Example photo by Decima Athens on Unsplash, not our project
Brent · London
Bespoke Kitchens in Kenton
Thinking about bespoke kitchens in Kenton? We start with a design visit and a written quote, before anything is made.
- A kitchen island with room around it
- Cabinets that suit lean and sloping walls
- Room for everything in the kitchen
Bespoke kitchens for your home in Kenton
Bespoke kitchens for homes in Kenton
About 84% of the homes in the neighbourhood around Kenton went up between 1919 and 1939, and about 7% between 1945 and 1972, going by the Valuation Office Agency’s 2025 council tax figures. Knowing roughly when a home was built helps, because walls and fixings change from one era to the next. Kenton is partly covered by a conservation area, according to Historic England’s records. Conservation area rules mainly cover the outside of buildings, so fitted furniture inside a house doesn’t normally need planning permission. The council can confirm if you are not sure. More than half of the homes in the neighbourhood around Kenton (about 84%) date from between 1919 and 1939, going by the Valuation Office Agency’s 2025 council tax figures. Interwar houses often started with a small kitchen that has since been extended or opened up, so the cabinets are made for today’s layout.
If your home is as old as some of the listed buildings nearby, such as Church of St Mary and Parish Hall, original features like shutters, panelling and fireplaces are worth designing around. For a listed home, fixing into original features can require listed building consent. Close to Preston Park? A cupboard by the back door for boots and coats can be built in with the kitchen. For families living near St Gregory's Catholic Science College, a tall cupboard by the door can take school bags and coats as part of the kitchen.
Kenton is about 6 miles south-east of Kilburn, within the London Borough of Brent. Kenton is part of the area we cover, and the process is the same everywhere we work. We list Kenton among 29 places we cover in Brent.
Every home in HA3, HA7 and HA1 is covered for bespoke kitchens. Whether you live on a street like Retreat Close, Kenton Road and Woodgrange Avenue or on one nearby, we can arrange a design visit for bespoke kitchens. The A4006 run close to Kenton, so if your home is on a main road, mention it when you contact us. Nearby, we also make bespoke kitchens in South Kenton (1 mile south), Northwick Park (1 mile south-west), Greenhill (1 mile west), Wealdstone (1 mile north-west) and Harrow on the Hill (2 miles south-west). Elsewhere in Brent, we also cover Kilburn (6 miles south-east), Neasden (3 miles south-east), Harlesden (4 miles south-east), Wembley (2 miles south), Queen's Park (6 miles south-east) and Church End (4 miles south-east).
Landmarks near Kenton
We fit furniture in homes around Uxendon Manor Primary School and The New Moon pub. For rail, the closest station is Kenton station, roughly 0.5 miles south-west of the centre. Nearby you’ll also find St. Mark's Hospital (0.9 miles south-west) and St. Anns (1.3 miles west). Open spaces near Kenton include Masons Field.
How we make bespoke kitchens for Kenton
We make kitchens for homes in Kenton and across London. We begin with a design visit, measuring the room and planning the layout, followed by a quote. The cabinets are built in our workshop and fitted in your home. The time the fitting takes depends on how many units there are and how the room is laid out, and we confirm the fitting days in your quote, so you can plan around it. We make kitchens from birch plywood and moisture-resistant MDF with a spray-painted or hand-painted finish, and the things people most often want solved are a kitchen for a room that isn’t square and cabinets built around the appliances you choose.
Knocked-through kitchen-diners in older semis sometimes keep a chimney breast, which can frame a dresser or tall cupboards. Around Kenton, where interwar homes and semis are a big part of the housing, the design can make the most of it. Any capped chimney stays ventilated.
You get the quote in writing, so you can read it at your own pace. It records the design, the materials and the finish we discussed.
- Location
- Kenton (HA3, HA7, HA1)
- Area
- Brent
- Prices
- Quoted for your room
- How it starts
- A design visit: we measure and talk it through
- Where it is made
- Workshop-made, then fitted
- Materials and finish
- MDF and plywood, painted to order
- Working days
- Monday to Friday; Saturdays by arrangement
- Enquiries
- Send us a message
- Updated
- 27 October 2026
How fitting day works
When the fitting is done, we tidy the room and take up the floor coverings. Before we go, we look over the finished furniture with you and explain how to look after the paint. How long the fitting takes depends on how many units there are and how the room is laid out, and the fitting days are agreed in your quote. It is useful to clear the room and the route before we arrive. Fitting day starts with protecting the floors and setting out the pieces. The pieces are levelled, fitted to the walls and fixed back.
