out the fitting days. If your hall still has its original tiles or boards, they’re covered before any carrying starts. Drilling into lath and plaster is done with care, so the plaster around stays sound. Any decorating around the new pieces is for your decorator.
- It starts with some details from you.
- We come to measure and go through the design and finish.
- Your written quote sets out the design, materials and finish.
- We make the cupboards and drawers in our workshop from moisture-resistant MDF and birch plywood.
- We fit it in the loft and check each door and drawer with you.
- Go easy on new paintwork while it cures; hand-painted surfaces are easy to touch up later.
Preparing the room
- Move furniture and belongings away from the wall
- Have your electrician move any sockets or switches beforehand
- Move anything in the hall or on the stairs out of the way
Getting a quote
The design visit is where every quote starts. We measure the room properly, check how the walls and floors run and discuss the design with you. A written quote follows the visit. To book one, drop us a line using the contact form.
Advice
Why bespoke in World's End?
A standalone wardrobe can go with you when you move. Fitted storage stays with the house, and it uses the slopes in a way a standalone piece can’t. Which suits you depends on your plans. Ready-made tall pieces have to be fixed to the wall for safety, and older walls of brick or lath and plaster make that harder than it looks. With fitted pieces, the fixings are planned for the wall from the start.
How it’s painted is part of the price: spray painting happens in the workshop, and hand painting can be done in your home. The written quote reflects your choice, along with the size and fittings.
What you get with us
- Moisture-resistant MDF and birch plywood
- We visit, measure and talk through the design before we quote
- Saturday visits and fitting by arrangement
- Made for your room, not a standard size
Read our comparison of bespoke and off-the-shelf or what a quote should include.