Example photo by Franco Debartolo on Unsplash, not our project
Bromley · London
Beckenham TV and Media Units
Built-in TV walls and media cabinets, for homes in Beckenham. We make each piece in our workshop and fit it in your home, with a spray or hand-painted finish.
- Wasted space around the screen
- Boxes and consoles on the floor
- Boxes with no ventilation
TV and media units for your home in Beckenham
Bespoke or off-the-shelf?
A confident DIYer can manage simple shelves or a standard wardrobe in a square room. It gets harder with sloping ceilings, out-of-level floors and lath-and-plaster walls, where scribing and fixings that suit the wall are important.
Bespoke work comes into its own in rooms that are not square. Older London rooms tend to have leaning walls, sloping floors and alcoves of different widths.
TV and media units for homes in Beckenham
TV units are made from moisture-resistant MDF and birch plywood. The finish is spray painted in the workshop or hand painted, in a colour agreed with you. We fit across Bromley and the rest of London. Most enquiries start with a screen at the wrong height and equipment with nowhere proper to go; the furniture is made from moisture-resistant MDF and birch plywood, spray-painted or hand-painted.
You might live in a Victorian terrace, a 1930s semi, a mansion block or a recent flat, and your home in Beckenham could be any one of them. Each brings different walls and floors, so the design of TV and media units starts with a look at what you have. Bowed walls call for scribing, and plasterboard for the right fixings.
Materials are named in the quote: moisture-resistant MDF, birch plywood or both, depending on the design. It also says how the furniture will be finished: spray painted or hand painted.
- Place
- Beckenham (BR3, SE26, BR4, SE20)
- Area
- Bromley
- Prices
- Quoted for your room
- To begin
- We visit, measure, then quote
- Making
- Made in our workshop and fitted on site
- Materials and finish
- MDF and plywood, painted to order
- Fitting days
- Weekdays, and Saturdays by arrangement
- Get in touch
- Send us a message
- Last updated
- 27 October 2026
Questions we are often asked
Is parking a problem for fitting in Beckenham?
It can be, depending on whether your street is in a controlled parking zone. Depending on the street, a visitor permit, a paid bay or a bay suspension through the council may be needed, and suspensions often need notice. It’s useful to tell us about parking at the design visit.
My home in Beckenham is a flat. How do you get the furniture in?
We measure the route in as well as the room: the stairs, landings, lift and doors. The furniture is made in sections that fit the stairs and lift, and put together in the room. It helps to check any building rules and your lease before fitting day.
How do I get a quote?
The first step is to use our contact form. After that, we arrange a design visit and follow it with a written quote.
How do you stop equipment overheating in a TV unit?
Equipment gives off heat, so it needs air around it. We design open backs, gaps or vents where it sits, rather than sealing it in a cupboard. Once it’s in, do not block the gaps.
How long are you in the house for fitting?
The time on site depends on the size of the unit and the cable routes planned into it, and your quote sets out the fitting days. We’ll explain what fitting day involves before we start.
Does the unit work if the TV is on a bracket?
The unit can be planned either way. If the TV is wall-mounted, panels and shelves are arranged around the bracket and cables.
What it costs
When we put a quote together, we consider:
- Hanging rails, shelves, drawers and other fittings inside
- Tricky walls, sloping ceilings and uneven floors
- Where a van can park, like a permit bay or a bay suspension
- Stairs, lifts and the route to the room
Every piece is quoted for your room after the design visit. Size, the number of doors and drawers and the internal fittings make the biggest difference to the price.
Helping us understand the room
To help us picture the room, please include:
- Anything in the way, like radiators, sockets, switches, a boiler or meters
- How you want to use the space
- Your postcode and the borough
- Any ideas or images you have saved
It helps to see the room before we come. A few pictures showing the walls, the corners and where the ceiling meets them give us a good feel for the space, along with rough measurements. To share them, fill in our short enquiry form, and we will suggest a time for a design visit.
Practical tips
A little care keeps the finish looking good. Here are our suggestions:
- Note the size of each box and speaker
- Mention parking and stairs when we visit
- Plan any new sockets with your electrician before fitting
- Look at what the equipment makers say about airflow
Use the access panels and cable routes when you add or change leads rather than drilling new holes. It keeps the unit tidy.
