Example photo by Franco Debartolo on Unsplash, not our project
Bromley · London
Window Seats in Crofton
Window seats in Crofton: window seats for bays and under sash windows, with storage inside. We visit to measure and discuss the design, make the furniture in our workshop and fit it.
- A period room that needs furniture to suit it
- No comfortable place to sit in the light
- An empty bay that does not get used
Ask about window seats in Crofton
How we make window seats for Crofton
A window seat can hide a surprising amount of storage. A lift-up lid is simple and gives access to the full depth, while drawers are easier to reach if there is a cushion on top. We will talk through which suits the way you use the room. If you are living with a nursery or bedroom short of storage and looking for a reading spot by the window, that is what window seats are for, made from birch ply and moisture-resistant MDF, painted by hand or sprayed.
In an area where interwar homes or semis make up much of the housing, as around Crofton, many have had the loft converted, leaving low eaves and sloping ceilings. Fitted storage can make use of the eaves, the bay or the hall. For lofts, we work in spaces that are already converted or boarded.
The quote comes in writing, so there’s time to read it properly and share it with anyone else involved. It records the design, the materials and the finish we discussed.
- Where
- Crofton (BR6, BR5)
- Area
- Bromley
- Cost
- Quoted for your room
- How it starts
- We visit, measure, then quote
- Made
- Made in our workshop and fitted on site
- Materials and finish
- MDF and birch plywood, painted
- Fitting days
- Weekdays; Saturdays on request
- Contact
- Our contact form
- Last updated
- 27 October 2026
Storage in Crofton homes: local notes
In the streets around Crofton, the largest groups of homes date from between 1945 and 1972 (about 57%) and between 1919 and 1939 (about 31%), going by the Valuation Office Agency’s 2025 council tax figures. Knowing roughly when a home was built helps, because walls and fixings change from one era to the next. 4 conservation areas have at least part of their area less than a mile from the middle of Crofton. Historic England says England has around 10,000, and the controls mainly cover the outside of buildings. On TfL’s red routes, the rules on stopping and loading are strict. If your street in Crofton joins a main road, it’s worth telling us at the design visit. We can then plan where the van will stop.
For a flat near Orpington station, it’s useful to book the lift and tell the concierge before fitting day. If your home is as old as some of the listed buildings nearby, like Crofton Court, original features like shutters, panelling and fireplaces are worth designing around. For a listed home, fixing into original features may need listed building consent.
Crofton is about 1 mile north-east of Orpington, part of the London Borough of Bromley. Homes in Crofton are part of the area we cover for window seats, as part of our work in every London borough. Our Bromley coverage includes Crofton, along with the rest of the borough.
We cover every part of BR6 and BR5 for window seats. You will find streets here like Grange Road, Reed Avenue and Gumping Road, and we cover homes on all of them for window seats. If you’re just outside Crofton, we also cover Broom Hill (1 mile north-east), Locksbottom (1 mile west), Petts Wood (1 mile north), Farnborough (1 mile south) and Green Street Green (2 miles south). Across the rest of Bromley, our area takes in Bromley (3 miles north-west), Beckenham (5 miles north-west), St Mary Cray (2 miles north-east), Chislehurst (3 miles north), Penge (7 miles north-west) and Anerley (7 miles north-west).
What’s near Crofton
We fit furniture in homes around The Maxwell pub, Newstead Wood School and The Priory School and the streets around them. There’s a railway station in Crofton itself: Orpington station. Nearby you’ll also find Orpington Hospital (1.1 miles south-east) and Crofton Roman Villa (close by, under half a mile south-east).
Nearby places to Crofton
Boards, parts and paint
Doors and drawer fronts
We make the fronts from moisture-resistant MDF and finish them in the colour you choose. Panels can suit the shutters or doors in an older room. The lines are kept neat and even.
Hand-painted finish
Hand painting can be done on site once the seat is in. It is easy to touch up if it gets marked. That helps on a well-used seat.
Questions we’re often asked
Can you fit furniture in a home close to Orpington station?
