Example photo by Franco Debartolo on Unsplash, not our project
Merton · London
Window seats in Raynes Park, Merton
Walls in older London homes are rarely straight, so we scribe the furniture to follow them. We make window seats for homes in Raynes Park, each designed at a visit to your home.
- Looking for a reading spot by the window
- Wanting new furniture to sit well in an older room
- A bay window that is hard to furnish
Window seats for your home in Raynes Park
Window seats for homes in Raynes Park
Some window seats are built in with shelves or cupboards around them. Bookshelves either side of a window, with a seat between, make a quiet place to read. We design the seat and the surrounding units together, so the lines and the finish match. It is worth talking through during the design visit in Raynes Park. Typical reasons to get in touch are wanting a quiet place to read and wanting new furniture to sit well in an older room; the furniture is made from MDF made to resist moisture and birch plywood, then spray-painted or hand-painted.
In an area where interwar homes or semis make up much of the housing, as around Raynes Park, loft conversions are common, and they leave low eaves and sloping ceilings. Fitted storage can make use of the eaves, the bay or the hall. We build storage in lofts that are already converted or boarded.
The quote comes in writing, so you can read it at your own pace and share it with anyone else involved. It records the design, the materials and the finish we discussed.
- Where
- Raynes Park (SW20, KT3, SM4)
- Area
- Merton
- Cost
- Quoted for your room
- To begin
- A design visit: we measure and talk it through
- Where it’s made
- In our workshop, then fitted in your home
- Boards and paint
- MDF and birch plywood, painted
- When we fit
- Weekdays; Saturdays on request
- Get in touch
- The contact form
- Page updated
- 27 October 2026
From workshop to your room
Furniture made in a workshop still has to meet the room it’s going into, and fitting day is where that happens. Few walls in older London homes are truly flat or square, so each edge that meets a wall is scribed to follow it, until the line is tight. How long the fitting itself takes depends on the size of the window and the design, and we confirm the fitting days in your quote. Clearing the room and the way in beforehand helps the day run well. Fitting day starts with protecting the floors and setting out the pieces. Each piece is levelled, scribed where the wall wanders and fixed to suit the wall.
- First you let us know about the bay or window where you’d like a seat, including any radiator under it.
- We come to measure and plan the seat, the storage and any radiator grille with you. We also talk about lift-up lids or drawers.
- You receive a written quote for the seat we have discussed, for you to look over.
- The seat is made in our workshop and painted to your chosen colour.
- We fit it in your home, scribed to the walls and the floor.
Preparing the room
- Tell us about parking near your home
- Clear the area where the furniture is going
- Leave a clear route from the front door to the room
Starting with a design visit
For a quote for window seats in Raynes Park, get in touch through our contact form. Let us know the room and the rough idea, plus any rough measurements. Next comes a design visit, followed by a quote in writing.
Read more
Neighbourhoods near Raynes Park
What else we make in Raynes Park
Flat-pack or bespoke?
Cost matters, and it’s fair to say so: flat-pack is normally cheaper to buy. Bespoke makes more sense where the room is tricky, the space is valuable or you want the furniture to look built in.
What you pay for with bespoke is mainly the fit: scribed edges, a level base on an uneven floor and furniture that meets the ceiling, skirting and picture rail. In an older room, standard units rarely manage that.
Boards, parts and paint
Spray-painted finish
For a crisp look, many people choose a spray-painted finish. It’s applied in our workshop, and the paint needs time to cure fully once fitted.
Pull-out drawers
Drawers let you see everything at once. Children can normally manage drawers more easily than a heavy lid. We make the boxes from birch plywood for strength.
Questions from Raynes Park
Can you fit furniture in a home close to Raynes Park station?
Yes, homes across Merton and the rest of London are within the area we cover. To get started, you can get in touch through our contact form with some details about the room, and let us know about parking and access at the same time.
Can you make window seats for a home in Raynes Park?
Yes, we work across Merton, Raynes Park included, and across the rest of London. You can send us a few details through our contact form to arrange a design visit.
Does someone need to be home during the fitting?
We need someone to let us in. It also helps to have someone around at the end, so we can go over the finished furniture together.
