Enfield · London
Crews Hill Wall Beds
We make wall beds for homes in Crews Hill, designed around the room you have. We design your wall bed at a visit to your home, make it in our workshop and fit it.
- A playroom that can sleep visitors
- Somewhere comfortable for guests to sleep
- A home office that also sleeps guests
Wall beds for your home in Crews Hill
About our wall beds in Crews Hill
Many spare rooms are only just big enough for a bed, and the bed fills the room even when no one is staying. When the bed is folded away, the room is open again for a desk, a hobby or just space. When guests come, the bed folds down. Typical reasons to get in touch are a guest bed that disappears in the day and a study that doubles as a spare room, and the answer is built in our workshop from birch plywood and moisture-resistant MDF with a spray-painted or hand-painted finish.
Post-war bedrooms tend to be simple rectangles, with the window on one wall and the door near a corner. Around Crews Hill, many homes were built in the post-war decades, so fitted furniture can often take a whole wall without tricky cuts. We plan the space in front first, so everything opens fully.
The written quote puts the design visit in writing: the layout and internal fittings, the materials and the finish. If something isn’t quite right, tell us before anything is made.
- Location
- Crews Hill (EN2)
- Borough
- Enfield
- Cost
- Quoted for your room
- To begin
- Design visit, then a quote in writing
- Making
- Workshop-made, then fitted
- Made from
- Painted MDF and birch ply
- Fitting days
- Monday to Friday; Saturdays by arrangement
- Get in touch
- The contact form
- Last updated
- 27 October 2026
What we do not do
Not everything around wall beds is carpentry, from an electrician to a plumber or a Gas Safe registered engineer. Here’s what to know:
- New sockets, lighting or wiring (your electrician)
- Getting consent under your lease
- Strengthening or rebuilding a wall
If you’re not sure what’s possible in your room, you can fill in our short enquiry form and we’ll give you a straight answer before you arrange a visit. How it works.
Boards, parts and finishes
- Spray-painted finish
- Birch plywood
- Moisture-resistant MDF
- Shelves or a desk alongside
- Fold-down bed mechanism
- Hand-painted finish
Wall beds in Crews Hill: local notes
About 36% of the homes in the area around Crews Hill went up between 1945 and 1972, and about 34% before 1919, according to Valuation Office Agency council tax figures (2025). It is a good starting point, though every room is still measured, as two homes of the same age rarely match. Entries on the National Heritage List near the centre of Crews Hill include Glasgow Stud Farmhouse (Grade II), less than half a mile north, and Church of St John the Baptist (Grade II), about 0.6 miles south. If your own home is listed, works inside that affect its character, like fixing into or removing original joinery, can need listed building consent. Check with the council’s conservation officer first. Terraced houses are home to about 31% of households in the streets around Crews Hill, according to Census 2021. London terraces usually have a small back bedroom and alcoves in the main bedroom, both good spaces for fitted storage.
For families living near St John's CofE Primary School, wall beds in a child’s room can be planned so the inside layout changes as they grow. Living in a block of flats near Crews Hill station? Then wall beds are made in sections sized for the stairs, landings and lift, so measuring the route matters as much as measuring the room. For an older house near Church of St John the Baptist, a bedroom chimney breast and its alcoves often shape where wall beds go.
Crews Hill is about 4 miles south-east of Edmonton, part of the London Borough of Enfield. From period terraces to newer flats in Crews Hill, we measure the room as it is and design around it. Crews Hill is one of 26 places on our list for Enfield.
Postcode districts we cover here for wall beds: EN2. We cover homes on streets such as Rosewood Drive, Theobalds Park Road and Whitewebbs Road, along with the roads around them, whether you want wall beds or another piece made for the room. Other places close to Crews Hill include Clay Hill (1 mile south-east), Gordon Hill (1 mile south-east), Forty Hill (2 miles south-east), Enfield Chase (2 miles south) and Enfield (2 miles south). Across the rest of Enfield, our area takes in Edmonton (4 miles south-east), Palmers Green (4 miles south), New Southgate (5 miles south), Bush Hill Park (3 miles south), Upper Edmonton (5 miles south) and Oakthorpe Park (5 miles south).
What’s near Crews Hill
Around Crews Hill, we cover homes near Chace Community School and The Plough pub. Crews Hill has its own railway station: Crews Hill station. Other landmarks nearby include Chase Farm Hospital (1 mile south).
