Brent · London
Wall beds in Neasden, Brent
We make wall beds for homes in Neasden, designed around the room you have. Your wall bed is designed at a visit to your home and made in our workshop.
- A bed that looks like cupboards by day
- A study that doubles as a spare room
- A studio that works by day and night
Ask about wall beds in Neasden
About our wall beds in Neasden
Safety starts with the fixing: the mechanism is fixed as its maker specifies, into a wall or floor that’s sound enough to hold it. At the design visit we look at the wall it will go on as solid brick, stud walls and plasterboard all need different fixings. Typical reasons to get in touch are a home office that also sleeps guests and a proper bed instead of a sofa bed; the furniture is made from moisture-resistant MDF and birch plywood, spray-painted or hand-painted.
Around Neasden, with interwar houses or semis making up much of the housing, the third bedroom is often small, sitting over the stairs. That is where wall beds earn their place, making a small room work as a dressing room, a guest room or both. Nothing is assumed: the room is measured wall by wall.
Materials are named in the quote: moisture-resistant MDF, birch plywood or both, depending on the design. The finish is stated too, whether that is spray painting or hand painting.
- Place
- Neasden (NW10, NW2, NW9)
- Borough
- Brent
- Cost
- Quoted for your room
- How it starts
- We visit, measure, then quote
- Where it’s made
- Workshop-made, then fitted
- Made from
- MDF and birch plywood, painted
- Working days
- Weekdays; Saturdays on request
- Contact
- Send us a message
- Updated
- 27 October 2026
What happens on fitting day
On the morning of the fitting, we start by protecting your floors and the route from the front door to the room. The sections built in our workshop come in next, one at a time. How long the fitting takes depends on the bed, the cabinets and the wall it fixes to, and we confirm the fitting days in your quote. Interwar houses normally have a straight run of stairs and a reasonable hallway, though we still measure the route in along with the room itself. The furniture comes in sections and is put together where it is going, with floors protected throughout.
- You tell us about the room and who the bed is for. The bed can sit among shelves or beside a desk.
- We visit to measure up and look at what the wall is made of, as the bed must be fixed securely.
- We send a quote in writing for the bed cabinet and storage.
- The bed housing and any shelves are made in our workshop.
- We fit it in your home, with the mechanism fixed as its maker specifies. We show you how the bed works before we leave.
How to prepare
- Let us know if your street is in a controlled parking zone
- Move furniture and belongings away from the wall
- Leave a clear route from the front door to the room
How to get a quote
The quote is built from the design visit. We take full measurements, see how true the walls and floors are and work through the design together. A written quote follows the visit, so you can take your time with it. To book one, fill in our short enquiry form.
Read more
What wall beds can’t fix
We make and fit furniture, and we don’t do electrics, plumbing, gas, plastering or structural work. There are a few other points to bear in mind:
- Making good the walls after other work
- Getting consent under your lease
- Choosing a mattress for you
If you are not sure what’s possible in your room, you can tell us about the room on our contact form and we’ll give you a straight answer. Our process from visit to fitting.
Materials and parts
- Birch plywood
- Moisture-resistant MDF
- Hand-painted finish
- Spray-painted finish
- Fold-down bed mechanism
- Shelves or a desk alongside
Places near Neasden
More for homes in Neasden
What affects the price in Neasden
The price for your room depends on:
- Hanging rails, shelves, drawers and other fittings inside
- Whether you choose a spray or hand-painted finish
- The number of doors and drawers
- How big the furniture is
Access to the room makes a difference too. Narrow halls, tight stairs or a small lift may mean the furniture is made in more sections, and that’s part of the price. Because every job is different, the cost is set out in a written quote after the visit.
What we need to know
Before the design visit, it helps us to know about:
- Radiators, sockets, pipes or meters on or near the wall
- The postcode, so we can plan the visit
- Pictures of styles you like, if you have any
- What you’d like to store or use the space for
To make a start, use our contact form and tell us a little about the room. We then arrange a design visit to measure and talk through the design, and a quote in writing follows.
Flat-pack or bespoke?
Where bespoke earns its keep is in rooms that aren’t square. In period homes, walls lean, floors slope and the alcoves on each side are often different widths, which leaves standard units with gaps at the sides and top.
Standard units come in set widths and heights, so there’s normally a gap left over at the top or at one end. Fitted furniture is made to the room’s measurements, so it can use the full height and width.
