Tower Hamlets · London
Fitted cupboards in Spitalfields, Tower Hamlets
Walls in older London homes are rarely straight, so we scribe the furniture to follow them. Our work on fitted cupboards in Spitalfields starts with a design visit, and everything is made at our workshop.
- Cupboards that sit well with skirting and coving
- A hallway cupboard for coats and shoes
- A cupboard for a recess or odd corner
Fitted cupboards designed for your room
Fitted cupboards for homes in Spitalfields
The carcasses and doors are made from moisture-resistant MDF or birch plywood, depending on what each part needs to do. MDF is stable and takes paint well, while birch plywood is good for long shelves. The finish is either spray painted in our workshop or hand painted, in the colour you choose. If your home has a linen cupboard on the landing and somewhere for coats, shoes and bags, that’s what fitted cupboards are for, made from moisture-resistant MDF and birch plywood, spray-painted or hand-painted.
Newer homes tend to have finished floors that scratch easily, so we cover them while we work. Around Spitalfields, many homes date from 2000 onwards, and stud walls there take fixings chosen for the board. The storage can sit on its own plinth or be scribed over the skirting.
The written quote puts the design visit in writing: the layout, what goes inside, the materials used and the finish. If you’d like to change anything, it is easier before the furniture is made.
- Location
- Spitalfields (E1, EC2A, E1W)
- Area
- Tower Hamlets
- Price
- Quoted for your room
- First step
- A design visit: we measure and talk it through
- Making
- Made in our workshop and fitted on site
- Boards and paint
- MDF and plywood, painted to order
- Fitting days
- Weekdays, and Saturdays by arrangement
- Get in touch
- The contact form
- Last updated
- 27 October 2026
From workshop to your room
Once the main sections are fixed in place, any doors go on and any drawers or lids are fitted. We adjust each one so the gaps line up and it closes cleanly, and then we check it all again. How long the fitting takes depends on the size of the cupboards and the room, and the fitting days are agreed in your quote. In a newer home, floors, walls and door frames are often freshly finished, so we protect the route before carrying anything in. Corners and door frames are covered as well. Once inside, the pieces are joined in place.
- You get in touch and tell us whether the cupboard will house a boiler, meters or a fuse board.
- At the design visit we measure up and note the clearances and ventilation the boiler manufacturer asks for. Boiler work itself is for a Gas Safe engineer.
- You receive a written quote for the cupboards.
- We make the cupboards in our workshop from moisture-resistant MDF and birch plywood, with vents and access panels where they’re needed.
- The cupboards are fitted and set level, and we check the access with you.
Preparing the room
- Mention any parking restrictions on your street
- Keep pets in another room while we work
- Take down pictures, mirrors and shelves from the wall
How to get a quote
A quote begins with a few details from you: the room, rough measurements and some photos if you have them. To send them, message us from the contact page. After that, we arrange a visit to measure and go through the design, then send a quote in writing.
Related advice
Why people ask for fitted cupboards in Spitalfields
Most people come to us because things have nowhere to go. Coats pile up on the newel post, shoes gather by the door and the vacuum lives in a corner. A cupboard built for the space gives everything a place and clears the floor.
Common reasons to get in touch include:
- Boxing in a boiler with room for servicing
- Storage for coats and shoes in the hallway
- A cupboard for the meters with easy access
- A utility room with proper storage
Mansion House, about 0.7 miles west, is one of the historic houses in the wider area. For a period home anywhere nearby, a shallow cupboard in a narrow hall can hold coats without blocking the way.
Choosing a carpenter
- A written quote that sets out the job
- Will other trades be needed, and who arranges them?
- Have they thought about parking near you?
- How they deal with uneven walls and floors
Fitted storage in Spitalfields
About 45% of the homes in the streets around Spitalfields went up since 2000, and about 19% before 1919, based on the Valuation Office Agency’s 2025 council tax data. For carpentry, the era of a house is a useful clue to how square its rooms are and what its walls are made of. Near the centre of Spitalfields, Historic England’s list includes Church of St Botolph (Grade I), under half a mile south, and Church of St Katherine Cree (Grade I), less than half a mile south-west. Where a home is listed, listed building consent can be needed for inside works that affect its character, like fixing into original panelling. An early word with the council’s conservation officer is the best first step. TfL’s Ultra Low Emission Zone covers every part of London, Tower Hamlets included. It applies to every van that comes to fit furniture in Spitalfields. Access and parking are talked through at the measuring visit.