Practical tips
Fitted furniture is part of the room, so it is worth looking after. A few pointers help:
- Measure the clear space in front of the wall
- Consider how many people will sleep in it
- Choose a mattress that suits the mechanism
- Check your lease if you live in a flat
The mechanism maker’s guidance says how much bedding can stay on the bed when it folds away. Bulky duvets and pillows may need storing nearby.
Check how the cabinet will get into the room. Furniture made in a workshop comes in sections sized for stairs, landings and lifts, so tell us about narrow stairs or a small lift.
What it costs
What it costs comes down to the materials and the time involved. The main factors are:
- Stairs, lifts and the route to the room
- The overall size of the piece
- Hanging rails, shelves, drawers and other fittings inside
- How many doors and drawers there are
Parking is part of the price picture in London. Much of London is covered by controlled parking zones, so a van may need a visitor permit, a paid bay or a bay suspension near your home. Let us know about parking at the design visit, so it can be planned.
Helping us understand the room
Here’s what helps us most when you contact us:
- Pictures showing the full wall, from floor to ceiling
- Anything fixed to the wall that the furniture needs to work around
- Examples of the look you’re after
- What you’d like to store or use the space for
A quote begins with some details from you: which room it is, rough sizes and a couple of photos if you can take them. To send them, message us from the contact page. After that, we arrange a visit to measure and go through the design, then send a quote in writing.
How fitting works for wall beds
When we arrive on fitting day, the first job is covering the floors and protecting the way in from the front door. Next, we carry in the sections made at our workshop, one at a time. How long fitting takes depends on the design and how much storage goes around the bed, and we confirm the fitting days in your quote. Communal stairs in older blocks often have tight landings, so the size of each section is set by the stairs as well as the lift. Where the building has a caretaker or managing agent, it is useful to tell them before fitting day. Common parts are protected while we carry in.
- You contact us about a wall bed for a spare room or studio.
- We visit to measure the room and the way in, from the front door to the room itself.
- Your written quote sets out the design, materials and finish.
- The cabinet is made in our workshop from moisture-resistant MDF and birch plywood, in sections sized for the route.
- The cabinet is joined in the room, fixed securely and set level.
Getting ready for fitting day
- Check the building’s rules for trades and lift bookings
- Clear the area where the furniture is going
- Keep pets out of the room and the hallway
Getting a quote
To get a quote, fill in our short enquiry form and tell us which room you have in mind and what you want the furniture to do. We then arrange a design visit to measure and discuss the design, and a written quote follows.
Related advice
Is bespoke worth it?
A wall bed is fixed to the house, so it stays when you move. It is worth thinking about how long you plan to stay before you decide. Fixing standalone furniture to concrete or blockwork can be awkward, while fitted furniture is planned with the right fixings from the start. That matters for tall units and loaded shelves.
We do not publish set prices, because each job is designed for a single room. Instead, we measure, go through the design and then quote in writing. To start, get in touch through our contact form.
Why us?
- Built from moisture-resistant MDF and birch plywood
- A spray or hand-painted finish
- Saturdays by prior arrangement
- 300+ projects completed
Read our comparison of bespoke and off-the-shelf or what to look for in a quote.
Also near Crews Hill
Also in Crews Hill
Common questions about wall beds
I live near Crews Hill station. Is that in your area?
Yes, homes across Enfield and the rest of London are within the area we cover. You can get in touch through our contact form to arrange a design visit.
Do you make wall beds for homes in Crews Hill?
Yes, Crews Hill is within the area we cover, which takes in all of Enfield and the rest of London. We start with a design visit to measure the room and talk through what you need, followed by a quote.
Do you do the electrics?
No. Sockets, switches and lighting are for your electrician, and some electrical work in homes is covered by Part P of the Building Regulations. We plan the furniture around where they’ll go.
Is an outside wall a problem for fitted furniture?
External walls can be colder and damper than internal ones, so we allow for ventilation behind and inside the furniture. If there’s damp, it should be sorted before anything is fitted.
What if my walls and floors are out of level?
Walls and floors that are not true are part of the job in older homes. We trim the edges to follow the wall and level the base, so it sits tight to the room.
Can you build shelves or a desk around a wall bed?
Yes, that is a common request. Shelves and cupboards around the bed make the most of the space, and any new sockets are for your electrician.