Example photo by Kirsten Miles on Unsplash, not our project
Tower Hamlets · London
Loft storage in Donnybrook Quarter, Tower Hamlets
We make loft storage in moisture-resistant MDF and birch plywood for homes in Donnybrook Quarter. The finish is spray painted or hand painted, in a colour agreed with you.
- A loft room that doubles as an office or guest room
- A loft room that still feels unfinished
- Space under the eaves going to waste
Ask about loft storage in Donnybrook Quarter
Why bespoke in Donnybrook Quarter?
Off-the-shelf furniture is made for straight walls and full-height ceilings. In a loft room, standard pieces leave tricky gaps under the slope. Bespoke storage follows the angle of the ceiling and fills the knee wall. It’s a bigger investment, and the gain is the space it uses. Rooms in newer homes are often compact, and standard depths can take too much floor, whereas fitted pieces can be as shallow as the space needs. It can still go to the ceiling.
Access to the room makes a difference too. Several flights of stairs, a small lift or a narrow hall can mean smaller sections and more carrying, and that is part of the price. Every piece is quoted for your room after the design visit.
Why choose Bespoke Carpentry in Donnybrook Quarter
- Designed for the room you have
- Every London borough and the City of London covered
- More than 300 projects completed
- Saturday visits and fitting by arrangement
Read our comparison of bespoke and off-the-shelf or what a quote should include.
How we make loft storage for Donnybrook Quarter
A dormer can take shelves, a desk or a window seat. Their sides are often angled, and their walls rarely straight. We scribe the furniture to follow them. It adds storage without taking up the main floor. At the design visit in Donnybrook Quarter, we will look at what fits. Most enquiries start with space under the eaves going to waste and an empty dormer that could hold shelves; the furniture is made from MDF made to resist moisture and birch plywood, then spray-painted or hand-painted.
Hallways in newer flats and houses are often short, with doors opening off every side, so there may be only one useful stretch of wall. With many homes around Donnybrook Quarter built since 2000, the hall is often where we look first. A shallow cupboard can take coats, shoes and the vacuum cleaner without blocking a door.
A quote in writing follows the design visit. It describes the design we discussed, the materials and the finish.
- Where
- Donnybrook Quarter (E3, E9, E20)
- Borough
- Tower Hamlets
- Price
- Quoted for your room
- To begin
- Design visit, then a written quote
- Where it is made
- Made in our workshop and fitted on site
- Boards and paint
- MDF and birch plywood, painted
- When we fit
- Weekdays, and Saturdays by arrangement
- Contact
- Send us a message
- Updated
- 27 October 2026
Flats, blocks and rented homes
Blocks of flats often have their own rules on lift bookings, entry systems and times for trades. Let us know about them at the measuring visit.
We also make and fit furniture for landlords furnishing a let, as it makes good use of an awkward room. It is made from the same moisture-resistant MDF and birch plywood as any of our work, finished by spray or by hand.
Donnybrook Quarter homes and loft storage
Homes built since 2000 make up about 41% of the housing in the neighbourhood around Donnybrook Quarter, with about 22% built before 1919, in the VOA’s 2025 council tax stock figures. We take that into account during the design visit, since older and newer walls take different fixings. There are 18 entries on the National Heritage List within half a mile of the centre of Donnybrook Quarter. Being near listed buildings does not make a home listed, and you can check any address on Historic England’s list. About 66% of households in the neighbourhood around Donnybrook Quarter live in purpose-built flats, based on Census 2021. In a block, each section is sized to get up the stairs or into the lift and through the door. Many blocks have rules on lift booking and working hours, so check with the managing agent before fitting day.
If you live near Grove Hall Park, eaves cupboards can be designed to hold outdoor kit, from walking boots to picnic things. If your home is as old as some of the listed buildings nearby, such as Lock Cottages, original features like shutters, panelling and fireplaces are worth designing around. For a listed home, fixing into original features may need listed building consent. If you live in a flat close to Hackney Wick station, check any building rules on lifts and working hours early, and the sections will be sized for the way in.
Donnybrook Quarter is part of the London Borough of Tower Hamlets, about 2 miles south-west of Whitechapel. Wherever you are in Donnybrook Quarter, it works the same way: a design visit, a written quote, furniture made at our workshop and fitting in your home. We list Donnybrook Quarter among 31 places we cover in Tower Hamlets.
