Hillingdon · London
Wall beds in Hatton, Hillingdon
We make wall beds for homes in Hatton, designed around the room you have. We design your wall bed at a visit to your home, make it in our workshop and fit it.
- Storage built around a fold-down bed
- A guest room that sits empty most of the time
- More floor space in a studio flat
Ask about wall beds in Hatton
Wall beds in Hatton: what you get
The bed mechanism must be fixed securely, exactly as its maker specifies, to a wall and floor that can take the load. At the design visit we look at the wall it will go on as solid brick, stud walls and plasterboard all need different fixings. If you’re living with a bed that looks like cupboards by day and a hobby room with a bed for guests, that is what wall beds are for, made from moisture-resistant MDF and birch plywood, spray-painted or hand-painted.
A bedroom in a house from between the wars normally has simpler mouldings than a Victorian one, so fitted furniture can often run neatly to the ceiling. Around Hatton, where interwar homes, semis and detached houses are a big part of the housing, the top cupboards can hold suitcases and spare bedding. Skirting boards are cut around neatly.
Once you’ve read the quote and decided to go ahead, the furniture is made in our workshop. The quote sets out the agreed design, materials and finish, so you can check every detail beforehand.
- Where
- Hatton (TW14, TW6, TW4)
- Area
- Hillingdon
- Cost
- Quoted for your room
- First step
- We visit, measure, then quote
- Where it is made
- In our workshop, then fitted in your home
- Boards and paint
- MDF and plywood, painted to order
- Fitting days
- Weekdays (Saturdays if arranged)
- Get in touch
- Send us a message
- Last updated
- 27 October 2026
When you need someone else
Not everything around wall beds is carpentry, such as an electrician, a plumber or a Gas Safe registered engineer. Here’s what to know:
- Structural work to the wall or floor
- Decorating around the cabinet
- Lease checks, which are for you and your building’s managers
If you are not sure what’s possible in your room, you can send us a few details through our contact form and we will give you a straight answer. Our process from visit to fitting.
Boards, parts and finishes
- Fold-down bed mechanism
- Shelves or a desk alongside
- Birch plywood
- Moisture-resistant MDF
- Hand-painted finish
- Spray-painted finish
Bedrooms in Hatton: local notes
Homes built between 1919 and 1939 make up about 40% of the housing in the area around Hatton, with about 31% built between 1945 and 1972, on the Valuation Office Agency’s council tax figures for 2025. It is a good starting point, though every room is still measured, as two homes of the same age rarely match. Near the centre of Hatton, Historic England’s list includes Green Man Public House (Grade II), under half a mile south-east. Listing covers the inside of a building as well as the outside, so works that affect a listed home’s character, like removing original joinery, can need listed building consent. An early word with the council’s conservation officer is the best first step. About 46% of households in the streets around Hatton live in detached or semi-detached houses, the 2021 Census shows. A house like that normally has more rooms to plan around than a flat, and sometimes a driveway that makes unloading easier.
If you live in a period home close to The Parish Church of the Good Shepherd, a bedroom chimney breast and its alcoves often shape where wall beds go. If you live near Hounslow Heath, keeping wall beds off the window wall keeps the room bright. If your children go to Cranford Primary School or a school nearby, the inside of wall beds can be laid out with adjustable shelves, so the space keeps up as children grow.
Hatton is in the London Borough of Hillingdon, about 8 miles north of Ruislip. Homes in Hatton are part of the area we cover for wall beds. Hatton is one of the places in Hillingdon where we make wall beds, and the borough has 17 places on our list.
Every home in TW14, TW6 and TW4 is within our area for wall beds. Our area takes in homes on streets such as Faggs Road, Envoy Avenue and Myrtle Avenue, along with the roads around them, whether you want wall beds or another piece made for the room. The A30 run close to Hatton, so if your home is on a main road, mention it when you contact us. Nearby, we also make wall beds in Cranford (1 mile north-east), Harlington (1 mile north-west), Bedfont (1 mile south-west) and Feltham (1 mile south). Other parts of Hillingdon we cover include Ruislip (8 miles north), Hayes (3 miles north), Hillingdon (5 miles north), Yeading (5 miles north), Yiewsley (5 miles north) and West Drayton (3 miles north-west).