- We start with how you cook and what the kitchen needs to hold. Larders, dressers and islands can all be part of it, where space allows.
- At the design visit we measure the walls, floor and ceiling and plan the layout. We note where the water, gas and sockets are now.
- A quote follows, covering the design and finish.
- We build and finish the kitchen in our workshop. The materials are moisture-resistant MDF and birch plywood.
- Fitting day: we fit the cabinets, and your plumber, electrician and a Gas Safe engineer handle the services.
Before fitting day
- Point out meters, boilers and fuse boards near the furniture
- Move furniture and belongings away from the wall
- Make sure pets are kept safely away
How to get a quote
Getting a quote starts with some details: the room, rough measurements and some photos if you have them. When you’re ready, send us a few details through our contact form. After that, we arrange a visit to measure and talk through the design, then send a written quote.
Advice
FAQs: bespoke kitchens in Kenton
Does a conservation area in or near Kenton affect fitted furniture?
Usually not: conservation area rules mainly cover the outside of buildings, and fitted furniture inside a house does not normally need planning permission. Listed buildings are different, as works inside that affect their character can need listed building consent from the council. If you’re unsure, the council can confirm.
Do you cover homes near Kenton station?
Yes. We cover all of Brent and the rest of London. To get started, you can use our contact form with some details about the room.
Can you come on a Saturday?
Yes, by arrangement. Tell us when you get in touch if a Saturday suits you best.
Do you do the plumbing and electrics?
No, those are jobs for other trades. Your plumber connects the sink and dishwasher, an engineer on the Gas Safe Register handles any gas, and your electrician does the wiring, and we fit the cabinets.
What happens when you come to measure?
It’s a chance to measure properly and talk through what you’d like. We also check the walls and floors and note radiators, sockets and other things in the way, then send a written quote.
Can I have a kitchen island?
If there is enough room, yes. There has to be comfortable space on every side, and we measure for it at the measuring visit. In a narrow kitchen, a longer run or a peninsula may suit better.
What it costs
We quote each job after the design visit, because no two rooms are the same. This is what makes the difference:
- How square the room is
- How big the furniture is
- Doors and drawers, and how many
- Hanging rails, shelves, drawers and other fittings inside
The inside of the furniture affects the price as well: drawers take more making than shelves, and each rail, divider or pull-out adds to the work. We will talk through what you need inside at the measuring visit, then set it out in the quote.
Before the design visit
When you contact us, these help most:
- A few photos of the space, taken from the doorway and from each corner
- Radiators, sockets, pipes or meters on or near the wall
- What the furniture needs to hold
- Your postcode and the borough
Rough sizes are fine at the start. We measure everything properly at the measuring visit, including how level the floor and ceiling are. To arrange it, tell us about the room on our contact form and tell us about the room. The written quote follows the visit.
Bespoke or off-the-shelf?
A bespoke kitchen takes more planning than picking units from a range. What you get is a kitchen planned around how you cook and live. If a house has been extended or knocked through, the new walls and the old ones may not line up, and straight-sided ready-made units make that obvious. Built-in pieces are scribed to take up the difference.
The price comes in a written quote, worked out from the measurements and the design you choose. Bigger pieces use more board and take longer to make and fit, so size is the starting point. Doors, drawers, internal fittings and the finish make up most of the rest.
What you get with us
- 300+ projects completed
- Spray painted or hand painted, in the colour you choose
- Fitted tight to walls that aren’t straight
- Moisture-resistant MDF and birch plywood
See bespoke vs off-the-shelf or what a quote should include.
Boards, parts and paint
Moisture-resistant MDF
Most painted kitchen doors we make are moisture-resistant MDF, because it stays flat.
Plinths and scribe strips
Scribing is how cabinets meet a wall that is not flat for a close fit.
Nearby places to Kenton
Other services in Kenton
When is bespoke worth it?
A confident DIYer can manage simple shelves or a standard wardrobe in a square room. Sloping ceilings, uneven floors and lath-and-plaster walls make it harder, where scribing and fixings that suit the wall are important.
It’s worth being honest about cost: flat-pack is typically cheaper to buy. Bespoke earns its place where the room is tricky, space is tight or you want the furniture to look part of the house.