Brent · London
Wall beds in Kensal Rise, Brent
Fold-down wall beds built into fitted cabinets, for homes in Kensal Rise. We make each piece in our workshop and fit it in your home.
- A home office that also sleeps guests
- A playroom that can sleep visitors
- A studio that works by day and night
Ask about wall beds in Kensal Rise
From workshop to your room
In older rooms, the furniture usually has to meet skirting, picture rails, cornice or coving. On fitting day, we cut and scribe the furniture around these details. How long fitting takes depends on the size of the bed and the cabinets around it, and the fitting days are agreed in your quote. Hallways in period houses are often narrow, and the stairs turn sharply, so the furniture comes in sections sized for the route in. Floors and stair carpets are protected on the way in and out.
- To begin, fill in our short enquiry form; a brief note on the room and how often guests stay is plenty.
- We visit to measure up, look at the wall and floor and make sure there is clear space in front to lower the bed.
- A written quote follows, covering the cabinet, the materials and the finish.
- The bed housing and any shelves or desk are built in our workshop from moisture-resistant MDF and birch plywood.
- We fit the cabinet in your home and fix the mechanism as its maker specifies.
- Before we leave we show you how to lower and lift the bed.
How to prepare
- Check the building’s rules for trades and lift bookings
- Get any new sockets or wiring done by your electrician before fitting day
- Clear the area where the furniture is going
How to get a quote
Because every job is different, the cost is set out in a written quote after the visit. Because every room is different, the quote comes after the design visit. To arrange a visit, send us a few details through our contact form.
Advice
Wall beds for homes in Kensal Rise
A wall bed, sometimes called a Murphy bed, lifts up into a cabinet during the day and is lowered again at night. It means a room can work as more than a bedroom, so a guest room can double as a study or playroom. We make the cabinet for your room and finish it to match. We make wall beds from birch ply and moisture-resistant MDF, painted by hand or sprayed, and people most often get in touch about a hobby room with a bed for guests and a guest room that sits empty most of the time.
Older London houses often have sash windows, and the window position and deep reveals affect where furniture can go. If your home is one of the many around Kensal Rise built before 1919, we plan the layout so the window opens fully and the light still comes in. Doors on fitted pieces are hung to clear the bed and any radiator.
Where other trades are needed, for instance an electrician to move a socket, we point that out, so it can be arranged before fitting day. Our quote covers the carpentry: the design, the materials and the finish.
- Location
- Kensal Rise (W10, NW10, NW6)
- Area
- Brent
- Cost
- Quoted for your room
- How it starts
- A design visit: we measure and talk it through
- Where it is made
- Made in our workshop and fitted on site
- Materials and finish
- Painted MDF and birch ply
- Fitting days
- Monday to Friday; Saturdays by arrangement
- Get in touch
- The contact form
- Page updated
- 27 October 2026
The problems wall beds solve
Working from home has changed how many spare rooms are used. People want a desk by day and a bed for visitors, and a fold-down bed lets it do both.
Wall beds can help with:
- More floor space in a studio flat
- A spare room that’s rarely slept in
- A bed that looks like cupboards by day
- A home office that also sleeps guests
For an older house near Church of St John the Evangelist, a bedroom chimney breast and its alcoves often shape where wall beds go.
Choosing a carpenter
- Is it spray painted or hand painted?
- How they’ll get the furniture into the room
- Will the quote be in writing?
- Whether the quote says what the furniture is made from
DIY, flat-pack or bespoke
Off-the-shelf cupboards come in fixed sizes, so there’s typically a gap left over at the top or at one end. Furniture we make is built to the room’s own sizes, so it can use the full height and width.
A confident DIYer can manage simple shelves or a standard wardrobe in a square room. Sloping ceilings, uneven floors and lath-and-plaster walls make it harder, where scribing and fixings that suit the wall are important.
Before and after fitting day
Most of what helps is simple. Here’s what we suggest:
- Follow the mechanism maker’s mattress guidance
- Lower and lift the bed steadily
- Leaseholders: check your lease first
- Give the paint time to cure fully
Check the mattress stays within the limits the mechanism maker sets, because a mattress outside those limits can affect the balance. A new mattress should suit the mechanism too.
