Example photo by Kirsten Miles on Unsplash, not our project
Tower Hamlets · London
Mile End Loft Storage
Loft storage in Mile End: eaves cupboards, drawers and wardrobes in converted lofts. Each piece is designed at a visit to your home, built in our workshop and fitted by us.
- A sloping ceiling with no room for a wardrobe
- A loft room with too many jobs
- A dormer that is not being used
Loft storage for your home in Mile End
How we price loft storage
There’s no set price, because there’s no set room. What affects it comes down to:
- Spray painting or hand painting
- Parking and unloading on your street
- The internal fittings
- Stairs, lifts and the route to the room
Awkward rooms take more time: uneven walls, sloping floors and angled ceilings all add scribing and cutting on site. The quote allows for it, written once we’ve measured up.
What to send when you get in touch
To give us a picture of the room, it helps to include:
- Approximate measurements of the space
- What you’d like to store or use the space for
- Where you live, with the postcode
- Anything fixed to the wall that the furniture needs to work around
We quote once we’ve seen the room. We measure the space, check the walls and floors and discuss what you’d like, then send a written quote. Your quote is written for your room once we’ve visited and measured. To arrange a visit, get in touch through our contact form.
Loft storage for homes in Mile End
We make each eaves cupboard in our workshop from moisture-resistant MDF and birch plywood. Birch plywood is strong and holds screws well, which suits drawer boxes and carcasses, while MDF takes paint well for the doors and panels. It is then spray-painted or hand-painted and fitted in your home in Mile End. If your home has an empty dormer that could hold shelves and a new loft conversion that needs storage, eaves cupboards made from birch plywood and moisture-resistant MDF with a spray-painted or hand-painted finish can solve it.
Many homes around Mile End were built since 2000, and across London a lot of homes from those years are flats with compact layouts. Boilers, cylinders and consumer units often sit in a hall cupboard, and any new storage keeps their access and ventilation. Cupboards can be shallow where space is tight, so the hallway still feels open.
After the design visit, we send you a written quote. It describes the design we discussed, the materials and the finish.
- Location
- Mile End (E3, E1, E14)
- Borough
- Tower Hamlets
- Cost
- Quoted for your room
- How it starts
- Design visit, then a written quote
- Making
- Made in our workshop and fitted on site
- Made from
- MDF and birch plywood, painted
- Fitting days
- Monday to Friday; Saturdays by arrangement
- Enquiries
- Our contact form
- Last updated
- 27 October 2026
Flats, leases and landlords
For a rented home, access for the design visit and fitting day has to be agreed with the tenants, at times that suit them. A letting agent can arrange this on a landlord’s behalf.
Landlords furnishing a let use fitted furniture too, often to make the most of a small or awkward room. The materials are the same as for any home: moisture-resistant MDF and birch plywood, with a spray or hand-painted finish.
Is bespoke worth it?
Ready-made wardrobes and cupboards are built for standard rooms. Under a slope, it leaves large gaps and wasted space. Storage made for the loft follows its shape. It costs more than off-the-shelf furniture, and what you gain is the space a standard piece can’t reach. Big standalone units can dominate a compact room, while fitted furniture, painted in a colour that suits the walls, reads as part of the room.
How it is painted is part of the price: spray painting happens in the workshop, and hand painting can be done in your home. The written quote reflects your choice, along with the size and fittings.
Why choose Bespoke Carpentry in Mile End
- Built around your room
- We work across all London boroughs
- A design visit, then a written quote
- Spray painted or hand painted, in the colour you choose
Take a look at bespoke vs off-the-shelf or what to look for in a quote.
Materials and finishes
Moisture-resistant MDF
In a loft, stability matters, and moisture-resistant MDF is stable. It gives a smooth base for paint. It is used for most of the visible parts.
Pull-out drawers
Drawers along the knee wall make a neat, low run of storage. The top can be a surface for books or lamps. The design visit settles the mix.
How fitting works for loft storage
Getting everything level comes first. Where the floor slopes, we bring the furniture up to level on adjustable feet or a plinth, and that keeps the doors and shelves true. After that, it’s fixed to the wall using fixings that suit the wall, whether that is solid brick, lath and plaster or plasterboard. Newer homes often have stud walls, so fixings go into the studs or use fixings made for the board. Floors are protected throughout, as many newer homes have finished floors that mark easily, and dust is kept to a minimum.