Does fitted furniture need planning permission?
Typically not. Fitted furniture inside a house doesn’t normally need planning permission, even in a conservation area. If the building is listed, works affecting its character can require listed building consent, so ask the council’s conservation officer.
How is a window seat priced?
The price comes in a written quote, worked out from the measurements and the design you choose. A bay with angled sides involves more work than a straight recess, and drawers more than a lid. We set it all out in a quote in writing.
How long is the fitting for a window seat?
How long fitting takes depends on the shape of the bay or recess and what goes under the seat, and we confirm the fitting days in your quote. The seat is built in our workshop first, so the time in your home is spent fitting. We keep the room as tidy as we can while we work.
Fitted storage in Raynes Park
Homes built between 1919 and 1939 make up about 48% of the housing in the neighbourhood around Raynes Park, with about 25% built before 1919, in the VOA’s 2025 council tax stock figures. Each era brings its own kind of wall, ceiling height and floor, so it shapes the design from the first measurement. 6 conservation areas have at least part of their area within a mile of the centre of Raynes Park. Historic England says England has around 10,000, and the controls mainly cover the outside of buildings, so fitted furniture inside a house doesn’t normally need planning permission. Red routes are run by TfL, with tight limits on where and when vehicles can stop. If your street in Raynes Park joins a main road, it is worth telling us at the measuring visit. Then we can work out where to load and unload.
Southside House, about 0.9 miles north, is one of the historic houses in the wider area. If your own home is a period one, a radiator under the window just needs a grille in the seat front. If your home is one of the older houses near St Saviour's Church, a radiator under the window just needs a grille in the seat front.
Raynes Park is in the London Borough of Merton, about 2 miles north-east of Wimbledon. Homes in Raynes Park are part of the area we cover for window seats. Across Merton, we cover Raynes Park and the places around it.
Every home in SW20, KT3 and SM4 is within our area for window seats, from the main roads to the quieter streets. Whether you live on a street such as Gore Road, Edna Road and Wyke Road or on one nearby, we can visit to measure up for window seats. Main roads around Raynes Park include the A238 and A298. If you’re just outside Raynes Park, we also cover West Barnes (1 mile south-west), Bushey Mead (1 mile north-east), Cannon Hill (1 mile east), Motspur Park (1 mile north-west) and Wimbledon Chase (1 mile north-east). Elsewhere in Merton, we also cover Wimbledon (2 miles north-east), Colliers Wood (3 miles east), Eastfields (3 miles east), South Wimbledon (2 miles north-east), Merton Abbey (2 miles east) and Mitcham (3 miles east).
What’s near Raynes Park
Our area takes in the homes around Raynes Park High School, The Raynes Park Tavern and Ursuline Preparatory School and the streets around them. Raynes Park has its own railway station: Raynes Park station. A little further out are Atkinson Morley Hospital (1 mile north) and Wimbledon Museum (1.5 miles north-east). Not far away are Derwent Floodwash.
Tips worth knowing
Most of what helps is simple. What we’d suggest:
- Bring paint colours you like to the design visit
- Think about whether you’d like shelves either side
- Make room so the whole bay can be measured
- Consider how often you will reach for what’s stored
Before we leave, we check every lid and drawer with you. If there is a radiator grille, we make sure the radiator is clear and the grille is in place. You will know it all works as it should.
Every so often, look at the hinges and any handles. Tightening early stops a small looseness getting worse. If a lid or drawer starts to catch, tell us about the room on our contact form and describe what’s happening.
What prompts window seats in Raynes Park
A quiet place to read is a common wish. A seat by the window, with books nearby, makes a natural reading corner. It is often the most-used seat in the house.
Typical reasons people contact us include:
- A child’s room that needs storage and seating
- Unused space below a sash window
- Wanting a quiet place to read
- Off-the-shelf pieces that never quite fit the window
If you live near Cannon Hill Common, living near green space often means muddy boots, bikes and outdoor kit, and window seats can give those things a place.
Before you choose who makes it
- How the furniture will be finished, and where
- Have they thought about parking near you?
- Real projects you can actually look at
- Who does any electrics, plumbing or gas work