Example photo by Franco Debartolo on Unsplash, not our project
Lewisham · London
Bellingham Window Seats
Window seats for your home in Bellingham: window seats for bays and under sash windows, with storage inside. We visit to measure and discuss the design, make the furniture in our workshop and fit it.
- Wanting new furniture to sit well in an older room
- Nowhere to keep blankets, toys or books
- A ready-made bench that doesn’t fit the bay
Window seats designed for your room
Window seats in Bellingham
We make each window seat in our workshop from moisture-resistant MDF and birch plywood. Birch plywood gives the seat its strength, as it’s strong and holds screws firmly, while MDF takes paint well for the fronts and panels. Once painted, by spray or by hand, it’s brought to your home in Bellingham and fitted. If you’re living with no space for toys and games and no comfortable place to sit in the light, window seats made from moisture-resistant MDF and birch plywood, spray-painted or hand-painted can solve it.
Around Bellingham, interwar houses or semi-detached and detached homes make up a good part of the housing. In a typical 1930s house, storage tends to hide in the bay, under the stairs and in the box room. Any meters or fuse boards that need to stay reachable are designed around.
If the job needs another trade, like an electrician or a plumber, we will tell you, so it can be arranged before fitting day. Our quote covers the carpentry: the design, the materials and the finish.
- Where
- Bellingham (SE6, SE26, SE23)
- Borough
- Lewisham
- Prices
- Quoted for your room
- To begin
- Design visit, then a quote in writing
- Making
- In our workshop, then fitted in your home
- Materials and finish
- MDF and birch plywood, painted
- Fitting days
- Weekdays (Saturdays if arranged)
- Enquiries
- Our contact form
- Updated
- 27 October 2026
Fitting day, step by step
However carefully a piece is made in the workshop, it still has to meet the room, and that happens on fitting day. Walls in older homes are rarely flat or square, so each edge that meets a wall is scribed to follow it, until the line is tight. How long the fitting itself takes depends on the size of the window and the design, and we confirm the fitting days in your quote. Loft stairs in an interwar house can be tight, with a low ceiling at the top, so any section going up there is sized for them. Elsewhere in the house, the route is typically more generous. The pieces are joined and fixed once in place.
- It starts when you get in touch about a window seat.
- We visit to measure and talk about how you’ll use the seat.
- A written quote follows, with the fitting days agreed.
- Your window seat is made in our workshop, shaped to the window, from moisture-resistant MDF and birch plywood.
- The seat is fitted and set level, ready for a cushion, with the lids or drawers checked with you.
Preparing the room
- Clear the walls of pictures and shelves
- Book any lift and let the concierge or building manager know
- Tell us about any meters, fuse boards or boilers in the area
Getting a quote
Getting a quote starts with a few details: which room it is, rough measurements and a couple of photos if you can take them. To send them, get in touch through our contact form. After that, we arrange a visit to measure and discuss the design, then send a quote in writing.
Related advice
Boards, parts and paint
Hand-painted finish
Some people prefer a hand-painted finish for its softer look. It’s done on site, in the colour you choose. It can be matched to the window woodwork.
Birch plywood
Its layered build gives birch plywood its strength. It goes into the frame, the seat top and the drawers, with the edge either shown or painted.
Window seats for homes in Bellingham
Homes built between 1919 and 1939 make up about 55% of the housing in the neighbourhood around Bellingham, with about 18% built before 1919, in the VOA’s 2025 council tax stock figures. It’s a good starting point, though every room is still measured, as two homes of the same age rarely match. 3 conservation areas have at least part of their area less than a mile from the middle of Bellingham. England has around 10,000 in all, and their controls are largely about how buildings look from outside, so fitted furniture inside a house doesn’t normally need planning permission. More than half of the homes in the neighbourhood around Bellingham (about 55%) date from between 1919 and 1939, according to Valuation Office Agency council tax figures (2025). Many houses of that era have bay windows, natural places for a window seat, with a grille where there is a radiator underneath.
