Example photo by Kirsten Miles on Unsplash, not our project
Hammersmith and Fulham · London
Loft Storage in White City
Eaves cupboards, drawers and wardrobes in converted lofts, for homes in White City. Every piece is made at our workshop and fitted in your home, with a spray or hand-painted finish.
- No wardrobe that fits under the slope
- A loft room that doubles as an office or guest room
- A dormer that isn’t being used
Ask about loft storage in White City
Bespoke or off-the-shelf?
It is worth being honest about cost: flat-pack is normally cheaper to buy. Bespoke makes more sense where the room is awkward, the space is valuable or you want the furniture to look built in.
If you’re handy, a simple shelf or a standard wardrobe in a square room is a reasonable DIY job. It gets harder with sloping ceilings, out-of-level floors and lath-and-plaster walls, where scribing and fixings that suit the wall are important.
How we make loft storage for White City
Getting furniture up to a loft room is part of the planning. We measure the route as well as the room, so every section made in our workshop fits up the stairs. It’s a step that matters for any loft in White City. If your home has a dormer that isn’t being used and a boarded loft that’s hard to keep organised, eaves cupboards made from moisture-resistant MDF and birch plywood, finished by spray or by hand can solve it.
Not every home has a loft conversion, a bay or a cupboard under the stairs, but almost every home has somewhere storage could go. For a home in White City, the design visit is where the options are worked out. Eaves cupboards are then made at our workshop and fitted on site.
The furniture is built in our workshop after you’ve had the quote and decided to go ahead. The quote sets out the agreed design, materials and finish, so you can check every detail beforehand.
- Location
- White City (W12, W11, W10)
- Borough
- Hammersmith and Fulham
- Cost
- Quoted for your room
- First step
- Design visit, then a quote in writing
- Where it’s made
- Made in our workshop and fitted on site
- Materials and finish
- MDF and birch plywood, painted
- When we fit
- Weekdays; Saturdays on request
- Get in touch
- Our contact form
- Page updated
- 27 October 2026
Fitted storage in White City
Homes built before 1919 make up about 43% of the housing in the neighbourhood around White City, with about 18% built between 1919 and 1939, on the Valuation Office Agency’s council tax figures for 2025. It is a good starting point, though every room is still measured, as two homes of the same age rarely match. The National Heritage List records 13 entries within half a mile of the centre of White City. You can check whether a particular building is listed on Historic England’s list. All of London, Hammersmith and Fulham included, is inside the ULEZ. It applies to every van that comes to fit furniture in White City. Parking and access are planned at the measuring visit.
If you live in a flat close to Shepherds Bush station, check any building rules on lifts and working hours early, and the sections will be sized for the way in. The wider area includes historic houses like Leighton House, about 1.3 miles south-east. For a period home anywhere nearby, the knee walls of a converted loft can take drawers as well as cupboards. If you live in a period home close to St Michael and St George, sloping ceilings in a loft room suit wardrobes cut to the angle.
White City is about 2 miles south of Fulham, within the London Borough of Hammersmith and Fulham. White City is part of the area we cover, and the process is the same everywhere we work. In Hammersmith and Fulham, White City is one of the places we cover, and the borough has 16 places on our list.
Every home in W12, W11 and W10 is covered for loft storage, from the main roads to the quieter streets. Whether you live on a street such as Bard Road, Wood Lane and Abdale Road or on one nearby, we can arrange a design visit for loft storage. Other places close to White City include Shepherd's Bush (1 mile south), Notting Dale (1 mile east), North Kensington (1 mile north), Notting Hill (1 mile east) and Kensal Town (1 mile north-east). Other parts of Hammersmith and Fulham we cover include Fulham (2 miles south), Parsons Green (3 miles south), Walham Green (3 miles south-east), West Brompton (2 miles south-east), Hurlingham (3 miles south) and Chelsea Harbour (3 miles south-east).
What’s near White City
We fit furniture in homes around Polish Library POSK in London, Star Chamber Academy and Kensington Aldridge Academy and the streets around them. For rail, the closest station is Shepherds Bush station, about 0.5 miles south-east of the centre. Well-known places in the area include Princess Louise Hospital (0.5 miles north) and Culture House (0.5 miles south). For a walk, there is Campden Hill.
