Bespoke fitted furniture across all 32 London boroughs and the City

Tower Hamlets · London

Fitted cupboards in North Greenwich, Tower Hamlets

Few London rooms are perfectly square, and we scribe the furniture to follow the walls. Our work on fitted cupboards in North Greenwich starts with a design visit, and everything is made at our workshop.

  • Somewhere for coats, shoes and bags
  • A cupboard for a recess or odd corner
  • Landing shelves for bedding and towels

Ask about fitted cupboards in North Greenwich

Making use of awkward spaces in North Greenwich

The biggest shares of homes in the streets around North Greenwich were built since 2000 (about 52%) and between 1973 and 1999 (about 24%), going by the Valuation Office Agency’s 2025 council tax figures. Knowing roughly when a home was built helps, because walls and fixings change from one era to the next. North Greenwich is partly covered by the Chapel House Conservation Area, one of the conservation areas recorded by Historic England. Conservation area controls are mainly about the outside of buildings, and fitted furniture inside a house does not normally need planning permission. If you want to be certain, ask the council’s planning team. About 83% of households in the neighbourhood around North Greenwich live in purpose-built flats, the 2021 Census shows. In a block, each section is sized to get up the stairs or into the lift and through the door. Many blocks have rules on lift booking and working hours, so check with the managing agent before fitting day.

For a flat near Greenwich station, the route in is measured not just the room, and the sections are sized to fit it. The wider area includes historic houses such as Queen's House, about 0.8 miles south-east. If your own home is a period one, an old boiler or airing cupboard can be rebuilt with proper shelves.

North Greenwich is in the London Borough of Tower Hamlets, about 3 miles north-west of Whitechapel. Homes in North Greenwich are part of the area we cover for fitted cupboards. Our Tower Hamlets coverage includes North Greenwich and the places around it.

Every home in E14, SE8 and SE10 is covered for fitted cupboards, from the main roads to the quieter streets. Streets in the area include Creek Road, Wynan Road and Undine Road, and we cover homes on all of them for fitted cupboards. Close by, we also work in Isle of Dogs (1 mile south-east), Millwall (1 mile west), Cubitt Town (1 mile north-east), Deptford (1 mile south-west) and Greenwich (1 mile south-east). Other parts of Tower Hamlets we cover include Whitechapel (3 miles north-west), Spitalfields (3 miles north-west), Tower Hill (3 miles north-west), Bethnal Green (3 miles north-west), Cambridge Heath (4 miles north-west) and Mile End (3 miles north).

Around North Greenwich

The streets we cover here include those near The Ferry House Public House, St. Paul's and Laban Centre, among other places. The nearest railway station is Greenwich station, about 0.8 miles south. Well-known places in the area include Surrey Quays Shopping Centre (1.3 miles west) and Greenwich Castle (1.1 miles south-east). Green spaces nearby include Sue Godfrey Nature Park.

Map of North Greenwich © OpenStreetMap contributors

Fitted cupboards for homes in North Greenwich

In many London hallways, space is tight, so a cupboard has to earn its place. A shallow cupboard can hold coats, shoes and bags without blocking the way, with hooks, a rail or shelves inside. A bench with a lift-up lid or drawers under it is another option, so there’s somewhere to sit by the door. Most enquiries start with storage for towels and bedding and cupboards for a utility or boot room; the furniture is made from moisture-resistant MDF and birch plywood, finished by spray or by hand.

Floors in newer homes are often finished and easy to mark, so they’re protected while storage is fitted. Many homes around North Greenwich were built since 2000, and stud walls there take fixings chosen for the board. Skirting can be scribed around, or the storage can sit on its own plinth.

The written quote is your record of the job. It describes the fitted cupboard we’ve designed for the room, what it is made from and how it’s finished, and the workshop works from it.

Illustration of painted fitted cupboards built into a hallway
Location
North Greenwich (E14, SE8, SE10)
Borough
Tower Hamlets
Price
Quoted for your room
How it starts
Design visit, then a quote in writing
Where it is made
Workshop-made, then fitted
Boards and paint
Painted MDF and birch ply
Fitting days
Monday to Friday; Saturdays by arrangement
Get in touch
The contact form
Last updated
27 October 2026

Your questions about fitted cupboards in North Greenwich

Can parking be tricky on fitting day in North Greenwich?

It can be, as controlled parking zones cover much of inner London. A van may need a visitor’s permit, a paid parking bay or a bay suspension, which the council arranges, often with notice. Let us know what parking is near you at the design visit, and we’ll plan around it.

Do I need permission for fitted furniture in a conservation area?

Typically not: conservation area rules mainly cover the outside of buildings, and fitted furniture inside a house doesn’t normally need planning permission. If your home is listed, works inside that affect its character can need listed building consent, so check with the council first. The council’s planning or conservation team can tell you if in doubt.