Why bespoke in Neasden?
You can buy wall bed units off the shelf, often for less, and in a straightforward room they may be enough. They come in set sizes and finishes and rarely allow for an uneven wall or an alcove. A bespoke cabinet is built for the room. The spaces between doors, windows and radiators are seldom a stock size, which leaves ready-made pieces sitting awkwardly. Built-in pieces are planned around those fixed points.
How it’s painted is part of the price: spray painting happens in the workshop, and hand painting can be done in your home. Your choice, along with the size and the fittings, is reflected in the written quote.
Why choose us
- Every quote follows a design visit
- Workshop-made and fitted by us
- Moisture-resistant MDF and birch plywood
- We work across all London boroughs
See our comparison of bespoke and off-the-shelf and what to look for in a quote.
Questions from Neasden
My home in Neasden is a flat. How do you get the furniture in?
We measure the route in along with the room itself: the stairs, landings, lift and doors. The furniture is made in sections that fit the stairs and lift, and put together in the room. If your building has rules on lift booking or working hours, or your lease needs consent for alterations, it’s worth checking those early.
Can you fit furniture in a home close to Brent Cross West station?
Yes. We cover all of Brent and the rest of London. To get started, you can tell us about the room on our contact form with some details about the room, and let us know about parking and access at the same time.
Do I need to be at home on fitting day?
Someone needs to let us in at the start of the day. It is good to have someone there at the end to look over the work with us.
How long does fitting take?
Every room is different. How long fitting takes depends on the bed, the cabinets and the wall it fixes to, and your quote sets out the fitting days.
Do you move sockets or add lighting?
No. Any new wiring, sockets or lights need an electrician. We plan the furniture around where they’ll go.
Can I send pictures ahead of the visit?
Yes, they help. A few pictures of the room, from floor to ceiling, tell us a lot. You can send them when you send us a few details through our contact form.
Bedroom storage in Neasden
The biggest shares of homes in the neighbourhood around Neasden were built between 1919 and 1939 (about 40%) and before 1919 (about 33%), based on the Valuation Office Agency’s 2025 council tax data. Each era brings its own kind of wall, ceiling height and floor, so it shapes the design from the first measurement. Entries on the National Heritage List near the centre of Neasden include Church of St Mary (Grade II*), about 0.5 miles south, and Church of St Francis (Grade II), about 0.5 miles east. Where a home is listed, listed building consent can be needed for inside works that affect its character, such as fixing into original panelling. Ask the council’s conservation officer before anything is fixed. Parking controls in London are set borough by borough, so Brent has its own. If your road in Neasden falls in a zone, the van may need a visitor permit, a paid bay or a suspended bay, which the council arranges, often with notice. Let us know what the parking is like at the measuring visit.
If you live in a flat close to Brent Cross West station, wall beds are made in sections sized for the stairs, landings and lift, so measuring the route matters as much as measuring the room. Close to Gladstone Park? Keeping wall beds off the window wall keeps the room bright. Fenton House, about 2.9 miles east, is one of the historic houses in the wider area. If your own home is a period one, tall ceilings give wall beds room to reach the cornice.
Neasden is in the London Borough of Brent, about 2 miles south-east of Kilburn. Homes in Neasden are part of the area we cover for wall beds. Neasden is one of the places in Brent where we make wall beds, and the borough has 29 places on our list.
Every address in NW10, NW2 and NW9 is covered for wall beds. Streets in the area include Dog Lane, High Road and Ilex Road, and homes on each of them are within our area for wall beds. We also cover Brent Park (1 mile west), Church End (1 mile south), Willesden (1 mile south-east), Dollis Hill (1 mile north-east) and Willesden Green (1 mile south-east). We also make wall beds in nearby places like Kilburn (2 miles south-east), Wembley (2 miles west), Queen's Park (2 miles south-east), Kenton (3 miles north-west), Kensal Rise (2 miles south-east) and Brondesbury (2 miles east). Neasden is among the bigger places we cover in Brent.
Near you in Neasden
The streets we cover here include those near The Swaminarayan School and Crest Boys' Academy. The nearest railway station is Brent Cross West station, roughly 1.3 miles north-east. A little further out are Neasden Hospital (0.7 miles south-west) and London Designer Outlet (1.7 miles west).