Ask your electrician about new sockets rather than running extension leads through the unit, and don’t daisy-chain adaptors.
The problems TV and media units solve
Open-plan living is another reason. A built-in unit gives that wall order and adds storage for the rest of the room.
Here are some of the needs we are asked about most:
- Cables trailing across the wall
- Clutter around the TV
- Bought furniture that does not suit the room
- Speakers muffled behind doors
Close to Beckenham Place Park? A room that looks out on trees deserves a design that leaves the window alone.
Choosing a carpenter
- Will they visit to measure before quoting?
- Which parts of the job need an electrician or a plumber
- Will the quote be in writing?
- How the doors are hung and adjusted
Living-room carpentry in Beckenham: local notes
In the area around Beckenham, the largest groups of homes date from between 1945 and 1972 (about 25%) and between 1973 and 1999 (about 25%), going by the Valuation Office Agency’s 2025 council tax figures. We take that into account during the design visit, since older and newer walls take different fixings. Entries on the National Heritage List near the centre of Beckenham include Parish Church of St George (Grade II*), less than half a mile north-east, and The George Inn (Grade II), less than half a mile south. Listing covers the inside of a building as well as the outside, so works that affect a listed home’s character, like removing original joinery, can need listed building consent. Ask the council’s conservation officer before anything is fixed. About 50% of households around Beckenham live in purpose-built flats, well above the figure for Bromley as a whole, about 23%, going by Census 2021 figures from the ONS. That puts the stairs, lifts and doors on the route in at the centre of the plan.
For a flat near Beckenham Junction station, each piece is planned so it can be carried up and joined together in the room. If your children go to Harris Primary Academy Beckenham Green or a school nearby, shelving with deep cupboards below keeps books, games and school things in one place.
Beckenham is about 6 miles east of Orpington, part of the London Borough of Bromley. We design and make TV and media units for homes in Beckenham and across Bromley. Beckenham is one of the places in Bromley where we make TV and media units.
Here we cover the BR3, SE26, BR4 and SE20 postcode area for TV and media units. We cover homes on streets like High Street, The Drive and Stanmore Terrace, whether you want TV and media units or another piece made for the room. Beckenham sits close to the B230 and B251. We also cover Penge (1 mile west), Bell Green (2 miles north), Bellingham (2 miles north), Southend (2 miles north) and Sydenham (2 miles north-west). Elsewhere in Bromley, we also cover Orpington (6 miles east), Bromley (2 miles east), St Mary Cray (6 miles east), Chislehurst (4 miles east), Crystal Palace (2 miles north-west) and Biggin Hill (7 miles south). Beckenham is one of the larger places we cover in Bromley.
Around Beckenham
In Beckenham, that includes homes near The George Inn and Harris Academy Beckenham and the streets around them. Beckenham has its own railway station: Beckenham Junction station. Other landmarks nearby include Beckenham Beacon (less than half a mile south-west) and The Glades (1.9 miles east).
Nearby places to Beckenham
Other services in Beckenham
What happens on fitting day
With the carcasses fixed and level, we hang any doors and fit any drawers or lids. We adjust each one so the gaps line up and it closes cleanly. How long the fitting takes depends on the length of the TV wall and what it needs to hold, and we confirm the fitting days in your quote. Clearing the room and the way in beforehand makes the day easier, including pictures on nearby walls. We cover floors and doorways first. Then the sections come in and are joined in place.
- To begin, get in touch through our contact form; a brief note on the TV wall and everything that plugs into it is plenty.
- At the design visit we measure the wall and plan cable routes and ventilation, as set-top boxes, consoles and amplifiers need air. If you need new sockets, your electrician should do that before fitting.
- A written quote follows for the unit.
- The unit is made in our workshop from moisture-resistant MDF and birch plywood, with cable openings and vents cut in.
- The unit is fitted and scribed to the walls, with a spray-painted or hand-painted finish and the routes left clear.
How to prepare
- Get any new sockets or wiring done by your electrician before fitting day
- Point out meters, boilers and fuse boards near the furniture
- Empty the space we’ll be working in
Arranging a design visit
Rough measurements are fine at the start. Everything is measured properly when we visit, including how level the floor and ceiling are. To arrange it, message us from the contact page with a few details about the room. The written quote follows the visit.