Can you make cupboards for a utility room?

Yes, we plan the room around what needs storing such as boots, coats, laundry and the vacuum. We’re carpenters, so plumbing and wiring are for your other trades.

How do you get the furniture up the stairs?

Getting it in is planned at the measuring visit. We measure the stairs, landings, lift and doors, and each section is made to a size that will get through.

Can you build a cupboard around a boiler?

Yes, as long as the design respects the boiler’s instructions. We plan the space and ventilation around it and keep access clear for the engineer.

How much does a fitted cupboard cost?

Your quote is written for your room once we’ve visited and measured. Size, fittings and finish all affect the price. To arrange a design visit, fill in our short enquiry form.

Flat-pack or bespoke?

What you pay for with bespoke is mainly the fit: scribed edges, a level base on an uneven floor and furniture that meets the ceiling, skirting and picture rail. In an older room, standard units rarely manage that.

Flat-pack and off-the-shelf furniture has its place. If the walls are straight and the space suits standard sizes, it often does the job.

Made for the room, or bought in a box?

A flat-pack or ready-made cupboard is quick to buy and often cheaper, and in a square room they can work well. Where walls lean and floors slope, they rarely sit flush. A fitted cupboard is a bigger outlay, but it fits the space it is built for. In a newer flat, big flat-pack units can be hard to get into the lift or through the door, while fitted furniture comes in sections sized for the route. The sections are joined and fixed once inside.

Every room is priced on its own, because size, layout and finish change from job to job. A spray finish and a hand-painted finish involve different work, and that shows in the price. The figure comes in your written quote after the design visit.

Why work with us in North Greenwich

  • 300+ projects completed
  • Edges scribed to follow your walls
  • A design visit, then a written quote
  • Work across the whole of London

Read how bespoke compares with ready-made or what to look for in a quote.

What fitted cupboards can’t fix

Not everything around fitted cupboards is carpentry, from an electrician to a plumber or a Gas Safe engineer. Here’s what to know:

  • Making good walls after other work
  • New sockets, lighting or wiring (your electrician)
  • Moving gas or electricity meters

If you’re not sure what’s possible in your room, you can tell us about the room on our contact form and we will give you a straight answer. How a job runs, step by step.

What goes into it

  • Moisture-resistant MDF
  • Adjustable shelves
  • Hand-painted finish
  • Spray-painted finish
  • Birch plywood
  • Ventilated doors

Do you need fitted cupboards in North Greenwich?

The usual reason is simple: there is too much stuff and not enough storage. Coats end up over the banister and shoes spread across the hall. A fitted cupboard gives those things a proper home and leaves the room around it clear.

Some of the things we’re asked to solve include:

  • Boxing in a boiler with room for servicing
  • Storage for coats and shoes in the hallway
  • Storage for towels and bedding
  • Cupboards that sit well with skirting and coving

If your home is one of the older houses near Church of St Nicholas, a shallow cupboard in a narrow hall can hold coats without blocking the way.

Before you choose who makes it

  • Will the doors close with even gaps?
  • Is it spray painted or hand painted?
  • Who does any electrics, plumbing or gas work
  • Whether the quote says what the furniture is made from

Choosing a carpenter in London: a checklist

What happens on fitting day

Fitting day follows a set order: floors are protected, the sections come in, everything is levelled, scribed to the walls, fixed and finished. Then the room is tidied and we look over the work with you. How long fitting takes depends on the number of cupboards and the space they fit into, and the fitting days are agreed in your quote. Walls in newer homes are often plasterboard on studs, so fixings go into the studs or use fixings made for the board. Floors are protected throughout, as many newer homes have finished floors that mark easily, and dust is kept to a minimum.

  1. We start with a short note from you about the space and what it needs to hold.
  2. We visit, take careful measurements and go through the design with you.
  3. We send a quote that sets out the design, the materials and the finish.
  4. We make the carcasses, doors and shelves in our workshop.
  5. The cupboards are fitted in your home and trimmed to follow the walls.

How to prepare

  • Empty the space we will be working in
  • Get any new sockets or wiring done by your electrician before fitting day
  • Clear the hallway and stairs so the sections can come through

Starting with a design visit

You don’t need exact measurements to get started. Everything is measured properly when we visit, including how level the floor and ceiling are. To get started, send us a few details through our contact form and tell us about the room. The written quote follows the visit.

Book a design visit

Advice

300+ projectsCompleted in London homes
Design visit firstWe measure, then quote
Workshop-madeThen fitted in your home
MDF and birch plywoodMoisture-resistant MDF
Painted finishesSpray or hand-painted
All of London32 boroughs and the City