Check how the cabinet will get into the room. We make the cabinet in sections that fit up the stairs and through the doors, so tell us about narrow stairs or a small lift.
Bedrooms in Kensal Rise: local notes
In the neighbourhood around Kensal Rise, the largest groups of homes date from before 1919 (about 53%) and between 1919 and 1939 (about 13%), based on the Valuation Office Agency’s 2025 council tax data. That matters for wall beds, as the build era decides whether a wall is solid brick, lath and plaster, block or plasterboard. Kensal Rise is partly covered by a conservation area, going by Historic England’s data. Fitted furniture inside a house doesn’t normally need planning permission in a conservation area, as the controls are mostly concerned with the outside of buildings. If in doubt, the council’s planning team can confirm. Strict stopping rules apply on red routes, which TfL runs. Where a home in Kensal Rise is on or beside a main road, it is useful to mention that during the design visit. We can then plan where the van will stop.
Living in a block of flats near Kensal Rise station? Then it is useful to book the lift and tell the concierge before fitting day. The wider area includes historic houses such as Winfield House, about 2.2 miles east. If your own home is a period one, a bedroom chimney breast and its alcoves often shape where wall beds go.
Kensal Rise is within the London Borough of Brent, about 1 mile north-east of Kilburn. Wherever you are in Kensal Rise, the process is the same: a design visit, a written quote, furniture built in our workshop and fitting in your home. Our Brent coverage includes Kensal Rise and the places around it.
In W10, NW10 and NW6, the process is the same as anywhere else in London. We cover homes on streets like Hazel Road, Hiley Road and Kempe Road, along with the roads around them, whether you want wall beds or another piece made for the room. We also cover the places around Kensal Rise: Kensal Green (1 mile west), Kilburn (1 mile north-east), Queen's Park (1 mile east), North Kensington (1 mile south) and Kensal Town (1 mile south-east). Other parts of Brent we cover include Neasden (2 miles north-west), Wembley (4 miles north-west), Kenton (5 miles north-west), Church End (2 miles north-west), Stonebridge (2 miles west) and Cricklewood (2 miles north).
Landmarks near Kensal Rise
Around Kensal Rise, we cover homes near Queens Park Community School, Brondesbury College and Paradise by Way of Kensal Green pub and the streets around them. Kensal Rise has its own railway station: Kensal Rise station. A little further out are Brent Museum and Archives (1.1 miles north-west) and Princess Louise Hospital (0.9 miles south). Open spaces near Kensal Rise include Greville Place nature reserve.
Common questions about wall beds
I live near Kensal Rise station. Is that in your area?
Yes, homes across Brent and the rest of London are within the area we cover. To get started, you can drop us a line using the contact form with a few details about the room.
Can you make wall beds for a home in Kensal Rise?
Yes. We cover all of Brent and the rest of London, and Kensal Rise is part of that. We start with a design visit to measure the room and talk through what you need, followed by a quote.
Does my lease affect fitted furniture?
Possibly. Some leases need the building owner’s consent before you make alterations, including fixing furniture to the walls. We cannot advise on leases, so please check yours.
Are fold-down beds safe to use?
Wall beds are made for regular use when fixed and used as its maker specifies. We fix the mechanism securely to a sound wall or floor, and you should follow the maker’s guidance on lowering and lifting it.
Can you come on a Saturday?
Yes, Saturdays are possible by prior arrangement. Let us know when you first get in touch.
How much room do I need in front of a wall bed?
You need clear floor in front of the cabinet for the bed to fold down, on top of the cabinet’s own depth. We measure this at the design visit and plan the layout around it.
Flats, leases and landlords
For a rented home, access for the design visit and fitting day has to be agreed with the tenants, at times that suit them. A letting agent can arrange this on a landlord’s behalf, and the written quote can go to whoever needs it.
Mansion blocks and purpose-built blocks often have house rules about lifts, entry systems and when trades can come in. Let us know about them at the design visit, so fitting day is planned around them.