Example photo by Decima Athens on Unsplash, not our project
Newham · London
Bespoke kitchens in Temple Mills, Newham
Bespoke kitchens in Temple Mills: bespoke and fitted kitchens with cabinets made to the room. Each piece is designed at a visit to your home, built in our workshop and fitted by us.
- Spaces sized for your oven and fridge
- A central island in a larger kitchen
- A painted kitchen in a colour you choose
Need bespoke kitchens in Temple Mills?
How fitting works for bespoke kitchens
However carefully a piece is made in the workshop, it still has to meet the room, and fitting day is where that happens. Few walls in older London homes are truly flat or square, so we scribe the edges by hand to follow the wall. How long the fitting itself takes depends on the size of the kitchen and the design, and your quote sets out the fitting days. In a newer home, floors, walls and door frames are often freshly finished, so everything on the way in is covered before the sections arrive. Corners and door frames are covered as well. The sections are assembled in the room.
- You get in touch and tell us about the room and how you cook.
- We visit, measure the walls, floor and ceiling, and go through the design.
- A written quote follows, covering the cabinets, materials and finish, for you to read through.
- The units are made and finished in our workshop from moisture-resistant MDF and birch plywood.
- We fit the cabinets in your home; plumbing, gas and electrics are done by your plumber, a Gas Safe registered engineer and your electrician. We do not arrange those trades, so it is useful to book them early.
Before fitting day
- Arrange any electrical changes with your electrician in advance
- Leave a clear route from the front door to the room
- Mention any parking restrictions on your street
Starting with a design visit
You do not need exact measurements to get started. We measure everything properly during the design visit, including how level the floor and ceiling are. To arrange it, use our contact form. You receive a written quote after the visit.
Advice
Bespoke kitchens in Temple Mills
You choose the worktop, sink and appliances, and we design the cabinets around them. We plan each space around the appliances you have chosen, so everything fits as it should. The materials and finish are agreed in your quote. People normally come to us about cabinets that suit lean and sloping walls and a larder for food and small appliances; the furniture is made from MDF made to resist moisture and birch plywood, then spray-painted or hand-painted.
Many homes around Temple Mills have been built since 2000, and in newer homes the kitchen is typically part of an open-plan room. Cabinets can be designed for the open space, with an island if the room allows. Stud walls need wall cabinets fixed into the studs or with suitable fixings.
If the job needs another trade, such as an electrician or a plumber, we will tell you. The quote itself covers our work, from the design to the materials and finish.
- Place
- Temple Mills (E20, E15, E9)
- Area
- Newham
- Prices
- Quoted for your room
- First step
- Design visit, then a written quote
- Where it’s made
- Made in our workshop and fitted on site
- Boards and paint
- Painted MDF and birch ply
- When we fit
- Monday to Friday; Saturdays by prior arrangement
- Contact
- Send us a message
- Last updated
- 27 October 2026
Also near Temple Mills
Other services in Temple Mills
Common questions about bespoke kitchens
How do you fit bespoke kitchens in a flat in Temple Mills?
We measure the route in not just the room: the stairs, landings, lift and doors. The furniture is made in sections that fit the stairs and lift, and put together in the room. It helps to check any building rules and your lease before fitting day.
Can parking be tricky on fitting day in Temple Mills?
It can be, depending on whether your street is in a controlled parking zone. Depending on the street, a visitor permit, a paid bay or a bay suspension through the council may be needed, and suspensions often need notice. Let us know what parking is near you during the design visit, so we can plan the day around it.
What finishes do you offer?
You can choose between two finishes: by spray or by hand. A spray finish is smooth and even, while a hand-painted one is easy to touch up later.
Should I send pictures?
Yes, they help. A few pictures of the room, from floor to ceiling, tell us a lot. You can send them when you fill in our short enquiry form.
Does someone need to be home during the fitting?
We need someone to let us in at the start of the day. It also helps to have someone around at the end, so we can go over the finished furniture together.
Can you build an island in my kitchen?
Where space allows, yes. An island needs clear floor around it to open doors and move about, and we check this during the design visit. In a narrow kitchen, a longer run or a peninsula may suit better.