- You tell us about your converted or boarded loft, including the eaves and any dormer.
- We measure the eaves, the slopes and the stairs up to the loft.
- The design is agreed and a written quote follows, with the finish set out.
- The storage is made at our workshop, in sections sized for the stairs.
- We carry it up, fit it and check every door and drawer with you. Any hand painting is done in the loft.
Preparing the room
- Keep pets in another room while we work
- Take anything hanging off the wall we are fitting to
- Empty the space we’ll be working in
Starting with a design visit
To get a quote, fill in our short enquiry form and tell us a little about the room and roughly what you’d like. From there, we arrange a design visit to measure up and talk through your ideas, and send you a quote in writing afterwards.
Related advice
Mile End homes and loft storage
Homes built since 2000 make up about 45% of the housing in the area around Mile End, with about 21% built between 1945 and 1972, based on the Valuation Office Agency’s 2025 council tax data. Each era brings its own kind of wall, ceiling height and floor, so it shapes the design from the first measurement. The National Heritage List has 86 entries within half a mile of the centre of Mile End. Original fireplaces, shutters and panelling are worth keeping where they survive, and eaves cupboards can be designed to work around them. Purpose-built flats are home to about 77% of households in the area around Mile End, the 2021 Census shows. For a flat, eaves cupboards are made in sections sized for the stairs, the lift and the doors. Many blocks have rules on lift booking and working hours, so check with the managing agent before fitting day.
For families living near Beatrice Tate School, a place for each person’s coat and shoes stops the hallway filling up. Living in a block of flats near Limehouse station? Then it’s useful to book the lift and tell the concierge before fitting day. Near listed buildings like Phoenix School, less than half a mile north-east of the centre of Mile End, older homes may keep original joinery that eaves cupboards can be designed around. If your own home is listed, check with the council before fixing into original features.
Mile End is about 2 miles west of Whitechapel, within the London Borough of Tower Hamlets. We can visit homes in Mile End on weekdays, or on a Saturday by arrangement. Across Tower Hamlets, we cover Mile End.
We work across E3, E1 and E14. You will find streets here such as Bow Road, Bale Road and Toby Lane, and homes on each of them are within our area for loft storage. The A1205 run close to Mile End; on busy main roads, unloading eaves cupboards takes a little planning. If you’re just outside Mile End, we also cover Bow (1 mile north), Bow Common (1 mile south-east), Bromley (1 mile east), Limehouse (1 mile south) and Donnybrook Quarter (1 mile north). Across the rest of Tower Hamlets, our area takes in Whitechapel (2 miles west), Spitalfields (2 miles west), Tower Hill (2 miles south-west), St George in the East (2 miles south-west), Wapping (2 miles south-west) and Isle of Dogs (3 miles south).
Landmarks near Mile End
In Mile End, that includes homes near Malmesbury Primary School and Lord Tredegar Public House and the streets around them. Mile End’s nearest station is Limehouse station, about 0.9 miles south of the centre. Nearby you will also find Westfield Stratford City (1.7 miles north-east) and St Clement's Hospital (under half a mile north-east). Open spaces near Mile End include Old Ford Island.
Your questions about loft storage in Mile End
Do I need permission for fitted furniture in a conservation area?
Not normally. Conservation area controls are mainly about the outside of buildings, so fitted furniture inside a house does not normally need planning permission. If your home is listed, works inside that affect its character may need listed building consent, so check with the council first. If you’re unsure, the council can confirm.
Do you make loft storage for homes in Mile End?
Yes, we work across Tower Hamlets, Mile End included, and across the rest of London. You can get in touch through our contact form to arrange a design visit.
What materials do you use for loft storage?
We use moisture-resistant MDF and birch plywood. The carcasses and drawer boxes are birch plywood, which is strong and holds screws well, while the doors and panels are MDF, which paints well. Everything is finished by spray painting or hand painting.
Can you convert my loft as well?
No, we build storage in lofts that are already converted or boarded. Loft conversions are building work, with Building Regulations to follow. When the room is finished, we can plan the storage.
Do photos help?
Yes, they help. A few pictures of the room, from floor to ceiling, tell us a lot, particularly with rough sizes. You can send them when you message us from the contact page.
Who chooses the colour?
The choice is yours, and we agree it with you before the furniture is finished. Spray and hand-painted finishes both use the colour you’ve chosen.