Around Hatton
Around Hatton, we cover homes near Rivers Academy West London and Green Man Public House and the streets around them. The closest station to Hatton is Heathrow Terminal 4 Rail station, roughly 1.2 miles south-west of the centre. A little further out are Harlington (1.9 miles north-west). Green spaces nearby include Crane Meadows.
How fitting works for wall beds
Before anything is fixed, we set the furniture level. Floors are often out of level, so adjustable feet or a plinth take up the difference. Only then is it fixed to the wall, with fixings chosen to suit brick, lath and plaster or plasterboard. In a 1920s or 1930s house, the hall and stairs are normally simple, but the route in is still measured, not just the room. The furniture comes in sections and is put together where it’s going, with floors protected throughout.
- You get in touch with a few details about the room. Mention who the bed is for.
- The design visit covers measuring, the wall and the layout.
- A quote in writing is sent to you.
- The cabinets are made in our workshop from moisture-resistant MDF and birch plywood.
- We fit the bed and storage in your home, with the mechanism fixed as its maker specifies.
Before we arrive
- Get any new sockets or wiring done by your electrician before fitting day
- Tell us about any meters, fuse boards or boilers in the area
- Check the building’s rules for trades and lift bookings
Starting with a design visit
To make a start, drop us a line using the contact form and tell us a little about the room and roughly what you’d like. We then arrange a design visit to measure and go through the design, and send you a quote in writing afterwards.
Read more
Your questions about wall beds in Hatton
Do you cover homes near Heathrow Terminal 4 Rail station?
Yes. We cover all of Hillingdon and the rest of London. You can send us a few details through our contact form to arrange a design visit, and tell us about parking and access at the same time.
Can parking be tricky on fitting day in Hatton?
It can be, depending on whether your street is in a controlled parking zone. Depending on the street, a visitor permit, a paid bay or a bay suspension through the council may be needed, and suspensions often need notice. It’s useful to let us know about parking at the measuring visit.
Do photos help?
Yes. They give us a feel for the space before we visit, along with rough sizes. It is useful to show radiators, sockets and anything else on the wall.
How long will the wall bed take to fit?
The time the fitting takes depends on the bed, the cabinets and the wall it fixes to, and the fitting days are agreed in your quote.
What space does a fold-down bed take up?
It depends on the bed size and the mechanism. We measure up and make sure the bed has room to fold down.
Do you work on Saturdays?
Yes, we can arrange Saturdays. Just mention it when you get in touch.
When is bespoke worth it?
Where bespoke earns its keep is in rooms that are not square. Older London rooms tend to have leaning walls, sloping floors and alcoves of different widths, and standard units leave gaps.
It is worth being honest about cost: flat-pack is typically cheaper to buy. Bespoke makes more sense where the room is awkward, the space is valuable or you want the furniture to look built in.
Made for the room, or bought in a box?
A wall bed is fixed to the house, so it stays when you move. How long you will be in the home is worth weighing up before choosing built-in. Doors, windows and radiators rarely leave a gap that matches a standard width, so ready-made furniture often ends up in the wrong place. Built-in pieces are planned around those fixed points.
Awkward rooms take more time: uneven walls, sloping floors and angled ceilings all add scribing and cutting on site. The quote allows for it, written once we’ve measured up.
Why choose Bespoke Carpentry in Hatton
- Work across the whole of London
- 300+ projects completed
- Every quote follows a design visit
- Scribed to uneven walls
See our comparison of bespoke and off-the-shelf and what to look for in a quote.
Flats, conversions and leaseholders
In a flat, the route in matters as much as the room. We measure the stairs, landings, lift and doorways along with the room itself, so the furniture can be made in sections that fit through without a struggle.
For a rented home, access for the design visit and fitting day has to be agreed with the tenants, at times that suit them. A letting agent can arrange this on a landlord’s behalf.