What affects the price in Temple Mills
To work out the quote, we look at:
- Where a van can park, such as a permit bay or a bay suspension
- Awkward walls, sloping ceilings and uneven floors
- The number of doors and drawers
- How big the furniture is
The finish affects the cost: spray painting is done in the workshop, while hand painting can be done on site. Your choice, along with the size and the fittings, is reflected in the written quote.
Getting in touch
When you contact us, these help most:
- The postcode, so we can plan the visit
- Pictures of styles you like, if you have any
- What the furniture needs to hold
- What kind of home it is, and which floor the room is on
The design visit is where every quote starts. We measure the room properly, check how the walls and floors run and go through the design with you. A quote in writing follows the visit. To arrange the visit, get in touch through our contact form.
Flats, conversions and lettings
In a managed block, the building manager or concierge may need notice before we arrive. Lifts sometimes need to be booked, and the lift size helps decide how big each section can be. Tell us about it when you get in touch.
Conversions and newer flats often have stud walls rather than solid brick. We choose fixings to suit the wall.
Bespoke kitchens for homes in Temple Mills
Homes built since 2000 make up about 84% of the housing in the streets around Temple Mills, with about 8% built between 1945 and 1972, in the VOA’s 2025 council tax stock figures. We take that into account during the design visit, since older and newer walls take different fixings. 4 conservation areas have at least part of their area less than a mile from the middle of Temple Mills. England has around 10,000 in all, and their controls are largely about how buildings look from outside. Purpose-built flats are home to about 82% of households in the area around Temple Mills, going by Census 2021 figures from the ONS. In a block, each section is sized to get up the stairs or into the lift and through the door. Building management rules on lifts, deliveries and working hours are worth checking early.
For families living near Chobham Academy, a drawer set aside for lunch boxes and water bottles keeps mornings calmer. If your home is as old as some of the listed buildings nearby, like Gainsborough School, original features like shutters, panelling and fireplaces are worth designing around. For a listed home, fixing into original features may need listed building consent.
Temple Mills is about 2 miles south-east of Plaistow, in the London Borough of Newham. Anywhere in Temple Mills, the process is the same: we visit and measure, send a written quote, make the furniture in our workshop and fit it. Our work takes in places right across Newham, from the busiest high streets to quiet residential roads.
We make bespoke kitchens across the E20, E15 and E9 postcode area for bespoke kitchens. Our area takes in homes on streets such as Major Road, Forbes Lane and Keirin Road, for bespoke kitchens and any of our other fitted furniture. Temple Mills sits close to the A106. If you are just outside Temple Mills, we also cover East Village (1 mile south-east), Hackney Wick (1 mile south-west), Stratford (1 mile south-east), Maryland (1 mile south-east) and Fish Island (1 mile south-west). Other parts of Newham we cover include Plaistow (2 miles south-east), Canning Town (3 miles south-east), Forest Gate (2 miles east), East Ham (3 miles south-east), Upton Park (2 miles south-east) and Greengate (2 miles south-east).
Local landmarks in Temple Mills
In Temple Mills, that includes homes near Eton Manor Boys' Club, Mossbourne Riverside Academy and The Cow pub and the streets around them. Temple Mills has its own railway station: Stratford International station. Other landmarks nearby include Westfield Stratford City (close by, under half a mile south-east) and V&A East (0.6 miles south). For a walk, there’s Old Ford Island.
The problems bespoke kitchens solve
In many older homes, ready-made units struggle with lean and slope. Gaps and wavy lines are hard to hide, and a bespoke kitchen is scribed and levelled to avoid that.
Here are some of the needs we are asked about most:
- A kitchen planned around your appliances
- A kitchen for a room that is not square
- A dresser that suits a period house
- An island where space allows
For a flat near Stratford International station, it helps to book the lift and tell the concierge before fitting day.
Before you choose who makes it
- Is it spray painted or hand painted?
- Whether they can show you real projects they’ve done
- Whether the quote follows a visit to your home
- Whether you’ll get a written quote, not just a figure
Before and after fitting day
New paint needs time to cure fully, so treat it gently at first. After that, a few simple habits help:
- Think about how you cook and what you store
- Choose your appliances before the design is final
- Measure the route into the kitchen
- Make sure an island won’t crowd the room
The appliances you have chosen come with their own care instructions, and the worktop you chose will have its own care advice too.
Talk to your plumber, electrician and a Gas Safe engineer early. Their work and ours need to fit together, and it’s easier when everyone works from the same design.