Example photo by Franco Debartolo on Unsplash, not our project
Westminster · London
Marylebone Window Seats
Few London rooms are perfectly square, and we scribe the furniture to follow the walls. Our work on window seats in Marylebone starts with a design visit, and everything is made at our workshop.
- A bay window that’s hard to furnish
- A radiator that makes the space hard to use
- Wanting new furniture to sit well in an older room
Window seats in Marylebone
Flats, conversions and lettings
If your building is on a red route or a busy main road, getting the furniture from the van to the door needs planning. Red routes are run by TfL and have strict stopping rules, so it’s worth raising during the design visit.
Landlords furnishing a let use fitted furniture too, as it makes good use of an awkward room. The materials are the same as for any home: moisture-resistant MDF and birch plywood, with a spray or hand-painted finish.
How we make window seats for Marylebone
A seat under a bedroom or nursery window can store toys, bedding or books. With deep drawers or a lift-up lid, it becomes useful storage as well as a place to sit. For children’s rooms, drawers are often easier for small hands than a heavy lid. Whatever the room, the process for a home in Marylebone is the same. Most enquiries start with no comfortable place to sit in the light and wanting new furniture to sit well in an older room, and the answer is made in our workshop from moisture-resistant MDF and strong birch plywood, with a painted finish.
In streets where many homes were built before 1919, as they were around Marylebone, under-stairs cupboards in older terraces often house the meters or the fuse board. Those have to stay reachable, so any storage is designed around them. Sash and bay windows are common in houses of that age too, and good places for seating with storage below.
After the design visit, we send you a written quote. It describes the design we discussed, the materials and the finish, so you know exactly what you are getting.
- Place
- Marylebone (W1U, W1T, W1K)
- Area
- Westminster
- Prices
- Quoted for your room
- To begin
- A design visit: we measure and talk it through
- Made
- Made in our workshop and fitted on site
- Materials and finish
- MDF and birch plywood, painted
- Working days
- Weekdays; Saturdays on request
- Get in touch
- The contact form
- Page updated
- 27 October 2026
From workshop to your room
You’re welcome to ask questions while we work. The design, materials and finish were settled before anything was made, so the day itself is about careful fitting. How long the fitting takes depends on whether the seat has drawers, a lift-up lid or a radiator grille, and the fitting days are agreed in your quote. On fitting day in an older house, the main job is scribing to walls and levelling on floors that slope, so each piece is trimmed and adjusted on site. We protect the floors and keep dust to a minimum. It helps to tell us about parking during the design visit, as terraced streets are often busy.
- You get in touch with a few details about the window. Say how you’d like to use it, if you know.
- At the design visit, we look at the window, the radiator and what you need.
- Your quote sets out the design, the materials and the finish. Read it through and ask if anything is unclear.
- Your window seat is made in our workshop, shaped to the window.
- The seat is fitted and set level, ready for a cushion, with the lids or drawers checked with you.
Getting ready for fitting day
- Book any lift and let the concierge or building manager know
- Get any new sockets or wiring done by your electrician before fitting day
- Make sure pets are kept safely away
How to get a quote
To get a quote for window seats in Marylebone, message us from the contact page. Tell us which room it is and roughly what you have in mind. Next comes a design visit, followed by a quote in writing.
Read more
Materials and finishes
Lift-up lids
Lift-up lids are a simple way to add storage under a seat. You will need to move any cushion to open it, so it suits things you reach for now and then.
Moisture-resistant MDF
Next to a cold window, a moisture-resistant grade of MDF is a good choice. It gives a smooth base for paint, and it stays stable once fitted.
Looking after your furniture
Because fitted furniture stays put, a little upkeep goes a long way. A few pointers help:
- Bring paint colours you like to the design visit
- Mention any parking rules on your street
- Clear the bay or window area before the design visit
- Check whether there is a radiator under the window
Small marks on a hand-painted finish can be touched in. It’s worth keeping a record of the paint colour. Spray-painted surfaces wipe clean with a soft, damp cloth.
Keep the radiator grille clear so the heat can reach the room. A clear grille keeps the room warm and the seat at an even temperature. Storage over a radiator stays warm, so it is best for things that do not mind it.