For a family home near Makers Academy, fitted cupboards can give school bags, shoes and sports kit a proper home. Living in a block of flats near London Liverpool Street station? Then the lift, the stair turns and the front door all set the largest piece that can come in.
Spitalfields is part of the London Borough of Tower Hamlets, about 1 mile east of Whitechapel. Anywhere in Spitalfields, the process is the same: a design visit, a quote in writing, furniture made at our workshop and fitting in your home. Spitalfields is one of 31 places on our list for Tower Hamlets.
We make fitted cupboards across E1, EC2A and E1W for fitted cupboards. Whether you live on a street such as New Road, Mark Lane and Bell Lane or on one nearby, we can arrange a design visit for fitted cupboards. Spitalfields sits close to the A10 and A1202. If your home is on one of them, tell us at the measuring visit, as some main roads have strict stopping rules. Other places close to Spitalfields include Whitechapel (1 mile east), Aldgate (1 mile south-west), Bishopsgate (1 mile west), Tower Hill (1 mile south) and Shoreditch (1 mile north). Other parts of Tower Hamlets we cover include Cambridge Heath (2 miles north-east), Mile End (2 miles east), Bow Common (2 miles east), Bromley (3 miles east), Limehouse (2 miles east) and Old Ford (3 miles north-east). Spitalfields is one of the larger places we cover in Tower Hamlets.
Around Spitalfields
Our area takes in the homes around Kings Stores pub, Bishopsgate Institute Special Collections and Archives and St Mary-at-Hill and the streets around them. You will also find Canon Barnett Primary School (within half a mile east) and London Enterprise Academy (0.5 miles east). Spitalfields has its own railway station: London Liverpool Street station. Other landmarks nearby include Tower of London (0.6 miles south) and Gabriel's Wharf (1.5 miles west). Not far away are Tower Hill.
Flats, blocks and rented homes
Conversions and newer flats often have stud walls rather than solid brick. Fixings are chosen to suit whatever the wall is made of, after checking the walls at the measuring visit.
Mansion blocks and purpose-built blocks often have house rules about lifts, entry systems and when trades can come in. Let us know about them during the design visit, so fitting day is planned around them.
Also near Spitalfields
Also in Spitalfields
Questions from Spitalfields
Do you cover homes near London Liverpool Street station?
Yes. We cover all of Tower Hamlets and the rest of London. To get started, you can fill in our short enquiry form with some details about the room.
Is Spitalfields in the area you cover for fitted cupboards?
Yes. Spitalfields is one of the places we work, along with the rest of Tower Hamlets and London. To get started, you can message us from the contact page with some details.
Can you hide my gas and electricity meters?
Yes, and we keep them easy to reach. Engineers and meter readers will need access, so the doors or panels are planned to open easily.
What if the wall is cold or damp?
It can be done with some care: leaving ventilation behind and inside helps stop condensation. We don’t treat damp, so any damp should be sorted before fitting day.
Do I need to be in when you fit?
We need someone to let us in at the start of the day. It is good to have someone there at the end to look over the work with us.
Do I get to choose the colour?
You choose it. We agree the colour with you.
Honest limits
We’d rather be clear about where our work stops:
- Plumbing for washing machines or sinks (your plumber)
- Moving gas or electricity meters
- Plastering, decorating or repairs to the walls
Not sure whether your space suits fitted cupboards? You can fill in our short enquiry form and we will tell you. Our process from visit to fitting.
What goes into it
- Birch plywood
- Hand-painted finish
- Spray-painted finish
- Adjustable shelves
- Ventilated doors
- Moisture-resistant MDF
Tips worth knowing
A little care keeps the finish looking good. Here are our suggestions:
- Make a note of what needs a home
- Let us know how parking works on your street
- Treat new paintwork gently at first
- Measure the route into the room as well as the room
We adjust the doors as part of the fitting. Timber and walls shift slightly through the year, so the hinges allow small adjustments later. If a door catches, it is usually a small hinge adjustment.
Leasehold flats can have rules about alterations, so check your lease first. We cannot advise on your lease, and it is best done early.