Also near White City
More for homes in White City
Pricing loft storage in White City
Prices vary from room to room, and it comes down to:
- The finish: spray painted or hand painted
- Parking and unloading on your street
- Walls and floors that are out of level or out of square
- The internal fittings
Getting to the room affects the job as well. Several flights of stairs, a small lift or a narrow hall can mean smaller sections and more carrying. Prices are quoted for your room, once we’ve measured and talked through the design.
Before the design visit
A few details help us understand the job before we visit. When you get in touch, it helps to send:
- Anything fixed to the wall that the furniture needs to work around
- Your postcode and the borough
- Approximate measurements of the space
- Whether it’s a house or a flat, and if there are stairs or a lift
You do not need exact measurements to get started. Everything is measured properly when we visit, along with the walls, floor and ceiling. To get started, use our contact form. The written quote follows the visit.
How it’s made
Moisture-resistant MDF
In a loft, stability matters, and moisture-resistant MDF is stable. It takes a spray-painted or hand-painted finish well. It is used for most of the visible parts.
Doors and drawer fronts
An access door into the eaves can match the rest of the fronts. It opens fully, so the space behind can still be reached. The other fronts can be doors, drawers or both.
What we do not do
We design, make and fit the furniture. In practice, that means:
- New sockets, lights or wiring, which are for your electrician
- Building work to turn a loft into a room
- Adding or replacing insulation
If you’re not sure what’s possible in your room, you can drop us a line using the contact form and we will give you a straight answer before you arrange a visit. How it works.
What it’s made from
- Spray-painted finish
- Moisture-resistant MDF
- Birch plywood
- Sloped wardrobe tops
- Eaves doors and drawers
- Hand-painted finish
Your questions about loft storage in White City
Will a conservation area stop me having loft storage fitted in White City?
Typically not: conservation area rules mainly cover the outside of buildings, and fitted furniture inside a house does not normally need planning permission. Listed buildings are different, as works inside that affect their character may need listed building consent from the council. If you’re unsure, the council can confirm.
Is White City in the area you cover for loft storage?
Yes. White City is one of the places we work, along with the rest of Hammersmith and Fulham and London. To get started, you can message us from the contact page with a few details.
How long does it take to fit loft storage?
The time the fitting takes depends on the shape of the room and the number of cupboards and drawers, and your quote sets out the fitting days. We make the cupboards and drawers in our workshop, so the time at your home is spent fitting. Saturday fitting is possible by arrangement.
What materials do you use for loft storage?
The storage is made from moisture-resistant MDF and birch plywood. The carcasses and drawer boxes are birch plywood, which is strong and holds screws well, while the doors and panels are MDF, which paints well. The finish is spray-painted or hand-painted.
Can you fit furniture to uneven walls?
That’s normal in older homes, and it’s what scribing is for. We scribe the edges to follow the wall and set the furniture level on adjustable feet or a plinth.
Is an outside wall a problem for fitted furniture?
It needs a little planning: leaving ventilation behind and inside helps stop condensation. We don’t treat damp, so any damp should be sorted before fitting day.
From workshop to your room
On the morning of the fitting, we start by protecting your floors and the route from the front door to the room. Next, we carry in the sections built in our workshop. How long fitting takes depends on how much storage you want in the loft, and the fitting days are agreed in your quote. For a flat, building rules and lift booking are worth checking early; if you live in a house, let us know about steps, paths and parking. Either way, the day is planned at the measuring visit. Saturdays can be arranged.
- You get in touch with a few details about the loft room.
- We visit to measure and look at what’s behind the knee walls, and go through the design with you.
- A quote in writing follows, with the fitting days agreed. You can ask us about any of it.
- We make the cupboards and drawers in our workshop, cut to the slope.
- We fit it in your home and leave it ready to use, with the doors and drawers checked with you.
Getting ready for fitting day
- Let us know where the boiler and meters are
- Check the building’s rules for trades and lift bookings
- Arrange any electrical changes with your electrician beforehand
Ask for a quote
It’s useful to see the room before we come. Pictures of the whole wall, the corners and the ceiling line give us a good feel for the space. To send them over, get in touch through our contact form, and we will arrange a design visit.