Window seats in Marylebone: local notes
Homes built before 1919 make up about 50% of the housing in the neighbourhood around Marylebone, with about 15% built between 1919 and 1939, on the Valuation Office Agency’s council tax figures for 2025. The age of a home tells us a lot about its walls, floors and ceilings, and so about how window seats are fixed and fitted. 19 conservation areas have at least part of their area within a mile of central Marylebone. England has around 10,000 in all, and their controls are mostly concerned with the outside of buildings. Much of inner London is covered by controlled parking zones run by the boroughs. That normally means a van in Marylebone needs a visitor permit, a paid bay or a bay suspension through the council. Parking is worth mentioning at the design visit, so we can plan the day around it.
If your home is one of the older houses near Russian chapel on Welbeck Street, a bay or a sash window is a natural place for a window seat. If your home is as old as some of the listed buildings nearby, like Chandos House, original features like shutters, panelling and fireplaces are worth designing around. For a listed home, fixing into original features can need listed building consent. Handel Hendrix House, about 0.3 miles south, is one of the historic houses in the wider area. If your own home is a period one, a seat under a sash window can keep shutters and cills clear.
Marylebone is within the City of Westminster, about 1 mile south-west of City of Westminster. Wherever you are in Marylebone, it works the same way: we visit and measure, send a quote in writing, make the furniture in our workshop and fit it. Marylebone is one of the places in Westminster where we make window seats, and the borough has 29 places on our list.
Postcode districts we cover here for window seats: W1U, W1T and W1K. You’ll find streets here such as Park Lane, Duck Lane and Bruton Lane, and we cover homes on all of them for window seats. The A400 and A401 runs close to Marylebone, so if your home is on a main road, mention it when you contact us. We also cover the places around Marylebone: City of Westminster (1 mile south-west), Mayfair (1 mile south), Fitzrovia (1 mile north-east), Burlington Estate (1 mile south-east) and Soho (1 mile south-east). We also make window seats in nearby places such as Victoria (2 miles south), Westbourne (2 miles west), Little Venice (2 miles west), Westbourne Green (2 miles west), Pimlico (2 miles south) and Maida Vale (2 miles west). Marylebone is one of the larger places we cover in Westminster.
What’s near Marylebone
We fit furniture in homes around Royal Society of Medicine Library, The St Marylebone CofE School and The St Marylebone CofE School and the streets around them. Marylebone has its own railway station: Bond Street station. Other landmarks nearby include Respiratory Clinical Trials (less than half a mile north) and Montfichet's Tower (2 miles east). Open spaces near Marylebone include St. James's Park Lake.
Questions from Marylebone
Can you fit window seats to the uneven walls of an older house in Marylebone?
Yes. Walls in older houses are rarely flat or square, and floors are often out of level, so each piece is scribed to follow the wall and set level on a plinth or adjustable feet. Skirting, picture rails and cornices are met neatly or cut around. Older walls can be solid brick or lath and plaster, and the fixings are chosen to suit.
My home in Marylebone is a flat. How do you get the furniture in?
We measure the route in not just the room: the stairs, landings, lift and doors. Window seats are made at our workshop in sections sized to fit that route, then assembled in your flat. If your building has rules on lift booking or working hours, or your lease needs consent for alterations, it is worth checking those early.
Do I need permission in a conservation area?
Not normally. Conservation areas mostly control changes to the outside, and fitted furniture inside a house doesn’t normally need planning permission. Listed buildings are different: check with the council’s conservation officer first.
Can you fit furniture on an external wall?
External walls can be colder and damper than internal ones, so we allow for ventilation behind and inside the furniture, which helps avoid condensation and mould. Any damp needs sorting by the right specialist before fitting.
Should I send pictures?
Yes. They give us a feel for the space before we visit. It is useful to show radiators, sockets and anything else on the wall.
How long will the window seat fitting take?
How long the fitting takes depends on the shape of the bay or recess and what goes under the seat, and the fitting days are agreed in your quote. The seat is made in our workshop first, so the time in your home is spent fitting. We work tidily and keep the room as clear as possible.
When you need someone else
We make and fit furniture, and we do not do electrics, plumbing, gas, plastering or structural work. There are a few other points to bear in mind:
- Repairs to sash windows, cills or shutters
- Electrical work around the seat
- Making the seat cushion, which isn’t our work
Not sure whether your space suits window seats? You can use our contact form and we will tell you. Our process from visit to fitting.
What goes into it
- Radiator grilles
- Moisture-resistant MDF
- Hand-painted finish
- Birch plywood
- Spray-painted finish
- Lift-up lids or drawers