Yes. We cover all of Bromley and the rest of London. To get started, you can tell us about the room on our contact form with some details about the room.
Can you make window seats for a home in Crofton?
Yes, Crofton is within the area we cover, which takes in all of Bromley and the rest of London. We start with a design visit to measure the room and talk through what you need, followed by a quote.
What if my walls and floors are out of level?
It’s something we deal with all the time. The furniture is scribed to follow the walls and levelled on feet or a plinth, so there are no gaps at the sides.
Do I need permission in a conservation area?
Not normally. Fitted furniture inside a house doesn’t normally need planning permission, even in a conservation area. If the building is listed, works affecting its character may need listed building consent, so ask the council’s conservation officer.
Do photos help?
Yes. They give us a feel for the space before we visit, along with rough sizes. It is useful to show radiators, sockets and anything else on the wall.
Which materials go into your window seats?
Moisture-resistant MDF and birch plywood, with a spray-painted or hand-painted finish. A moisture-resistant grade suits a spot by a window, where condensation can form. The materials and finish are agreed in your quote.
Honest limits
We make and fit furniture, and we don’t do electrics, plumbing, gas, plastering or structural work. Please bear these in mind too:
- Any wiring, which needs an electrician
- Seat cushions, which you source separately
- Repairs to sash windows, cills or shutters
If you are not sure what’s possible in your room, you can fill in our short enquiry form and we’ll give you a straight answer before you arrange a visit. How a job runs, step by step.
What goes into it
- Spray-painted finish
- Lift-up lids or drawers
- Birch plywood
- Moisture-resistant MDF
- Hand-painted finish
- Radiator grilles
The problems window seats solve
For a child’s room, a seat under the window adds storage and a cosy spot. Drawers make it easy for children to reach their things. It also keeps the floor clear.
Typical reasons people contact us include:
- Nowhere to keep blankets, toys or books
- No comfortable place to sit in the light
- Wanting new furniture to sit well in an older room
- Toys spread across a bedroom floor
If you live in a period home close to Church of Jesus Christ of Latter-Day Saints, a radiator under the window just needs a grille in the seat front.
Before you choose who makes it
- How the doors are hung and adjusted
- Is it spray painted or hand painted?
- How they deal with uneven walls and floors
- Where they’ll park and unload
Looking after your furniture
Because fitted furniture stays put, a little upkeep goes a long way. Here are a few tips worth knowing:
- Plan the cushion early so the seat suits it
- Mention any parking rules on your street
- Consider how often you will reach for what’s stored
- Note the position of any radiator and its pipes
A soft, damp cloth is the best way to keep the seat clean. Avoid scourers and harsh cleaners. The front edge of the seat is touched most, so give it a wipe now and then.
Condensation on the glass can drip onto the cill and the seat, so wipe it away. Keep the window ventilated in cold weather. Dry any water on the paint promptly.
Fitting day, step by step
With the carcasses fixed and level, any doors go on and any drawers or lids are fitted. Each one is adjusted until the gaps are even and it closes cleanly. The time the fitting takes depends on the size of the window and the design, and we confirm the fitting days in your quote. On fitting day, the sections are carried in, assembled, scribed to the wall and levelled. Hand-painted furniture can be finished on site; spray-painted pieces arrive finished from the workshop. Saturdays can be arranged.
- You send us a note about the window and the seat you’d like.
- We visit to measure and discuss the design, the storage and the finish.
- A written quote follows, with the finish written in.
- We build the seat in our workshop from moisture-resistant MDF and birch plywood, ready for the finish you chose.
- The seat is fitted and scribed, and any hand painting is done on site.
- Give new paintwork gentle use while it cures; a hand-painted finish is easy to touch up later.
Before fitting day
- Book any lift and let the concierge or building manager know
- Move anything in the hall or on the stairs out of the way
- Tell us about any meters, fuse boards or boilers in the area
Getting a quote
Prices are quoted for your room, once we’ve measured and talked through the design. Each room is different, so we quote after seeing it, when we’ve measured up and talked through the design. To arrange a visit, get in touch through our contact form.