In E3, E9 and E20, the process is the same as anywhere else in London. You will find streets here like Lyal Road, Wick Lane and Dace Road, and we cover homes on all of them for loft storage. Neighbouring places we cover for loft storage include Old Ford (1 mile east), Fish Island (1 mile north-east), Bow (1 mile south), Hackney Wick (1 mile north-east) and Mile End (1 mile south). Other parts of Tower Hamlets we cover include Whitechapel (2 miles south-west), Spitalfields (2 miles south-west), Tower Hill (3 miles south-west), Shadwell (2 miles south), St George in the East (2 miles south-west) and Wapping (2 miles south-west).
What’s near Donnybrook Quarter
The streets we cover here include those near The Lea Tavern, Mulberry UTC and Mulberry UTC, among other places. Donnybrook Quarter’s nearest station is Hackney Wick station, roughly 0.5 miles north. Well-known places in the area include V&A East (0.8 miles north-east) and Westfield Stratford City (1.1 miles north-east). Green spaces nearby include Old Ford Island.
What it costs
A few things affect what fitted furniture costs:
- The width and height of the space
- The finish: spray painted or hand painted
- The number of doors and drawers
- What goes inside: rails, shelves, drawers and dividers
The price comes in a written quote, worked out from the measurements and the design you choose. A larger piece means more material and more time, so size is the starting point. After that, the number of doors and drawers, the internal fittings and the finish all play a part.
Helping us understand the room
Here’s what helps us most when you contact us:
- Anything fixed to the wall that the furniture needs to work around
- Pictures showing the full wall, from floor to ceiling
- Approximate measurements of the space
- Where you live, with the postcode
The design visit is where every quote starts. We measure the room properly, check how the walls and floors run and discuss the design with you. A quote in writing follows the visit, so you can take your time with it. To book one, tell us about the room on our contact form.
Questions from Donnybrook Quarter
My home in Donnybrook Quarter is a flat. How do you get the furniture in?
We measure the route in along with the room itself: the stairs, landings, lift and doors. Eaves cupboards are made in our workshop in sections sized to fit that route, then assembled in your flat. If your building has rules on lift booking or working hours, or your lease needs consent for alterations, it is worth checking those early.
Is parking a problem for fitting in Donnybrook Quarter?
It can be: much of inner London is covered by controlled parking zones. Depending on the street, a visitor permit, a paid bay or a bay suspension through the council may be needed, and suspensions often need notice. Let us know what parking is near you at the design visit.
How long is the fitting for eaves storage?
The time the fitting takes depends on the length of the eaves and the design, and your quote sets out the fitting days. We make the cupboards and drawers in our workshop, so the time at your home is spent fitting. Saturday fitting is possible by prior arrangement.
Do photos help?
Yes. They give us a feel for the space before we visit, along with rough sizes. It helps to show radiators, sockets and anything else on the wall.
Do I need to be at home on fitting day?
Someone needs to let us in. It also helps to have someone around at the end, so we can go over the finished furniture together.
Do you work on Saturdays?
Yes, we can arrange Saturdays. Let us know when you first get in touch, and we’ll see what we can do.
Fitting day, step by step
Once the main sections are fixed in place, any doors go on and any drawers or lids are fitted. Each one is adjusted until the gaps are even and it closes cleanly, then checked again. How long the fitting takes depends on the length of the eaves and the design, and your quote sets out the fitting days. On the day, floors are covered first and the sections brought in. The pieces are levelled and fixed with fixings that suit the wall. Hand-painted finishes can be completed once the furniture is in.
- It starts with some details from you.
- We come to measure and discuss the design and finish.
- A written quote follows.
- The storage is made at our workshop from moisture-resistant MDF and birch plywood, and sprayed there if you chose a spray finish.
- We fit it in the loft and check each door and drawer with you.
- Fresh paint needs time to cure, so use the doors and drawers gently at first.
Before fitting day
- Let us know where the boiler and meters are
- Take anything hanging off the wall we’re fitting to
- Mention any parking restrictions on your street
Starting with a design visit
We quote once we’ve seen the room. At the visit, we measure, look at the walls and floors and talk through the design with you, and the written quote comes after. Your quote is written for your room once we’ve visited and measured. To arrange a visit, use our contact form.
Advice
How it is made
Birch plywood
Birch plywood is made in layers, which makes it strong and stable. We use it for carcasses, shelves and drawer boxes, with the edge either shown or painted.
Doors and drawer fronts
The doors and drawer fronts are the face of the storage. They can be plain or panelled, with handles chosen to suit the room. Their tops follow the line of the slope.