If you live near Forster Memorial Park, living near green space often means muddy boots, bikes and outdoor kit, and window seats can give those things a place. If your children go to Elfrida Primary School or a school nearby, a place for each person’s coat and shoes stops the hallway filling up.
Bellingham is about 3 miles north of New Cross, within the London Borough of Lewisham. We work across all London boroughs and the City of London, and Bellingham is part of that. Bellingham is one of 22 places on our list for Lewisham.
We cover every part of the SE6, SE26 and SE23 postcode area. If your home is on a street such as Oslac Road, Orford Road and Aitken Road, or close by, we can visit to measure up for window seats. Main roads around Bellingham include the A2218. Other places close to Bellingham include Southend (1 mile north), Bell Green (1 mile west), Catford (1 mile north-east), Perry Vale (1 mile west) and Sydenham (1 mile west). We also make window seats in nearby places such as New Cross (3 miles north), St Johns (3 miles north), Deptford (3 miles north), Lewisham (2 miles north), Surrey Canal (4 miles north) and Hither Green (2 miles north-east).
Local landmarks in Bellingham
We fit furniture in homes around Sedgehill School and Fellowship Inn, among other places. Bellingham has its own railway station: Bellingham station. Other landmarks nearby include University Hospital Lewisham (1.6 miles north) and Prefab Museum (1 mile east). Open spaces near Bellingham include Downham Woodland Walk.
Your questions about window seats in Bellingham
Is Bellingham in the area you cover for window seats?
Yes, Bellingham is within the area we cover, which takes in all of Lewisham and the rest of London. The first step is a design visit, where we measure and discuss the design, and then we send a quote.
Will parking be an issue for fitting furniture in Bellingham?
It can be, as controlled parking zones cover much of inner London. Depending on the street, a visitor permit, a paid bay or a bay suspension through the council may be needed, and suspensions often need notice. It helps to let us know about parking at the design visit, and we’ll plan around it.
How is a window seat priced?
Every piece is quoted for your room after the design visit. It depends on the size and shape of the window, the storage you want and the finish. To get a quote, fill in our short enquiry form and we will arrange a design visit.
Do you do the electrics?
No. Electrical work isn’t something we do; it is a job for your electrician. We can allow for cable routes in the design, and any new sockets are best done before fitting day.
Can the fitting be on a Saturday?
Yes, by prior arrangement. If a Saturday works better for you, say so when you get in touch.
Should I send photos?
Yes, they help. Pictures of the whole wall or room, including the floor and ceiling, give us a good idea of the space, especially with rough sizes. You can send them when you drop us a line using the contact form.
Do you need window seats in Bellingham?
Most people simply want to use the window. A bay can be an awkward space for furniture, and a seat makes it part of the room. It becomes a place to sit, read or look out.
Most of the enquiries we get are about things like these:
- A child’s room that needs storage and seating
- An empty bay that doesn’t get used
- Nowhere to keep blankets, toys or books
- Wanting a seat without blocking the radiator
For an older house near St Dunstan, the deep reveals of an older window can frame a seat neatly.
What to check before you book
- How doors and drawers are fitted
- Real projects you can actually look at
- Are the boards named, such as MDF or plywood?
- How they deal with uneven walls and floors
What we don’t do
Some parts of a job need another trade, from an electrician to a plumber or a Gas Safe registered engineer. Here’s what to know:
- Moving or replacing a radiator, which is for your plumber
- Plastering and decorating around the seat
- Fabric covers and cushions
If in doubt, you can fill in our short enquiry form and describe the room. How it works.
Materials and parts
- Radiator grilles
- Spray-painted finish
- Hand-painted finish
- Birch plywood
- Lift-up lids or drawers
- Moisture-resistant MDF
Nearby places to Bellingham
Other services in Bellingham
Flats, conversions and leaseholders
Leaseholders should check the lease before anything is fixed to the walls. A lease can require consent from the building owner for alterations, which is worth sorting early. We cannot advise on your lease, so check it yourself or ask your managing agent.
In conversions and newer blocks, many internal walls are timber or metal stud with plasterboard. We choose fixings to suit the wall, after checking the walls at the design visit.